71301T Avaya Aura Communication Applications Implement Online Test Dumps

dumps2025-04-23T09:15:00+08:00

71301T Avaya Aura Communication Applications Implement Online Test exam is easy to pass. Learning Avaya ASTA 71301T exam information is the first step to study. There are 68 questions in real Avaya 71301T exam, and you have 90 minutes to answer all the questions. The minimum passing score for Avaya 71301T exam is 68% (46 of 68 correct). Our Avaya ASTA 71301T exam dumps can help you pass the 71301T exam and earn Avaya Aura Communication Applications Technical Associate Implement (ASTA-7130) certification. Free Avaya Aura Communication Applications Implement Online Test 71301T exam dumps are available below.

Page 1 of 3

1. After running the Install wizard on Avaya Session Border Controller for Enterprise (SBCE), you added a Public Outside IP address to the B1 interface. You try to ping this IP address from a PC in the same subnet but it falls.

What would you do first to resolve the issue?

Restart Applications.

Set the Default Gateway router IP address, navigate to the Interfaces and Enable the B1 Interface.

Reboot SBC

Navigate to Device Specific Settings > Network Management > Interfaces and Enable the B1 interface.

2. A field engineer runs the Installation Wizard to install the Avaya Session Border Controller for Enterprise (SBCE).

Which statement about the Domain Name Service (DNS) configuration is true?

A DNS address always needs to be configured for both the Primary and Secondary DNS, even if only the DNS is available.

A DNS address does not need to be configured.

A DNS address needs to be configured, even if it is unused and/or unreachable.

A DNS address should not be configured here.

3. When planning the Avaya Session Border Controller for Enterprise (SBCE) for SIP Trunking, what is a good practice to adopt?

Name Interfaces consistently, for example, A1 for Internal network to Call Server and B1 for external to Trunk Server.

Name all internal and external interfaces exactly the same.

Use the same IP address on both, internal and external sides of the network.

Use one Avaya Session Border Controller for Enterprise on the internal and external sides of the network.

4. WebRTC is used for which type of calls?

video calls only

calls originated from internal web browsers only

calls originated from external web browsers only

calls originated from internal and external web browsers

5. The media stream in WebRTC is anchored on which Avaya Aura® component?

Avaya Aura® Media Gateway G430/G450

Avaya Aura® Media Server (AAMS)

No DSP Resources are required

G650 Medpro

6. You are creating the identity certificates that must be installed in the Avaya Session Border Controller for Enterprise (SBCE).

Which statement about installing the certificate files in the SBCE is true?

The cert file and the Key filenames generated by the Certificate Authority must match.

Both the PEM and Key files must be in a zip file.

The SBCE must be rebooted before the files installation.

The cert file and the Key filenames generated by the Certificate Authority must be different.

7. You are setting up the SIP connection between Avaya Aura® Messaging (AAM) and the

Avaya Aura® Core, and the information you have entered for the Far-end connection is:

What should you conclude from all this information?

The connection cannot work because 5061 is not the Well-known port corresponding to TLS by standard.

There will be conflicts in the TLS connections given that 5061 is a well-known port that other Endpoints and Servers use within the same network.

A Security Certificate from the same Certificate Authority as the other Avaya Aura® components, must be installed on the AAM Server to guarantee successful TLS Connections.

The IP address is wrong because its range does not correspond to a valid TLS-compatible IP address.

8. What identifies that the Avaya Breeze™ server is using Identity Certificates that have been signed by Avaya Aura® System Manager (SMGR)?

if the Issuer Name states “O=AVAYA, OU=MGMT, CN= System Manager CA” for the Security Module SIP Identity Certificate

if the replication status is showing ‘Synchronized’ with a green background color

if a successfully installed WebRTC snap-in is used

if the Entity Link between Avaya Aura® Session Manager (SM) and Avaya Breeze™ server is up

9. Which access control method is used by the Avaya Aura® Application Enablement Services (AES) server for administrators?

Single Administrator simple password login

Challenge-Response shared-key method only

System Manager AES Management Menu

Role-Based Access Control

10. Which statement about WebRTC and Media Resources is true?

WebRTC does not use any Media Resources since it only handles Text-Chat sessions.

WebRTC relies on the Avaya Aura® Media Server (AAMS) to convert the WebRTC media stream to a SIP media stream.

WebRTC uses its own embedded proprietary technology to handle and process Media Packets.

WebRTC uses Media Resources from a Hard-Based Media Gateway controlled by Avaya Aura® Communication Manager (CM).

Page 2 of 3

11. When Avaya Aura® Presence Services is implemented, which statement is true about Port Management?

It allows multi-media services over a standard Web-Browser.

It allows independent management capabilities to filter out undesired message to every Avaya Aura® Presence Services user.

It collects statistics about Port-Usage from each Presence-compatible endpoint across the network.

Port 5222 is used for one-X® Endpoints, while Port 5269 is open for connecting with other XMPP 3rd-Party Servers.

12. For an Avaya SIP telephone, working as a Remote Worker via the Avaya Session Border Controller for Enterprise (SBCE), which IP address should be configured in the Server List of the one-X® Communicator?

the SBCE Internal Interface allocated for Mobile Workspace Endpoint

the SBCE External Interface allocated for Mobile Workspace Endpoint

the Internal Avaya Aura® Session Manager SM100 IP Address

the Avaya Aura® Session Manager External Interface allocated for Mobile Workspace Endpoints.

13. Which four kinds of services does the TSAPI standard provide for third-party call control over Avaya Aura® Communication Manager (CM)? (Choose four.)

receiving notifications of events

controlling specific calls or stations

invoking CM features

performing a remote reboot to the CM server

completing the routing of incoming calls

adding new feature buttons to agent sets

14. On Avaya Session Border Controller for Enterprise (SBCE), where do you access the tool that displays SIP messages, in real time, as they pass through the SBCE?

from Avaya Aura® System Manager, navigate to “Session Border Controller for Enterprise > SBCE Administration” menu

from the SBCE EMS Web Console

from the SBCE Server command line via SSH session, using PuTTY

from the traceSIP client installed on a local PC

15. Avaya Aura® Presence Services 7.x is implemented on Avaya Breeze™ (formerly Engagement Development Platform (EDP)).

When looking at Elements > Breeze > Service Management > Services, which status would you expect for a Presence Services snap-in that is ready to support Avaya Aura® Presence Services?

Accepting

Loaded

Installed

Active

16. In Avaya Aura® Messaging (AAM) 6.3, how many Call Answering Ports can one Application Server support?

up to 100 Ports

up to 10 Ports

up to 1000 Ports

up to 10000 Ports

17. Which statement describes Cross-Origin Resource Sharing (CORS)?

It allows for signaling-groups to be used by more than one trunk-group.

It is a W3C specification that allows cross-domain communication from the browser.

It is making DSP resources available regardless of the originating location of a call.

It is a network setup by which an Avaya Aura® Media Server (AAMS) can be used by more than one Avaya Aura® Communications Manager (CM).

18. By default, which Codec does Avaya Aura® Messaging (AAM) support?

726

722

711

729

19. An Avaya Aura® Messaging (AAM) server intended to store Voice Messages in Avaya Message Store Mode, and you are configuring that server for integration with an Avaya Aura® Core.

In Messaging Administration > Server Settings > Server Role/AxC Address, which Server Role must be chosen at the “Roles for this server” field?

Application Only

Storage Only

Storage & Application

AMSM

20. In Avaya Aura® System Manager, how is Avaya Aura® Messaging (AAM) added to the list of Managed Elements?

It is added when you configure the AAM SIP Entity in SMG

It is automatically added during the enrollment process.

It can only be manually added.

It is automatically added using initTM Cf command on the Command Line Interface of AA

Page 3 of 3

21. In Avaya Session Border Controller for Enterprise (SBCE) 7.x, you need to download the 46xxsettings.txt file to a Remote Worker device.

What needs to be configured under DMZ Services > Relay Services?

Application Relay and File Transfer

Reverse Proxy

Application Relay

Application Relay and Reverse Proxy

22. Which configuration must be completed before configuring a TSAPI link on Avaya Aura® Application Enablement Services (AES)?

A CTI link must be configured on Avaya Aura® Communication Manager (CM) first.

A Switch Connection must be configured on Avaya Aura® Application Enablement Services (AES) first.

A signaling-group must be configured on Avaya Aura® Communication Manager (CM) first.

A CTI-user must be configured on Avaya Aura® Application Enablement Services (AES) first.

23. What should be verified before running the initTM Cf command on the Command Line Interface of Avaya Breeze™ platform (formerly known as Engagement Development Platform (EDP))?

Verify that Avaya Breeze™ is configured as a Managed Element in Avaya Aura® System Manager.

Verify that an enrollment password is configured on System Manager and that it has not expired.

Verify that a valid Certificate is installed on the Avaya Breeze™ instance.

Verify that Avaya Breeze™ is licensed.

71301T Avaya Aura Communication Applications Implement Online Test Dumps

71301T Avaya Aura Communication Applications Implement Online Test Dumps

Share this post

Related Posts