HPE6-A89 HPE Networking Comware Exam Free Dumps

dumps2025-10-10T09:41:00+08:00

To earn HPE Advanced Product Certified – Comware certification, you need to take and pass HPE6-A89 exam. Learning HPE6-A89 exam information is a required step. There are 50 questions in real HPE6-A89 exam, and you have 1 hour 30 minutes to answer all the questions. The required passing score is 70%. The available languages are English, Japanese, Latin American Spanish. We provide the latest HPE Networking Comware HPE6-A89 exam dumps, which can help you pass the test easily. Free HPE Networking Comware HPE6-A89 exam dumps are available below.

Page 1 of 3

1. Scenario: You are configuring port GigabitEthernet1/0/10 on a Comware switch. The port should belong to VLAN 20 and should not tag traffic.

Which two commands must you use?

port link-type trunk

port link-type access

port default vlan 20

vlan permit 20

2. Which command enables DNS lookup on a Comware device?

dns resolve enable

ip domain-lookup

enable dns lookup

dns client enable

3. Which type of ACL in Comware matches only on the source IP address?

Advanced ACL

Standard ACL

Layer 3/4 ACL

VLAN ACL

4. Which mode must an interface be in to carry traffic for multiple VLANs?

Trunk

Hybrid

Access

Monitor

5. What is the primary goal of implementing QoS on a network switch?

Improve routing speed

Enhance VLAN segmentation

Prioritize critical traffic over less important traffic

Encrypt sensitive traffic

6. What is the function of the PVID on a trunk port?

Assigns default IP address

Determines the VLAN for untagged frames

Blocks tagged VLANs

Enables STP on the VLAN

7. Which of the following is true about PIM Dense Mode (PIM-DM)?

It requires an RP to forward multicast traffic

It sends traffic only to known receivers

It floods multicast traffic and prunes where unnecessary

It is deprecated in Comware

8. Scenario: A network has three interconnected Comware switches. The administrator notices redundant links but wants to prevent loops while still maintaining redundancy.

Which feature should be enabled to achieve this?

Port Aggregation

Loopback Detection

Spanning Tree Protocol

Broadcast Suppression

9. Which of the following statements is true about External BGP (eBGP) neighbors?

They must reside in the same autonomous system

They use UDP for updates

They typically have a default TTL of 1 hop

They require GRE tunnels to exchange routes

10. Which Comware feature helps prevent unauthorized brute-force login attempts?

Port security

Blacklist policy

Interface ACLs

Page 2 of 3

11. Which command in Comware enables a BGP process for a router in AS 65001?

router bgp enable 65001

bgp instance 65001

bgp 65001

bgp enable as 65001

12. Scenario: You are troubleshooting a network where users are experiencing delays during topology changes. The switches are using default STP settings.

What can be done to reduce convergence time?

Use MSTP instead of STP

Disable STP

Lower bridge priority of all switches

Enable loop guard

13. Which command copies the current configuration to the startup configuration file?

write memory

store config

copy running-config startup-config

save

14. Which prompt indicates that a user is in the system view of a Comware device?

[Device]

(Device)#

Device(config)#

15. Scenario: You have enabled multicast routing on your Comware switch and configured PIM-SM on VLAN interfaces. However, clients are not receiving multicast streams.

Which step should you take next?

Assign a static RP

Configure OSPF on all VLANs

Disable IGMP snooping

Increase PIM hello interval

16. Scenario: You want to restrict multicast traffic to only receivers that explicitly request it, and the application supports Source-Specific Multicast (SSM).

Which configuration should you ensure is enabled?

IGMPv2 and PIM-SM

IGMPv3 and SSM mapping

PIM-DM with IGMP snooping

IGMP snooping and VLAN pruning

17. Which command enables IP routing on a Comware switch?

ip enable

ip routing

ip route enable

routing

18. Scenario: An engineer upgrades the system image on a Comware switch and wants to ensure the device boots with the new version after a reboot.

Which command should the engineer use to accomplish this?

boot-loader file flash:/new-image.bin

save

display startup

boot system new-image.bin

19. Scenario: Your network has two upstream providers using eBGP. You prefer to use the provider connected to Router A for outbound traffic.

What’s the best way to influence outbound path selection in BGP?

Use the MED attribute

Modify the AS-PATH

Set LOCAL_PREF higher on routes from Router A

Apply route-map filtering

20. Which command verifies the current IRF topology and role of each switch?

display irf

show stacking status

display irf topology

show irf-members

Page 3 of 3

21. Scenario: Two Comware switches are part of an IRF fabric. The master switch fails unexpectedly.

What happens next in the IRF topology?

The fabric shuts down

The backup switch takes over as the new master

All VLANs are disabled until recovery

Manual intervention is required to restore operations

22. Scenario: An enterprise is deploying OSPF in a multi-area design. One department is assigned to Area 10, and another to Area 20. Both connect to a central Area 0. They want to restrict Type 5 LSAs from entering Area 20.

Which area type should you configure for Area 20?

NSSA

Stub

Totally Stubby

Backbone

23. Which command saves the current configuration to the startup configuration file in Comware OS?

write memory

copy running-config startup-config

save

commit

24. Which command would you use to apply a QoS policy to an interface?

apply qos-profile

traffic-policy apply

qos enable interface

class-map bind

25. Scenario: You’re configuring a Comware switch to act as a DHCP client on interface Vlan-interface 100 to receive an IP address automatically from a DHCP server.

Which command must be applied within the VLAN interface configuration?

ip address dhcp

ip address dhcp-allocate

ip dhcp enable

address-mode dynamic

26. Which of the following BGP attributes is mandatory in every route advertisement?

LOCAL_PREF

ORIGIN

MED

NEXT_HOP

27. Scenario: You have applied ACL 2001 on interface GigabitEthernet1/0/10 in the outbound direction. Users report blocked traffic even though you permitted their subnet.

What is the most likely cause?

ACL is applied inbound instead of outbound

ACL lacks a permit for specific destination IP

ACL does not have a permit ip any any as a final rule

Packet filtering is disabled globally

28. What happens if no ACL rule matches a packet and there is no default permit statement?

The packet is forwarded

The packet is denied

The packet is logged and dropped

The packet is forwarded to the control plane

HPE6-A89 HPE Networking Comware Exam Free Dumps

HPE6-A89 HPE Networking Comware Exam Free Dumps

Share this post

Leave a Reply Cancel reply

Related Posts