HPE7-J02 Advanced HPE Storage Integrator Solutions Written Exam Free Dumps

dumps2025-10-20T10:15:28+08:00

To earn HPE Master ASE – Storage Integrator Solutions certification, you need to take and pass HPE7-J02 exam. Learning HPE7-J02 exam information is a required step. There are 50 questions in real HPE7-J02 exam, and you have 1 hour 30 minutes to answer all the questions. The passing score is 65%. The available languages are English, Japanese, Korean. We provide the latest HPE7-J02 exam dumps, which can make sure you pass the test easily. Free Advanced HPE Storage Integrator Solutions Written Exam HPE7-J02 dumps are available below.

Page 1 of 2

1. Select the scenario where implementing FCoE would be an appropriate solution.

A large enterprise data center with existing Fibre Channel SANs is looking to reduce hardware complexity and costs by consolidating their storage and production networks onto a single infrastructure, while maintaining high performance for mission-critical applications.

A corporation needs to replicate data between data centers in different countries. The data must be synchronized in real-time across a WAN, and the solution must tolerate variable network conditions with minimal impact on performance.

A company with data centers in different states wants to establish a unified SAN infrastructure. The goal is to centralize storage management across all sites, using a single protocol that can efficiently handle high-latency, long-distance connections between data centers.

A tech startup is developing an AI-based application that relies heavily on machine learning models. The team needs a solution that allows them to access and process large datasets in the cloud.

2. Your customer has deployed an HPE Alletra MP B10000 array in its virtualized environment. Data protection follows 3-2-1 best practices, with snapshots on the array, Veeam v12 backups, and storage on an external HPE StoreOnce appliance. Despite this, a ransomware attack made data recovery impossible.

Your customer asks how to enhance data protection with immutability and application consistency.

What is a possible solution using HPE Virtual Lock technology?

Enable Virtual Lock for each backup job inside Veeam v12

Enable Virtual Lock on the VMware datastores in VMware vCenter

Enable Virtual Lock on the HPE StoreOnce Catalyst stores

Enable Virtual Lock on the HPE Alletra storage array

3. You are troubleshooting a storage environment using HPE Alletra Storage MP B10000 in a Peer Persistence configuration. A customer reports high latency when accessing data from applications.

When reviewing the MPIO path status on the host, what should be the path status for connections to the storage array located in the remote data center?

Active Optimized

Passive

Active Non-optimized

Standby

4. You are meeting with a customer who wants to replace their current file storage system. You plan to recommend HPE GreenLake for File Storage. The customer asks whether the solution can provide cross-protocol access to the same data using both NFS and SMB simultaneously.

What is the impact on your design?

A 3rd-party SDS solution such as Qumulo or Scality should be discussed since the HPE GreenLake for File Storage does not support this

HPE GreenLake for File Storage supports native cross-protocol access with NFS, SMB, and S3. You must enable both protocols per share

This is perfectly possible with HPE GreenLake for File Storage by creating two file shares (one for each protocol) and setting up replication

Two different IP pools are required, one for each access protocol. The virtual IP pool address enables cross-protocol functionality

5. Your organization is implementing a new high-performance computing (HPC) cluster to support advanced scientific simul-ations. The cluster will consist of several hundred nodes that require rapid access to shared datasets. The storage is Vast/GL4F.

The application is very sensitive to latency and minimizing CPU overhead during data transfers is critical to achieving the desired performance levels.

Which access protocol should the organization implement to enhance NFS performance by reducing storage latency and increasing I/O operations?

NFS

NFS over RDMA

RoCE

iSER

6. You are migrating your customer's virtualization platform from an old third-party storage array to a newly installed HPE Alletra MP B10000 array. You are using HPE Zerto Move for the migration.

Which statement is correct when using HPE Zerto Move compared to the typical Failover feature?

The Zerto Checkpoint (and RPO) is user-selectable during the move

The source VMs are deleted automatically after the migration

You can keep the source VMs after the migration

The migration results in an RPO and RTO of seconds

7. Refer to the exhibit.

The above image represents an existing Alletra 6000 Peer Persistence configuration.

Which statement could be true in this scenario?

The amount of active (0) paths could reduce the performance of the array.

The performance of the array could be reduced due to the amount of paths active.

The performance of the array could be reduced due to a missing controller.

8. Your customer is a regional bank with branches in two different cities. Each branch is run as an isolated independent business and IT manages their SANs as separate fabrics to limit the scope of any failure. They use B-Series Switches.

The customer has requested a disaster recovery option that will allow replication between the two

sites without merging the fabrics.

Which SAN technology meets the requirements?

FCIP

FC-FC routing

NPIV

Fabric partitioning

9. A junior engineer doing their first assessment makes the comment that all assessments are basically done “entirely by the assessment tool” and all they must do is start the process in the HPE website. You caution them that some assessment tools require a manual email by the engineer to HPE to really start the process.

Which type of assessments require an email?

Backup

SAF

Non-HPE

CloudPhysics

10. Your customer wants to use their HPE Alletra Storage MP B10000 array to store persistent data for Kubernetes-based applications. After deploying the CSI driver using Helm and creating the secret with the command kubectl create -f hpe-backed.yaml, what is the next required step to enable the containerized applications to consume persistent volumes on the Alletra MP array?

Update the Helm repository by using helm repo update to recognize the CSI driver

Create a PersistentVolumeClaim by using kubectl create -f my-pvc.yaml

Create a PersistentVolume by using kubectl create -f pv.yaml

Define a StorageClass by running kubectl create -f storageclass.yaml

Page 2 of 2

11. Refer to the exhibit.

You are sizing an HPE Alletra Storage MP B10000 as shown in the graphic below.

What change must be made to the current storage configuration to achieve maximum IOPS performance?

Additional network cards or HBAs need to be added for more throughput

Additional disks need to be added to the system

No change needed ― the system is already operating at maximum performance

The controller must be upgraded to a 32-core model

12. Which statement is true regarding HPE's SAP HANA solutions?

HPE supplies custom HANA licenses exclusive for HPE appliances.

Customers can reduce licensing costs with Alletra MP Block.

77% of customers prefer SAP HANA solutions on HP

About 40% of HANA infrastructure runs on HP

13. Refer to the exhibit of Zerto Vault architecture.

Which statement about the Zerto Vault architecture is correct?

Data is replicated via encrypted periodic replication between Production and the Replication Target.

Data is replicated via encrypted periodic replication between the Replication Target and the Vault.

The Resilience Automation Server manages port access between Production and the Replication Target.

Immutable snapshots of all Zerto components are taken at the Replication Target and replicated to the Vault.

14. A global financial services company is looking to enhance its disaster recovery (DR) capabilities. They operate VMware workloads across multiple data centers and a mix of AWS and Azure cloud workloads. They need a solution that can replicate data with near-zero recovery point objectives (RPOs) and orchestrate rapid recovery of critical applications in case of a site-wide failure.

Zerto

CommVault

Cohesity

SimpliVity

15. You need to evaluate a customer virtual server environment to size an HPE Block storage solution according to the metrics seen on the system over a period of time. The environment consists of Lenovo servers and Pure Storage as the storage vendor for a Microsoft Hyper-V cluster managed by Microsoft SCVMM.

Which HPE tools can you utilize to gather the usage metrics of this setup?

Import the HPE CloudPhysics.vhdx collector to the Hyper-V cluster to gather the analytics.

Use the HPE InfoSight Primary Storage sizing tool to calculate the competitive performance metrics.

Install the SAFcollector agents into the environment and use SAFanalyze to import the agent output.

Export the Microsoft System Center Virtual Machine Manager database for NinjaProtected analysis.

HPE7-J02 Advanced HPE Storage Integrator Solutions Written Exam Free Dumps

HPE7-J02 Advanced HPE Storage Integrator Solutions Written Exam Free Dumps

Share this post

Leave a Reply Cancel reply

Related Posts