D-VXR-OE-01 Dell VxRail Operate v2 Exam Free Dumps

dumps2025-06-09T10:56:25+08:00

D-VXR-OE-01 Dell VxRail Operate v2 Exam focuses on the overall product, hardware, and software components within a VxRail cluster. There are 48 questions in real Dell Technologies D-VXR-OE-01 exam, and you have 120 minutes to answer all the qustions. The required passing score for D-VXR-OE-01 exam is 63%. The available language is English. We provide the latest Dell VxRail Operate v2 D-VXR-OE-01 exam dumps, which can ensure you pass the test easily. Free Dell VxRail Operate v2 D-VXR-OE-01 exam dumps are available below.

Page 1 of 9

1. What is the maximum number of racks supported when expanding a VxRail cluster beyond a single physical rack?

2. What is the correct order of steps to create a VM for a new project using vSAN and VxRail?

3. How many Failures to Tolerate can be configured with vSAN RAID-1?

1 only

1 or 2 only

1, 2, or 3

4. A VxRail administrator wants to rename the VxRail cluster and the VxRail vSAN datastore.

What is the recommended method to make these changes?

Refer to the VMvvare vSphere and vSAN documentation Follow the steps detailed in the VMware documentation

Renaming the objects is not permitted Rebuild the cluster with the desired names

Use SolVe to generate the relevant procedures Follow the steps detailed in the procedures

Refer to the VxRail Appliance Administration Guide Follow the steps detailed in the guide

5. A VxRail administrator observes alarms that start with VXR in the vSphere client.

How can they obtain information about the alarms and the related knowledge base articles?

Go to the Alarm Definitions page and click the KB link.

Use the VxRail Event Code Reference.

Use the VxRail Administration Guide.

Consult the General VMware Knowledge Base.

6. VxRail Manager provides a software stack for a software-defined data center.

Which layers are part of the stack?

Storage, security, and management

Security, management, and network

Network, storage, and security

Management, network, and storage

7. Create a VDS with the required number of uplinks.

8. A VxRail administrator wants to determine how long the rebuild will take after experiencing a disk failure in the vSAN Cluster.

Where is this information located in the vSphere Client?

Configure > vSAN > Services > Object repair timer

Monitor > vSAN > Resyncing Objects

Monitor > vSAN > Data Migration Pre-Check

Configure > vSAN > Disk Management

9. What is the correct path for editing the Object Repair Time from the vCenter client?

Host > Monitor > vSAN > Services > Object Repair Timer (Repeat for each host)

Cluster > Monitor > vSAN > Services > Object Repair Timer

Cluster > Configure > vSAN > Services > Advanced Options > Edit

Host > Configure > vSAN > Services > Advanced Options > Edit (Repeat for each host)

10. Where in the VxRail Plugin can log bundles be generated?

Monitor > VxRail > Issues and alarms

Configure > VxRail >Troubleshooting

Monitor > VxRail > Security

Configure > VxRail > Support

Page 2 of 9

11. A customer has a large storage capacity and low I/O performance requirements.

Which VxRail solution is the best fit?

E Series

P Series

S Series

V Series

12. What is true about Multitrack VxRail cluster expansion?

All VxRail networks are routable by default

VxRail nodes in the same cluster within a rack can be on different subnets

VxRail cluster can be expanded up to a maximum of 4 racks

VxRail System VMs run on the nodes in the first rack

13. An administrator wants to perform maintenance on a VxRail system.

Which configuration should be used for the VxRail Cluster Health Monitoring before starting the maintenance activity?

Maintenance mode

Disabled

Enabled

Suspended

14. Using VxRail Manager, what information can you find under the physical health view?

Model, Temperature, Memory, and Health State

Cluster ID, PSNT, Model, and Temperature

PSNT, Operational Status, Health State, and Memory

Cluster ID, Connected, Health State, and Operational Status

15. When configuring Data at Rest Encryption (DARE) on a vSAN cluster, what is required?

vSAN Standard

vSAN Advanced

External Key Management Server

Internal Key Management Server

16. What VxRail Manager activities can be performed by a user with the VMware Administrator role?

Build, Manage, Expand, and Shutdown Cluster only

Build, Manage, and Expand Cluster Manage HA, DRS, and vSAN settings

Build, Manage, and Expand Cluster only

Build, Manage, and Shutdown Cluster Manage vSAN settings

17. The vSphere Client is showing several failures on node 3. Support recommends opening an SSH session to troubleshoot. The connection fails to establish.

Which path should be used to enable SSH on the host from vSphere Client?

Host > Configure > VxRail > Enable SSH

Cluster > Configure > VxRail > Hosts > Enable SSH

Cluster > Monitor > System > Services

Host > Configure > System > Services

18. In a VxRail appliance, what does vSAN use in the form of flexible data containers to store and manage data?

Logical volumes

nodes

Datastores

Objects

19. What is used in the VxRail infrastructure to manage multiple clusters of ESXi servers?

Host client

vCenter

VxRail Manager

ESXi

20. As a VxRail administrator you have been asked to configure vSAN fault domains After selecting the VxRail cluster, where would you navigate to in vCenter to accomplish this task?

Configure > vSAN > Disk Management > Fault Domains & Stretched Cluster

Configure > vSAN > General > Fault Domains & Stretched Cluster

Configure > vSAN > Fault Domains & Stretched Cluster

Configure > vSAN > Configuration Assist > Fault Domains & Stretched Cluster

Page 3 of 9

21. What is the VxRail API path for downloading the log bundle?

/v1/support/logs/(Log ID)

/v1/requests/(Request ID)

/v1/support/logs

/v1/support/logs/(Log ID)/download

22. What enables an administrator to download qualified software products for the VxRail System?

Secure Remote Services

MyVxRail

VxRail Market

vSphere Update Manager

23. VxRail Stretched cluster deployment with eight nodes at each data site is being proposed.

What is the latency requirement between each data site and the Witness site?

Less than 100 ms

Less than 200 ms

Less than 10 ms

Less than 5 ms

24. A VxRail deployment has eight nodes. The VxRail administrator does not find any compatible datastores when trying to create a storage policy with FTT=2 and FTM=Erasure Coding.

What is the likely reason?

Fault domains have not been configured yet

vSAN capacity reserve has been enabled

vSAN datastore used capacity is above 80%

Erasure coding is only supported on all-flash systems

25. What is the maximum number of nodes supported in a VxRail cluster with 1 GbE networking?

26. Which system components are managed through a vCenter plug-in?

RecoverPoint for Virtual Machines vSphere

Secure Connect Gateway vSphere

VxRail Manager RecoverPoint for Virtual Machines

VxRail Manager Secure Connect Gateway

27. An administrator is tasked with remediating the identified security vulnerabilities in the VxRail cluster. The administrator needs more information to resolve the security issues.

What should be used to gather the required information?

Advisories

Event Codes

Health Analyzer

Skyline Health

28. A failure occurs while upgrading a VxRail cluster.

Which log file should be analyzed?

loudmouth.log

platform_svc.log

marvin.log

lcm-web.log

29. A VxRail administrator wants to monitor vSAN Backend IOPS, Throughput, and Latency in the vSphere Web Client.

What must be turned on to monitor these metrics?

vSAN Health Service

vSAN Disk Management

vSAN Performance Service

vSphere Distributed Resource Scheduler

30. Which VxRail cluster can tolerate a host failure?

Number of Nodes: 4 Memory Utilization: 80%

Number of Nodes: 5 Memory Utilization: 82%

Number of Nodes: 3 Memory Utilization: 60%

Number of Nodes: 6 Memory Utilization: 85%

Page 4 of 9

31. What is the minimum number of nodes needed for self-healing after a failure with a vSAN storage policy of FTT = 1 and FTM = Mirroring?

32. Which user interface provides remote power control (power on and power off) for VxRail E Series nodes?

VxRail Manager

IPM/BMC

iDRAC

VMware vSphere Web Client

33. A VxRail administrator is concerned that the NDC is a single point of failure on your VxRail nodes.

What can be done to increase redundancy in this scenario?

Spread network traffic across two ports on a PCIe adapter

Spread network traffic across other nodes in the cluster

Spread network traffic across NDC and PCIe adapter ports

Spread network traffic across two NDC

34. A company intends to deploy VxRail for their heavy database workloads on Oracle 11G.

Which type of VxRail nodes should be recommended?

E Series

S Series

P Series

V Series

35. A systems administrator is tasked with upgrading the VxRail software.

Which resource should the administrator use to plan the upgrade?

MyVxRail

ProSupport Services

SolVe Online

OpenManage Enterprise

36. When vSAN deduplication and compression are enabled on an existing VxRail cluster, when does the disk reformatting operation occur?

Immediately

Every 5 minutes

Every 60 minutes

As new data is written

37. In the vSphere Client, where is VxRail Health Monitoring enabled?

Cluster > Monitor > VxRail

Cluster > Configure > VxRail

Menu > Administration

Menu > VxRail

38. A VxRail cluster needs to be moved to a new rack in the datacenter. During this process, the entire cluster will be temporarily shut down.

Which Maintenance Mode option is the best fit?

Protected maintenance mode

Ensure accessibility

Full data migration

No data migration

39. Using the VxRail Plugin, what does VxRail administrator use to compare the current component version state against the expected component version state?

Compliance Reports

Skyline Reports

VxRail VxVerify

Health Monitoring

40. Which VxRail cluster can tolerate a host failure?

Number of Nodes: 3 Compute Utilization: 70%

Number of Nodes: 4 Compute Utilization: 80%

Number of Nodes: 6 Compute Utilization: 85%

Number of Nodes: 12 Compute Utilization: 85%

Page 5 of 9

41. As a VxRail administrator, you must determine how long the rebuild will take after experiencing a hardware failure in the cluster.

When could you locate this information in the vSphere Web Client?

Monitor > vSAN > Physical Disks

Monitor > vSAN > Resyncing Components

Monitor > vSAN > Health

Monitor > vSAN > Virtual Objects

42. Which software component is used to collect real-time log activity for VxRail?

Platform Services Controller

vRealize Log Insight

vCenter

VxRail Manager

43. A VxRail has been configured with the VxRail-deployed vCenter Server option.

Which service VMs can be optionally hosted on the VxRail cluster?

VxRail Manager, vCenter Server, and Platform Services Controller

VxRail Manager and Secure Remote Services/VE

vCenter Server, Platform Services Controller, and Secure Remote Services/VE

vRealize Log Insight and Secure Remote Services/VE

44. When needed, the vSAN might also break large objects into multiple components.

What is the maximum size of a component?

63 GB

127 GB

255 GB

511 GB

45. An administrator wants to perform maintenance on a VxRail system.

What should the VxRail Cluster Health Monitoring status be set to before starting the maintenance activity?

Disabled

Enabled

Suspended

Maintenance mode

46. Which software-defined storage is used by VxRail?

VMware VVols

Dell EMC FlexOS

Dell EMC ScalelO

VMware vSAN

47. A user has three G Series nodes in a VxRail cluster. They are planning to add five additional G Series nodes.

How much additional rack is required to accommodate the new nodes?

10U

48. An environment has two VxRail clusters with the following hardware configuration:

- Cluster-A is using FTT = 2 and FTM = Erasure Coding

- Cluster-B is using FTT = 2 and FTM = Mirroring

A 100 GB VM is planned to be vMotioned from Cluster-A to Cluster-B.

How much more vSAN capacity is consumed in Cluster-B than in Cluster-A?

0 GB; consumption is unchanged

100 GB

150 GB

167 GB

49. When a RAID-5 storage policy is used, what is the minimum number of VxRail nodes required for vSAN self-healing after a failure?

50. A company has bought VxRail V Series appliances with PCle network cards.

How can the PCle NIC ports be configured in VxRail for data traffic?

Create new Standard or DV switch and add these NICs as uplinks to carry both vMotion and VM network traffic

During initial VxRail setup the NIC ports would be configured automatically to carry VM network traffic

Create new Standard or DV switch and add these NICs as uplinks to carry VM network traffic

During initial VxRail setup the NIC ports would be configured automatically to carry both vMotion and VM network traffic

Page 6 of 9

51. In which environment is it recommended to enable vSAN deduplication and compression?

VDI Using Linked Clones

OLTP Databases

Mixed Workloads

VDI Using Full Clones

52. Which API call asks the VxRail Manager to apply partial modification to a resource?

PATCH

PUT

POST

GET

53. A developer would like to test the VxRail API calls directly in their browser.

What tool should be used for this use case?

VxRail API RESTful API Cookbook

VxRail Onboard API Documentation via Swagger

VxRail API PowerShell package

VxRail API User Guide

54. Which path should be followed to determine how much vSAN capacity is available?

Cluster > Monitor > vSAN > Capacity

Cluster > Monitor > vSAN > Physical Disks

Cluster > Monitor > vSAN > Skyline Health

Cluster > Configure > vSAN > Disk Management

55. What functionality does the iDRAC provide for VxRail nodes?

Network Management

vSAN Configuration

Virtual Machine Management

Firmware updates

56. What is a supported feature when using a vSAN HCI Mesh?

Two-node vSAN clusters

Data in Transit Encryption

vSAN file services

Storage vMotion

57. A VxRail administrator has configured a VxRail stretch cluster with the default distributed virtual switch networks.

Which network is missing?

vSphere vMotion network

Management network

Stretch network

Virtual SAN network

58. An administrator is trying to monitor vSAN backend IOPS, throughput, and latency in the vSphere Client.

What must be turned on to monitor these metrics?

vSAN Disk Management

vSAN Performance Service

vSphere Distributed Resource Scheduler

vSAN Health Service

59. Which VxRail deployment model is recommended in environments that prohibit the use of a corporate DNS server?

Internal vCenter with external DNS

External vCenter with external DNS

External vCenter with internal DNS

Internal vCenter with internal DNS

60. In a VxRail appliance, which task is performed using VxRail Manager?

Create storage pools

Remediate health events

Manage VxRail users and roles

Perform software upgrade

Page 7 of 9

61. What is the recommended vSphere HA response to a Datastore with All Paths Down event for vSAN HCI Mesh client clusters?

Disabled

Power off and restart VMs

Issue events

Shut down and restart VMs

62. Using the VxRail Manager, what information can be located under the node physical view?

Temperature and Health State

Operational Node Status and Appliance ID

Health State and Memory

Location and PSNT

63. What is the fault tolerance method provided by the default storage policy on a newly deployed VxRail all-flash cluster?

RAID-5

RAID-1

RAID-6

RAID-1/10

64. What is the default time, in minutes, of the vSAN object repair timer?

120

1440

65. A VxRail administrator is concerned that the NDC is a single point of failure on your VxRail nodes.

What can be done to increase redundancy in this scenario?

Spread network traffic across two ports on a PCIe adapter

Spread network traffic across other nodes in the cluster

Spread network traffic across NDC and PCIe adapter ports

Spread network traffic across two NDC

66. A construction company is leveraging the benefits of VxRail to support the engineering workloads. The engineers work remotely and utilize graphics intensive workloads. They use computer-aided engineering (CAE) applications for high-end 2D/3D models and digital content creation.

Which VxRail model has been deployed by the company?

D Series

P Series

S Series

V Series

67. Which VxRail Manager view displays the storage IOPS, CPU, memory, and storage usage at the VxRail cluster level?

Health > Physical

health > Logical

Dashboard

Config > System

68. A VxRail administrator has been tasked with configuring static LAG for a VxRail cluster vSAN traffic. The ToR switches have already been configured.

Which VDS port group load balancing option should be configured?

Route based on physical NIC load

Route based on originating virtual port

Route based on IP hash

Route based on source MAC hash

69. Which VMware feature will restart the VM on a different host when the original host fails?

Distributed Resource Scheduler

High Availability

vMotion

Fault Tolerance

70. You are a VxRail system administrator and have received an email alert that a power on the VxRail has occurred. You contact Dell EMC Support and they ask you to run VxRail system diagnostics and send them a log.

Under which tab in VxRail Manager can you find the appropriate Diagnostics button?

System Diagnostic

System Health

Config Health

Config General

Page 8 of 9

71. What are all the actions that can be performed from the Node Information panel of the Physical View of a VxRail E series node?

Add Disk Enable Disk LEDs

Replace Disk Shutdown Host

Add Disk Shutdown Host Enable Chassis LED

Replace Disk Shutdown Host Enable Chassis LED

72. What is the default load balancing policy set for VxRail Port Groups?

Route based on physical NIC load

Route based on source MAC hash

Route based on IP hash

Route based on originating virtual port

73. Which VxRail model series supports only hybrid disks?

S Series

P Series

E Series

G Series

74. A customer requires an All-Flash system, with compression and deduplication, RAID-5/6 capability, and Data at Rest Encryption.

Which vSAN license level should be recommended?

Advanced

Enterprise

Enterprise Plus

Standard

75. Which deployed software component is used to collect real-time log activity for VxRail?

vRealize Log Insight

VxRail Manager

vCenter

Internal tftp

76. The VxRail customer wants to change the hostname and IP address of the VxRail Manager VM.

What should be done to complete this task?

Generate the SolVe procedure and follow the instructions

Refer to the VxRail Administration Guide and follow the instructions

Contact Dell Support for assistance

Refer to VMware documentation and follow the instructions

77. What is the VxRail API endpoint to get the callhome server information?

/rest/vxm/v2/info/callhome

/rest/vxm/v2/callhome/info

/rest/v2/vxm/callhome/info

/rest/vxm/info/v2/callhome

78. An administrator is trying to replace the VxRail Manager Certificate.

Where in the vSphere Client is the option located?

Menu > VxRail > Configuration > Certificates

Cluster > Configure > VxRail > Certificate

Cluster > Configure > VxRail > Hosts

Menu > Administration > Certificates > Certificate Management

79. An administrator wants to get information about a specific host and runs this code:

GET /v1/hosts/{sn}

An API code 404 is returned.

What is the reason for the error code?

The provided {sn} was not valid

There was a server error

The administrator was not authenticated

The API is designed to return all hosts in a cluster

80. What is the order of steps to generate the SolVe procedure to add a capacity drive to a VxRail node?

Page 9 of 9

81. What is a network consideration for VxRail version 4 5.x?

IPv4 Multicast is not required

IPv4 Multicast and IPv6 Multicast are required

IPv4 Multicast is required

IPv6 Multicast is not required

82. A customer has a 24-node standard VxRail cluster.

What is the maximum number of VxRail nodes that can be added to this cluster?

83. The VxRail administrator has been given the task of migrating the current production environment to a VxRail cluster with external block storage. The VMs must remain online during the migration.

Which VMware feature can be used?

Storage vMotion

vMotion

VMware Converter Software

High Availability

84. Which fault tolerance level can be configured across sites in a VxRail Stretched Cluster?

RAID-1

RAID-5

RAID-6

RAID-1/0

85. How much capacity of vSphere Data Protection is provided with a VxRail appliance?

1 TB

8 TB

10 TB

16 TB

86. An administrator has been performing maintenance on a host for the past 60 minutes. The node was put in maintenance mode with ‘ensure accessibility’ selected. Users begin to cite poor performance on the cluster.

What is causing the poor performance?

vSAN is applying a new storage policy

Non-compliant objects have begun to rebuild

Network is trying to reconnect to the missing node

Cached data are being destaged to disk

87. A customer will be managing multiple VxRail clusters using 7.0.130 or greater. There is no budget allocated for additional servers or licenses. The customer prefers to have a single vCenter.

What is the recommended vCenter deployment option?

Internal vCenter Servers with Enhanced Link Mode

Internal vCenter Server with VxRail supplied Standard license

External vCenter Servers with Enhanced Link Mode

External vCenter Server with VxRail supplied Standard license

88. What VxRail node related task can be performed with the VxRail Plugin?

Modify BIOS settings

Replace faulty Power Supply Unit

Replace faulty Network Interface Card

Modify iDRAC network settings

D-VXR-OE-01 Dell VxRail Operate v2 Exam Free Dumps

D-VXR-OE-01 Dell VxRail Operate v2 Exam Free Dumps

Share this post

Related Posts