JN0-481 Data Center, Specialist (JNCIS-DC) Exam Free Dumps

dumps2025-07-25T10:20:05+08:00

To earn Juniper JNCIS-DC certification, you need to take and pass JN0-481 exam. Learning Juniper JN0-481 exam information is a required step in your preparation. There are 65 multiple-choice questions in real Juniper JN0-481 exam, and you have 90 minutes to answer all the questions. The available language is English. The pass/fail status is available immediately after taking the test. We provide the latest Juniper certification JN0-481 exam dumps, which can ensure you pass the test easily. Free Data Center, Specialist (JNCIS-DC) JN0-481 exam dumps are available below.

Page 1 of 2

1. When an agent installation is successful, devices are placed into which state using the Juniper Apstra Ul?

IS-MAINT

OOS-READY

OOS-QUARANTINED

IS-ACTIVE

2. Exhibit.

You are working to build an ESI-LAG for a multihomed server. The ESI-LAG is not coming up as multihomed.

Referring to the exhibit, what are two solutions to this problem? (Choose two.)

The gateway IP addresses on both devices must be different.

The LACP system ID on both devices must be the same.

The loopback IP addresses on both devices must be the same.

The ESI ID on both devices must be the same.

3. Which statement is correct about the Juniper Apstra Rendered configuration?

It is built at commit time and stored in a MySQL database.

It is stored in a NoSQL database and incrementally updated.

It is dynamically tendered at commit time.

It is rendered from the graph database and stored locally.

4. Which three statements describe intent-based analytics? (Choose three.)

It indicates when device operating versions require updating.

It is a real-time information processing pipeline.

It is used to establish network performance baselines.

It alerts the network operator when network performance moves away from the baseline.

It collects information from vendor websites.

5. Exhibit.

Referring to the exhibit, how many tack types ate used in the staged blueprint?

six

three

seven

two

6. Which two statements about VXLAN VNIs are correct? (Choose two.)

VNIs can have over 16 million unique values.

VNIs identify a collision domain.

VNIs identify a broadcast domain

VNIs are alphanumeric values.

7. Exhibit.

Referring to the exhibit, how do you display the IPv6 subnets lot all of the listed VXLANs?

IPv6 subnets ate shown when each VXLAN is selected individually.

Select Columns, then select IPv6 Subnet.

Select all VXLANs. and the IPv6 Subnets column will appear

An IPv6 Subnets column is not shown, indicating that no VXLAN has an assigned IPv6 subnet

8. InJuniper Apstra. which three modes are available fordevices? (Choose three.)

Deploy

Active

Stopped

Drain

Ready

9. When editing a device configuration to install some manual changes, which procedure should be followed?

Edit the configuration on the device directly by the CLI; the changes will automatically be adjusted in the Juniper Apstra configuration

Edit the pristine configuration of the device.

Add a persistent change to a device configuration with a configlet.

Delete the device from the Juniper Apstra system, change the configuration, then re-import the device.

10. You are receiving cable, interface, and BGP anomalies from several devices within the data center fabric.

In Juniper Apstra. how would you troubleshoot these types of errors?

In the Ul, go to Time Voyager and revert to the last working version.

In the Ul, access the console to the devices and review the interface states.

In the Ul, go to Devices and confirm that agent connectivity is fine.

In the Ul, verify device connectivity by consulting the cable map.

Page 2 of 2

11. Juniper Apstra has indicated an anomaly with respect to cabling.

What are two ways to remediate the issue? (Choose two.)

Manually edit the cabling map.

Redeploy the errant device.

Set the invalid ports to a disabled state.

Have Apstra autoremediate the cabling map using LLD

12. Exhibit.

Which two statements about ESI values are correct for the server connections to the fabric shown in the exhibit? (Choose two.)

A valid ESI value for Server A is 0x00.00.00.00.00.00.00.00.00.00.

A valid ESI value for Server B is 0x00.20.20.20.20.20.20.20.20.20.

A valid ESI value for Server A is 0x00.10.10.10.10.10.10.10.10.10.

A valid ESI value for Server B is 0x00.00.00.00.00.00.00.00.00.00.

13. What is the purpose of using a routing zone inside Juniper Apstra software?

A routing zone is used to enable L4-L7 inspection inside the fabric.

A routing zone is defined to secure the routing protocols.

A routing zone defined at the Apstra manager level requires firewalls to be deployed.

A routing zone is used to enable the communication between two VNIs within a VR

14. Which two statements are correct about Time Voyager? {Choose two.)

Time Voyager retains all of the blueprint revisions from the last Juniper Apstra backup.

Time Voyager retains the five most recent blueprint commits.

Time Voyager retains the last ten blueprint commits.

Time Voyager retains up to twenty-five saved revisions.

15. You are adding a new switch to Juniper Apstra software. The Managed Devices page shows the "0 OS-Quarantined" status.

What is the proper next step to make the device ready for use in a blueprint?

Acknowledge the device.

Take the device out of maintenance mode.

Install the agent for the device.

Take the device out of drain state.

16. What does EVPN use lo identity which remote leaf device advertised the EVPN route?

a route distinguisher value

a community tag

a route target value

a VRF target value

17. You are installing a Juniper Apstra server in your data center. You have multiple users that will be expected to configure, manage, and carry out operational tasks in your data center. You have decided to implement remote user authentication for the role-based access control of your Apstra server.

In this scenario, which three methods are supported? (Choose three.)

TACACS+

LDAP

RADIUS

SAML

Auth0

18. You want to make a widget appear on the main dashboard in Juniper Apstra. In this scenario, which statement is correct?

When creating the widget, select the Add to Blueprint Dashboard option.

On the blueprint dashboard, click on the Add Widget option.

Widgets automatically appear on the blueprint dashboard.

Set the Default toggle switch to On for the desired widget.

19. In the Juniper Apstra Ul. which two resource types would be created in the Resources menu? (Choose two.)

bridge domain identifier (BDI)

DHCP pools

ASN pools

IP pools

20. You have recently committed a change after creating a new blueprint in Juniper Apstra. In the main dashboard, you see a number of anomalies related to BGR.

What is a likely cause of these anomalies?

You have misconfigured ASNs.

The fabric has not converged yet.

Spine-leaf links are incorrectly set.

A generic system has not been configured.

JN0-481 Data Center, Specialist (JNCIS-DC) Exam Free Dumps

JN0-481 Data Center, Specialist (JNCIS-DC) Exam Free Dumps

Share this post

Related Posts