CWTS-102 CWNP Wireless Technology Specialist (CWTS) Exam Free Dumps

dumps2025-07-05T09:41:21+08:00

CWTS-102 exam is one for Certified Wireless Technology Specialist (CWTS) certification. Formerly is Certified Wireless Technician (CWT). Learning CWTS-102 exam information is a required step in your preparation. There are 60 multiple choice/single answer questions in real CWTS-102 exam, and you have 90 minutes to answer all the questions. The available language is English. The exam price is $174.99. We provide the latest Certified Wireless Technology Specialist (CWTS) CWTS-102 exam dumps, which can make sure you pass the test easily. Free Certified Wireless Technology Specialist (CWTS) CWTS-102 exam dumps are available below.

Page 1 of 5

1. What process is used after authentication to generate and install encryption keys on 802.11 devices using WPA2?

802.1X port-based authentication

Passphrase to PSK mapping algorithm

EAP authentication

4-way handshake

2. What are some common causes of connectivity problems in wireless networks?

Configuration errors

Low data rates

Driver issues

Feature incompatibility

3. You are receiving reports from several users that their clients connect with very low data rates. All reports are confined to a particular area in the facility and the users report that the problem does not occur with the same devices in other areas.

What is most likely problem in that area?

High SNR

Improper AP security configuration

Poor signal strength

Improper client security configuration

4. Which device type is commonly used for capturing video footage wirelessly?

Laptops

Tablets

Mobile phones

Specialty devices (video cameras)

5. What is one possible cause of poor signal strength in a wireless network?

Interference

Supplicant issues

Configuration errors

Low data rates

6. What is the term used to describe the interference caused when multiple devices use the same channel in RF communication?

Antenna pattern charts

Co-Channel Interference (CCI)

Passive antenna gain

Antenna mounting kits

7. How can RF signal propagation be affected by obstacles or materials?

Gain and loss

Reflection

Refraction

Scattering

8. When clients are using unacceptably low data rates for WLAN transmissions, what metric is too low?

SNR

Interference strength

Noise floor strength

MTU size

9. Which location process in 802.11 wireless networks involves listening for beacon frames broadcasted by nearby access points?

Passive scanning

Active scanning

Association

4-way handshake

10. What is the term used to describe the interference caused by multiple access points using the same channel in close proximity?

Configuration errors

Interference

Co-channel interference (CCI)

Feature incompatibility

Page 2 of 5

11. Which operating system is commonly used on Apple devices such as iPhones and iPads?

Windows

macOS

Chrome OS

iOS

12. What metric is most commonly used at the receiver to report the signal strength?

Select one:

dBm

Watt

Milliwatt

Nanowatt

13. Which security problem can occur if the network key used for encryption in a wireless network is incorrect?

Configuration errors

Incorrect passphrases

Incompatible EAP methods

Incorrect network keys

14. Which configuration option allows control over the transmit power of an 802.11 AP?

PHY and frequency band support

Single-band vs. dual-band

Output power control

Operational modes

15. Which factor can negatively impact wireless signal strength and cause connectivity issues?

Configuration errors

Interference

Supplicant issues

Co-channel interference (CCI)

16. What does output power control allow you to do in the configuration of an AP?

Increase or reduce the output power

Change the channel

Implement Dynamic Frequency Selection (DFS)

Increase or reduce the antenna gain

17. Which factor can contribute to low data rates in a wireless network?

Interference

Co-channel interference (CCI)

Configuration errors

Low signal strength

18. What is one possible cause of security problems in a wireless network if the EAP method used by the client is not supported by the access point?

Configuration errors

Incorrect passphrases

Incompatible EAP methods

Incorrect network keys

19. Which operating system is commonly used on laptops and desktops?

Windows

macOS

Chrome OS

Linux

20. Which type of issue can occur if the wireless network drivers are outdated or incompatible?

Configuration errors

Interference

Poor signal strength

Driver issues

Page 3 of 5

21. What does RSSI stand for in the context of RF signals?

Received signal strength indicator

Radio signal scattering index

Relative signal strength indicator

Reflection and scattering intensity

22. Which configuration option allows an 802.11 AP to receive power through an Ethernet connection?

PHY and frequency band support

Single-band vs. dual-band

Output power control

PoE support

23. How many non-overlapping channels are available in regulatory domains in the 2.4 GHz frequency band?

Select one:

24. What EAP method is supported on most operating systems without additional installation requirements?

EAP-GTC

EAP-FAST

EAP-TLS

LEAP

25. A device is a 3x2:2 device.

How many spatial streams can it receive?

26. What is the term used to describe the minimum signal strength required by a device to successfully receive wireless communication?

Supported channels

Channel widths

Transmit power

Receive sensitivity

27. When configuring an AP to use a RADIUS server, in addition to the RADIUS server IP address and port used, what will always be required?

Administrator password

Super user password

Encryption key

Shared secret

28. Which type of mount is commonly used for installing an 802.11 AP on a pole or mast?

Wall mount

Pole/mast mount

Ceiling mount

Floor mount

29. When three APs are placed within ten meters of each other and use the same channel, but are not Single Channel Architecture (SCA) APs, what problem will be exaggerated?

Non-Wi-Fi interference

Antenna misalignment

ACI

CCI

30. Which location process in 802.11 wireless networks involves actively sending probe requests to discover available networks?

Passive scanning

Active scanning

Authentication

Association

Page 4 of 5

31. What are the regulatory constraints that may limit the selection of specific channels for RF communication?

Available channels by protocol

Best practices for channel selection

Co-Channel Interference (CCI) and Co-Channel Contention (CCC)

Regulatory constraints on channel selection

32. What are some common causes of performance problems in wireless networks?

Configuration errors

Interference

Low data rates

Co-channel interference (CCI)

33. If the AP’s time is not automatically configured to match the rest of the network, what infrastructure service may be unreachable by the AP?

DNS

DHCP

NTP

FTP

34. What RF feature determines the range and coverage of a wireless device?

Supported channels

Channel widths

Transmit power

Receive sensitivity

35. What kind of antenna chart shows the radiation pattern of an antenna from the side view of that antenna?

Top-down

Azimuth

Horizontal

Elevation

36. What does dual-band refer to in the context of an 802.11 AP?

Support for two simultaneous wireless connections

Support for two different frequency bands

Ability to operate in two operational modes

Multiple-SSID support for guest access

37. Which of the following is a measurement unit commonly used to assess RF signal strength?

Wireless scanner tools

Client signal strength reports

RSSI vs. dBm

Output power vs. received signal strength

38. You are using 802.1X/EAP for enterprise authentication for your WLAN. Where must the RADIUS server’s IP address be configured to enable this for the WLAN?

Wireless desktops

Subnet router

Wireless laptops

39. What is the term used to describe the interference caused when multiple devices compete for the same channel in RF communication?

Antenna cables and connectors

Co-Channel Interference (CCI)

Co-Channel Contention (CCC)

Antenna pattern charts

40. Which process in the WLAN connection sequence involves verifying the identity of the client device?

Authentication

Association

802.1X/EAP authentication

4-way handshake

Page 5 of 5

41. What type of interference occurs when multiple devices contend for the same channel in a wireless network?

Configuration errors

Interference

Low data rates

Co-channel contention (CCC)

42. What is the maximum power that an 802.3at Power over Ethernet (PoE) injector can output in the Ethernet interface?

30 W

15.4 W

12.95 W

25.5 W

CWTS-102 CWNP Wireless Technology Specialist (CWTS) Exam Free Dumps

CWTS-102 CWNP Wireless Technology Specialist (CWTS) Exam Free Dumps

Share this post

Leave a Reply Cancel reply

Related Posts

CWNP Wireless Security Professional CWSP-207 Exam Free Dumps

Certified Wireless Network Administrator CWNA-109 Exam Dumps

Certified Wireless Network Administrator CWNA-108 Dumps Questions

CWT-101 Exam Online Dumps – Certified Wireless Technician

Free Certified Wireless Design Professional CWDP-304 Exam Dumps

CWDP-305 Certified Wireless Design Professional Exam Free Dumps

Certified Wireless Analysis Professional CWAP-404 Exam Dumps