Microsoft Dynamics 365 Supply Chain Management, Manufacturing MB-320 Free Dumps

1. ) Edit the existing Kanban rule. Set the expiration date to the end of the month. Specify the new Kanban rules as the replacement rule

Does the solution meet the goal?

2. HOTSPOT

A company makes engine parts used in the automotive industry.

They are in the process of retooling an existing manufacturing plant. They are looking to use Dynamics 365 for Finance and Operations to help support the Bill of Materials (BOM) product lifecycle for engineering version control.

You must translate existing production processes into the proper elements. You need to

create BOM lifecycle states to translate existing production processes into the proper elements.

What type of BOM product lifecycle state should you create? To answer, select the appropriate BOM state in the answer area.

3. Note: This question is part of series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

A company implements Dynamics 365 Supply Chain Management and configures the system to support process manufacturing.

The company manufactures pain-relieving lotions. Several of the primary ingredients are delivered at different concentrations depending on the ingredient and vendor. IngredientA is the primary active ingredient in the lotion. IngredientB is used as a compensating ingredient.

You need to ensure that the system is set up to support the manufacturing process.

Solution: Configure the catch weight of IngridientA to allow for the variances of the

concentrations received from the different vendors.

Does the solution meet the goal?

4. DRAG DROP

A configure-to-order company is implementing Dynamics 365 for Finance and Operations. The company is preparing to use the product configuration model functionality to develop the Bill of materials (BOM), routes and valid configuration combinations.

You need to set up the configuration models, constraints, and pricing.

In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order.

5. You are building the Bill of materials (BOM) for a new production item.

The new item has a subcomponent.

Subproduction orders for the subcomponent must be created when estimating production orders.

You need to configure the BOM line to generate subproduction orders.

Which BOM line type should you use?

6. A manufacturing company is implementing production in Dynamics 365 Supply Chain Management.

The production scheduler requires that machines not be scheduled to run concurrently when planning production. The scheduler also must be able to see the scheduling m a graphical view.

You need to configure the system to meet the requirements.

Which three options should you configure? Each answer presents a partial solution. NOTE: Each correct selection is worth one point

7. A company that makes artisan chocolate is implementing Dynamics 365 Supply Chain Management.

To safeguard the quality of its ingredients, the company limits recipe substitutions of its chocolates.

its top-selling chocolate bar must contain 20 percent sugar. The sugar can be Obtained from either cane or beet sugar depending on supply at the time of production.

The system must be able to automatically substitute the appropriate sugar items when generating production orders to meet the quality level of sugar even when the preferred concentration of cane sugar is out of stock.

You need to configure the system.

Which three components must you configure? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

8. HOTSPOT

A company implements Dynamics 365 for Finance and Operations. You must use functionality in the system for group production runs to prevent downtime and excessive cleaning of the machines on the production line.

You need to set up the system.

Which behaviors should you expect? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

9. A company is looking to use Dynamics 365 for Finance and Operations.

The company is in the process of redesigning and retooling an existing manufacturing plant to group similar, cellular operations to improve efficiency and minimize wasted time between operations. They want to locate raw materials close to where they are needed without losing reorder visibility.

You need to set up their environment.

Which kind of production type should you implement?

10. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

A company uses Dynamics 365 Supply Chain Management to manage production configuration.

A product designer creates a remote control toy that can be purchased with different tire sizes.

Sales representatives need to perform product configuration for the custom tire variants when they create a new order.

Solution: Select the custom tire size when filling out each sales order line.

Does the solution meet the goal?

11. Note: This question is part of series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

A company produces and distributes seafood to supermarkets. During the manufacturing process, raw seafood is purchased, cleaned, and packaged into various-sized boxes. Each box may have a different weight.

Product is sold by the box and priced by the pound.

You need to ensure that you can perform transactions at the box level and record the net weight of goods shipped to a customer.

Solution: Set up the product with a sales unit measure of pounds and inventory unit measure of box. Set a standard unit conversation for the product from box to pounds.

Does the solution meet the goal?

12. You are responsible for training the operations staff on production transactions in Dynamics 365 for Finance and Operations. The company uses backflushing for material consumption principles.

You need to train the operators on how to report unintended scrap.

What are two possible ways to achieve this goal? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

13. HOTSPOT

A specialty nutritional supplement manufacturer that produces vitamins uses Dynamics 365 Supply Cham Management. The vitamins are configured as a single product but have multiple sellable variations by volume.

Multiple vendors send bulk raw ingredients to the manufacturer on a quarterly basis.

The vendors own the raw ingredients until the manufacturer receives an order from a distributer for a product. The manufacturer then must own the raw ingredients to be able to process the vendor invoice and provide payments for the required amounts of the raw ingredients.

Any remaining raw ingredients that are unsold and at the end of their shelf life must be removed from storage and shipped back to the vendors.

You need to configure the raw ingredients to meet the requirements.

14. You are the production planner for a manufacturing company.

After running operations scheduling for a production order, the following error message displays:





You need to identify the cause of the error.

Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

15. A company implements manufacturing in Dynamics 365 Supply Chain Management.

The company wants to efficiently produce products comprised of different order types.

You need to select the appropriate production plan.

Which production process should you use for the production run?

16. DRAG DROP

A process manufacturing company is implementing Dynamics 365 for Finance and Operations. The company will use multiple process manufacturing functionalities including by-products.

You need to configure by-product formula allocation methods.

Which methods should you use? To answer, drag the appropriate by-product burden allocation methods to the correct scenarios. Each method may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content

NOTE: Each correct selection is worth one point.

17. Assign shelf life period in days to the items that require expiration dates.

Does the solution meet the goal?

18. DRAG DROP

You are the product manager at a paint manufacturing company. Paint base is produced in 100 gallon batches. The paint base can be packaged in 1 gallon, 5 gallon, and 10 gallon containers.

You want to use consolidated batch orders for the bulk paint base item. You need to set up the items and formulas to allow for consolidated batch orders.

Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

19. DRAG DROP

A company uses Dynamics 365 Supply Cham Management.

Several production orders are in the started status.

An issue with equipment causes a rollback in the production status tor some of the orders.

Some orders must be reset once the equipment is repaired, based on which products were being manufactured.

You need to reset the production orders based on the requirements

Which status should you use for each requirement? To answer, drag the appropriate statuses to the correct requirements. Each status may be used once, more than once, or not at all.

You may need to drag the split bar between panes or scroll to view content.

20. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

A company implements Dynamics 365 for Finance and Operations for their Lean manufacturing environment.

There has been an engineering change to a fixed quantity product that is in production. This change will add an additional processing step as the second step. The existing version must be phased out and replaced by the new version.

You need to ensure that the engineering change takes affect at the end of the month.

Solution:

• Create an activity for the new process step and add it to the existing production flow. Set the expiration date to the end of the month.

• Create a Kanban rule that incorporates the new activity with an effective date of end of the month.

• Edit the existing Kanban rule. Set the expiration date to the end of the month.

• Activate the new production flow.

Does the solution meet the goal?

21. A company implements Dynamics 365 Supply Chain Management.

Due to increased demand and limited space in the work cell area for product L0050, you must subcontract overflow work to another company.

You have the following requirements:

✑ Locate a warehouse at the subcontractor building.

✑ Support picking and shipping activity tracking.

✑ Associate costs of transporting materials between the locations in the cost of the finished product.

You need to modify the production flow.

Which three actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

22. You are using the manufacturing execution module in Dynamics 365 Supply Chain Management.

License plate labels must be printed for products in the Report as finished step.

You need to use the manufacturing execution functionality that meets this requirement.

What should you use?

23. DRAG DROP

A pharmaceutical manufacturer uses Process manufacturing.

You are consolidating planned batch orders for a specific medication. The order must cover two weeks of demand. No other items need to be consolidated.

You need to change the coverage group of the items.

Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

24. DRAG DROP

A manufacturer sends wiring harnesses to a vendor to be soldered to a connector. You have created the subcontracting process in the bill of materials (BOM) and route to account for the items sent to the vendor.

You create separate subcontracting purchase orders to account for the service. You attempt to add the service item to the BOM. The system generates an error.

You need to set up a new item model group for the service item.

Which three actions should you perform? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

25. A company sells large batches of chemicals. Item specifications vary from batch to batch.

You must fulfill multiple orders from the same batch of chemicals. If a single batch cannot be reserved, manual reservation must be used. The system must also make reservations based on the earliest batch receipt date.

You need to set up a new chemical item that automatically uses the new batch reservation logic.

Which three settings should you configure? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

26. Note: This question is part of series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

A manufacturing company has a new speaker that is available with standard and premium carbon fiber options.

For the premium option, speakers are made to order. Customers can choose from seven product attributes at different prices.

You need to create and configure the product and pricing for the new speaker.

Solution: Create a constraint-based product with configurations. Use a price model to calculate the different configurable option costs.

Does the solution meet the goal?

27. HOTSPOT

A company produces homeopathic lotions for pain relief and uses Dynamics 365 for Finance and Operations.

Several components used in the production of the pain-relieving lotion and oils have special government-mandated reporting requirements.

You need to ensure the company can provide the appropriate reporting and tracking for these components.

Which parameters should you use? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

28. A company produces multiple products that require an installation kit that includes 50 components.

The company does not want to include these 50 components in every Bill of materials (BOM). You have a BOM kit that includes all 50 components, but you do not want it to produce a separate production order.

You need to set up the product BOM for the finished good.

What should you do?

29. DRAG DROP

A company plans to implement Dynamics 365 for Finance chain Operations.

You need to determine which manufacturing solutions to use.

Which manufacturing solution should you use? To answer, drag the appropriate setting to the correct drop targets. Each source may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

30. A company produces and distributes seafood to supermarkets. During the manufacturing process, raw seafood is purchased, cleaned, and packaged into various-sized boxes. Each box may have a different weight.

Product is sold by the box and priced by the pound.

You need to ensure that you can perform transactions at the box level and record the net weight of goods shipped to a customer.

Solution: Set up a unit sequence group on the item for both pounds and boxes, then set a standard unit conversion for the product from box to pounds.

Does the solution meet the goal?

31. A company is implementing Dynamics 365 for Finance and Operations in their manufacturing environment.

The manufacturing process uses formulas to direct material consumption on the batch orders.

During production some items in the formula must be consumed automatically from the production area, while some must be picked with their actual consumption reported on a pick list.

You need to determine which setup method is used for formula lines to allow for the desired mixed method picking processes.

What are two possible ways to achieve this goal? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

32. HOTSPOT

A manufacturing company uses license plates for inventory tracking of all materials. Part M92020 is stored with 30 units for each license plate. You create a production order that indicates one unit of part M9202 and release the order for picking. There is no inventory currently available in the production input location.

The warehouse fast-tab setup for part M92020 is shown below.





Use the drop-down menus to select the answer choice that answers each question based on the information presented in the graphic. NOTE: Each correct selection is worth one point.

33. Note: This question is part of series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

A company produces and distributes seafood to supermarkets. During the manufacturing process, raw seafood is purchased, cleaned, and packaged into various-sized boxes. Each box may have a different weight.

Product is sold by the box and priced by the pound.

You need to ensure that you can perform transactions at the box level and record the net weight of goods shipped to a customer.

Solution: Set up the product as a catch weight item with serial control. Set the catch weight unit to box and the inventory unit to pounds.

Does the solution meet the goal?

34. A company has a Dynamics 365 Supply Chain Management implementation. The company plans a promotional sales campaign that targets top customers.

The sales campaign will guarantee that orders are delivered within a specific two-week period.

The system configuration must prioritize a group of similar production orders so they can be scheduled at the same time.

You need to configure the system.

What should you create?

35. CORRECT TEXT

You are a functional consultant for Contoso Entertainment System USA (USMF).

You need to configure the system to ensure that a production release to a warehouse only occurs when the complete list of required components for a product is physically available.

To complete this task, sign in to Dynamics 365 portal.

36. A company produces homeopathic lotions for pain relief and uses Dynamics 365 for Finance and Operations.

You have replaced the vendor of a product’s active ingredient with a new vendor. The new vendor is supplying the ingredient at a higher concentration of 25 percent.

The previous vendor concentration was 15 percent. You are consistently running out of two of the

complimentary ingredients.

You need to update the formula and ingredient settings to allow for better order planning.

What should you do?

37. DRAG DROP

A company plans to account for indirect costs related to materials used to manufacture products.

The items used to manufacture products have surcharge rates that depend on the type of product being used.

You need to set up the costing sheet to include surcharges for specific items.

Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.