IBM QRadar SIEM V7.3.2 Deployment C1000-055 Actual Questions

dumps2021-12-02T06:55:50+08:00

Decide to take IBM QRadar SIEM V7.3.2 Deployment C1000-055 exam? The latest IBM certification C1000-055 actual questions are the best material for you to pass the test easily. There are 60 questions in real IBM C1000-055 exam, and you have 120 minutes to write all the questions. The number of questions required to pass is 37. Free IBM Security Systems C1000-055 actual questions are available below.

Page 1 of 2

1. A deployment professional needs to implement a crossover cable in the high availability (HA) environment.

By doing so, this QRadar deployment isolates what kind of traffic over the crossover connection?

event

flow

query

HA replication

2. A deployment professional needs to check which rules cause events to be dropped on the Console with Pipeline NATIVE_To_MPC messages.

Which script would help with this task?

/opt/qradar/support/findExpensiveCustomProperties.sh

/opt/qradar/support/findExpensiveCustomRules.sh

/opt/qradar/support/astat.sh

/opt/qradar/support/findRules.sh

3. A deployment professional sees the following notification in the IBM QRadar Notification Section. "The Accumulator has fallen behind."

To which performance issues does the notice refer to?

Flow Pipeline

External Storage

Event Pipeline

Global Views

4. High availability (HA) has been configured for an event processor in a deployment. The end user gets the notification "Disk Usage Exceeded max Threshold" for the /store partition on primary host. The retention settings are "Delete data in this bucket: immediately after the retention period has expired".

What will be the behavior of the primary at this stage?

Primary will stop HA disk replication and failover to Secondary

Primary will keep running HA disk replication and failover to Secondary

Primary will stop HA disk replication and No failover to Secondary

Primary will keep running HA disk replication and No failover to Secondary

5. A deployment professional receives instructions to virtualize the currently installed QRadar SIEM All-in-One appliance and to provide requirements. VM specifications must suffice for 4000 EPS.

What are the minimum processor and memory requirements that the deployment professional must use?

128 GB Memory, 16 CPU Cores

256 GB Memory, 32 CPU Cores

32 GB Memory, 16 CPU Cores

8 GB Memory, 4 CPU Cores

6. A deployment professional has been asked to ensure that the system has access to information which can be used by rules to acquire information extracted from a user information source such as Active Directory or LDAP.

Which information repository should the deployment professional store this data in?

Ariel Database

Reference Data

Asset profiles

Docker containers

7. A deployment professional needs to add a new log source using Log File protocol .

Which option is valid for retrieving files?

Syslog

SNMP

TFTP

SFTP

8. A deployment professional needs to install a new QRadar application downloaded from the IBM Security App Exchange.

Which option would the deployment professional select from the QRadar Console GUI under Admin: System Configuration to install the downloaded application?

Customization Management.

Application Management.

Extensions Management.

Content Management.

9. QRadar is configured to periodically update an IP address list from a 3rd party threat intelligence provider using the Threat Intelligence app. The IP address data is used in a CRE rule to create an offense in case a connection attempt toward any IP address on the list is seen.

Which QRadar component stores the collected IP address data?

Building Block

X-Force Threat Feed

Reference Set

Custom Rule

10. A deployment professional needs to create Identity Excluded Searches so as to prevent specific Asset entries from being created. These Asset entries are being created from the events that the QRadar deployment is receiving from different Log Sources.

To add to these Identity Excluded Searches, which type of Saved Searches should be created?

Searches containing last 15 Minutes Data

Searches containing last 24 Hours data

Searches containing last 7 Days data

Real Time Searches

Page 2 of 2

11. A QRadar customer has a custom log source. The deployment professional has already created a custom DSM for the log source and all incoming events are correctly parsed and mapped to a QID. Now, in addition to the currently parsed properties, the customer requires that the information about the last logged in user is recorded in the asset database.

How can the deployment professional fulfill the requirement?

Use the DSM editor to ensure that the Identity Username property is correctly parsed. Create an expression for any available identity property and ensure it is correctly parsed. Also, in the DSM editor enable identity data for the login success event type.

Use the DSM editor to ensure that the Username property is correctly parsed. Create an expression for any available identity property and ensure it is correctly parsed. Also, in the DSM editor, enable the identity data for the login success event type.

Use the DSM editor to create an expression for the Username property so it is correctly parsed. Create an expression for any available identity property and make sure it is correctly parsed. It is automatically applied to all events with low level category "User login success".

Use the DSM editor to create an expression for the Identity Username property and make sure it parses correctly. It is automatically applied to all events with low level category "User login success".

12. A deployment professional configures QRadar auto-update with the automatic install option for all update types where automatic install is available.

Assuming all auto-update installations are successful, which update types will need manual installation?

Major updates, scanner and protocol updates

Configuration updates and WinCollect updates

Application updates and major updates

Application updates, DSM, scanner and protocol updates

13. A deployment professional has been asked to create some Reference Data to be used to provide additional information in the results of Ariel Query Language (AQL) queries. The data will enable a lookup that finds the users's Department based on the username which will be returned by the required AQL function when looked up in the reference data.

Which Reference Data should the deployment professional create for this purpose?

Reference Map

Reference Map of Tables

Reference Set

Reference Map of Sets

14. A deployment professional is working on integrating an unsupported log source. The log source is able to send events in multiple formats. The administrators of the log source ask which event format should be configured.

Which event format should the deployment professional choose to be able to use direct parsing support in QRadar's DSM editor?

BLOB

Regex

LEEF

SAML

15. A deployment professional needs to create a SIEM architecture plan. The deployment professional needs to consider applying a set of security policies (or questions) about the client's network and monitor the policies for changes. It is important also to query all network connections, compare device configurations, filter the network topology, and simulate the possible effects of updating device configurations.

Which component can be added to the deployment to meet this security business objective?

QRadar Incident Forensics

QRadar Risk Manager

QRadar Vulnerability Manager

QRadar Network Insights

16. A customer needs to increase the storage space that is available to an Event Processor and be able to speed up historical searches.

Which solution should the deployment professional recommend?

Connect a Data Node to the Event Processor

Add an Event Collector to the Event Processor

Connect additional External Storage to the Event Processor

Expand the storage space on the Event Processor using LVM

17. What are anomaly detection rules used for?

Detecting volume changes that occur in regular patterns.

Detecting event traffic.

Detecting an activity that is greater or less than a specified range.

Detecting when unusual traffic patterns occur in the network.

18. A company has a large network with multiple segments. The manufacturing area network and the research and development (R&D) area network are separated from the product area network, and the customer does not want to run scanners through firewalls. A deployment professional has been tasked with proposing a strategy to ensure vulnerability assessment operations cover all company assets.

In addition to a scanner in the production area network, which option should the deployment professional follow?

Deploy a hosted IBM scanner appliance in the manufacturing area network and in the R&D area network.

Deploy a vulnerability manager on a QRadar Managed Host in the manufacturing area network and in the R&D area network.

Deploy a vulnerability scanner on a QRadar Managed Host in the manufacturing area network and in the R&D area network.

Deploy a vulnerability processor on a QRadar Managed Host in the manufacturing area network and in the R&D area network.

IBM QRadar SIEM V7.3.2 Deployment C1000-055 Actual Questions

IBM QRadar SIEM V7.3.2 Deployment C1000-055 Actual Questions

Share this post

Leave a Reply Cancel reply

Related Posts