FCSS_NST_SE-7.6 FCSS - Network Security 7.6 Support Engineer Exam Free Dumps - Free Latest Dumps for IT Certification Exams

FCSS_NST_SE-7.6 FCSS – Network Security 7.6 Support Engineer Exam Free Dumps

dumps2025-08-28T09:54:29+08:00

FCSS_NST_SE-7.6 FCSS – Network Security 7.6 Support Engineer exam is the new upgrade test of FCSS_NST_SE-7.4, which will be retired on October 31, 2025. Learning FCSS_NST_SE-7.6 exam information is a required step. There are 40 multiple-choice questions in real Fortinet FCSS_NST_SE-7.6 exam, and you have 75 minutes to answer all the questions. The available language is English. We provide the latest FCSS – Network Security 7.6 Support Engineer FCSS_NST_SE-7.6 exam dumps, which can ensure you pass the test easily. Free FCSS – Network Security 7.6 Support Engineer FCSS_NST_SE-7.6 exam dumps are available below.

Page 1 of 2

1. Consider the scenario where the server name indication (SNI) does not match either the common name (CN) or any of the subject alternative names (SAN) in the server certificate.

Which action will FortiGate take when using the default settings for SSL certificate inspection?

FortiGate uses the SNI from the user's web browser.

FortiGate closes the connection because this represents an invalid SSL/TLS configuration.

FortiGate uses the first entry listed in the SAN field in the server certificate.

FortiGate uses the CN information from the Subject field in the server certificate.

2. Exhibit.

Refer to the exhibit, which contains partial output from an IKE real-time debug.

Which two statements about this debug output are correct? (Choose two.)

Perfect Forward Secrecy (PFS) is enabled in the configuration.

The local gateway IP address is 10.0.0.1.

It shows a phase 2 negotiation.

The initiator provided remote as its IPsec peer I

3. Exhibit.

Refer to the exhibit, which shows the output of a diagnose command.

What can you conclude about the debug output in this scenario?

The first server provided to FortiGate when it performed a DNS query looking for a list of rating servers, was 121.111.236.179.

There is a natural correlation between the value in the FortiGuard-requests field and the value in the Weight field.

FortiGate used 64.26.151.37 as the initial server to validate its contract.

Servers with a negative TZ value are less preferred for rating requests.

4. Refer to the exhibit, which shows the output of a policy route table entry.

Which type of policy route does the output show?

An ISDB route

A regular policy route

A regular policy route, which is associated with an active static route in the FIB

An SD-WAN rule

5. Exhibit.

Refer to the exhibit, which shows a FortiGate configuration.

An administrator is troubleshooting a web filter issue on FortiGate. The administrator has configured a web filter profile and applied it to a policy; however the web filter is not inspecting any traffic that is passing through the policy.

What must the administrator do to fix the issue?

Disable webfilter-force-off.

Increase webfilter-timeout.

Enable fortiguard-anycast.

Change protocol to TC

6. Which statement about IKEv2 is true?

Both IKEv1 and IKEv2 share the feature of asymmetric authentication.

IKEv1 and IKEv2 have enough of the header format in common that both versions can run over the same UDP port.

IKEv1 and IKEv2 use same TCP port but run on different UDP ports.

IKEv1 and IKEv2 share the concept of phase1 and phase2.

7. Exhibit 1.

Exhibit 2.

Refer to the exhibits, which show the configuration on FortiGate and partial internet session information from a user on the internal network.

An administrator would like to lest session failover between the two service provider connections.

Which two changes must the administrator make to force this existing session to immediately start using the other interface? (Choose two.)

Change the priority of the port! static route to 11.

Change the priority of the port2 static route to 5.

Configure unset snat-route-change to return it to the default setting.

Configure set snat-route-change enable.

8. Refer to the exhibit, which shows the output of a debug command.

Which two statements about the output are true? (Choose two.)

The interlace is part of the OSPF backbone area.

There are a total of five OSPF routers attached to the vorz4 network segment

One of the neighbors has a router ID of 0.0.0.4.

In the network connected to port4, two OSPF routers are down.

9. Refer to the exhibit.

Which three pieces of information does the diagnose sys top command provide? (Choose three.)

The miglogd daemon is running on CPU core ID 0.

The diagnose sys top command has been running for 18 minutes.

The miglogd daemon would be on top of the list, if the administrator pressed m on the keyboard.

The cmdbsvr process is occupying 2.4% of the total user memory space.

If the neweli daemon continues to be in the R state, it will need to be manually restarted.

10. Refer to the exhibit, which shows the output o! the BGP database.

Which two statements are correct? (Choose two.)

The advertised prefix of 10.20.30.0'24 was configured using the network command.

The first four prefixes are being advertised using a legacy route advertisement.

The advertised prefix of 10.20.30.0'24 is being advertised through the redistribution of another routing protocol.

The output shows all prefixes advertised by all neighbors as well as the local router.

Page 2 of 2

11. In which two slates is a given session categorized as ephemeral? (Choose two.)

A UDP session with only one packet received

A UOP session with packets sent and received

A TCP session waiting for the SYN ACK

A TCP session waiting for FIN ACK

12. Refer to the exhibit, which shows the output of get router info bgp summary.

Which two statements are true? (Choose two.)

The local ForliGate has received one prefix from BGP neighbor 100.64.1.254.

The TCP connection with BGP neighbor 100.64.2.254 was successful.

The local FortiGate has received 18 packets from a BGP neighbor.

The local FortiGate is still calculating the prefixes received from BGP neighbor 100.64.2.264

13. Which exchange lakes care of DoS protection in IKEv2?

Create_CHILD_SA

IKE_Auth

IKE_Req_INIT

IKE_SA_NIT

14. Refer to the exhibit, which shows a partial output of the fssod daemon real-time debug command.

What two conclusions can you draw Itom the output? (Choose two.)

The workstation with IP 10.124.2.90 will be polled frequently using TCP port 445 to see if the user is still logged on.

The logon event can be seen on the collector agent installed on Windows.

FSSO is using DC agent mode to detect logon events.

FSSO is using agentless polling mode to detect logon events.

15. An administrator wants to capture encrypted phase 2 traffic between two FotiGate devices using the built-in sniffer.

If the administrator knows that there Is no NAT device located between both FortiGate devices, which command should the administrator run?

diagnose sniffer packet any 'udp port 500'

diagnose sniffer packet any 'lp proto 50'

diagnose sniffer packet any 'udp port 4500'

diagnose sniffer packet any 'ah'

16. Refer to the exhibits.

An administrator Is expecting to receive advertised route 8.8.8.8/32 from FGT-A. On FGT-B, they confirm that the route is being advertised and received, however, the route is not being injected into the routing table.

What is the most likely cause of this issue?

A batter route to the 8.8.8.8/32 network exists in the routing table.

FGT-B is configured with a prefix list denying the 8.8.8.8/32 network to be injected into the routing table.

The administrator has misconfigured redistribution of routes on FGT-

FGT-8 is configured with a distribution list denying the 8.8.8.8/32 network to be injected into the routing table.

17. Refer to the exhibit, which shows the output of a BGP debug command.

What can you conclude about the router in this scenario?

The router 100.64.3.1 needs to update the local AS number in its BGP configuration in order to bring up the 8GP session with the local router.

An inbound route-map on local router is blocking the prefixes from neighbor 100.64.3.1.

All of the neighbors displayed are part of a single BGP configuration on the local router with the neighbor-range set to a value of 4.

The BGP session with peer 10.127.0.75 is up.

18. Which two statements about an auxiliary session ate true? (Choose two.)

With the auxiliary session selling disabled, only auxiliary sessions are offloaded.

With the auxiliary session setting enabled. ECMP traffic is accelerated to the NP6 processor.

With the auxiliary session setting enabled. Iwo sessions are created in case of routing change.

With the auxiliary session setting disabled, for each traffic path. FortiGate uses the same auxiliary session.

19. Exhibit.

Refer to the exhibit, which contains a screenshot of some phase 1 settings.

The VPN is not up. To diagnose the issue, the administrator enters the following CLI commands on an SSH session on FortiGate:

However, the IKE real-time debug does not show any output.

Why?

The administrator must also run the command diagnose debug enable.

The debug shows only error messages. If there is no output, then the phase 1 and phase 2 configurations match.

The log-filter setting is incorrect. The VPN traffic does not match this filter.

Replace diagnose debug application ike -1 with diagnose debug application ipsec -1.

20. Which two statements are true regarding heartbeat messages sent from an FSSO collector agent to FortiGate? (Choose two.)

The heartbeat messages can be seen using the command diagnose debug authd fsso list.

The heartbeat messages can be seen in the collector agent logs.

The heartbeat messages can be seen on FortiGate using the real-lime FSSO debug.

The heartbeat messages must be manually enabled on FortiGate.

FCSS_NST_SE-7.6 FCSS – Network Security 7.6 Support Engineer Exam Free Dumps

FCSS_NST_SE-7.6 FCSS – Network Security 7.6 Support Engineer Exam Free Dumps

Share this post

Leave a Reply Cancel reply

Related Posts