72301T Avaya Aura Communication Applications Support Online Test Dumps

dumps2025-04-21T14:38:01+08:00

It is easy for you to take 72301T Avaya Aura Communication Applications Support Online Test now. Here, you can study Avaya 72301T exam information. There are 70 questions in real Avaya ASTA 72301T exam, and you have 90 minutes to answer all the questions. The minimum passing score for Avaya ASTA 72301T exam is 71% (49 of 70 correct). Our new cracked Avaya 72301T exam dumps are the best material for you to pass the test easily. Free Avaya Aura Communication Applications Support Online Test 72301T exam dumps are available below.

Page 1 of 3

1. To validate the initial system status of Breeze with the WebRTC Snap-I, which two components should be checked? (Choose two.)

application

configured certificates

cluster status

licensing status

installation status

2. A technician is trying to access the Avaya Aura ® Media Server (AAMS) after receiving a troubleshooting ticket. After failing to enter the system using different web browsers, the technician realizes the incorrect URL was being used.

Which URL must be used to access the AAMS web page?

https: AAMS FQDN or IP address:8443/emlogin

http: AAMS FQDN or IP address:8443/emlogin

https: AAMS FQDN or IP address:443/emlogin

https: SMGR FQDN or IP address:8443/emlogin

3. A customer reports that Instant Messaging (IM) and Presence are not working for one or two users.

Where would you go to check that IM and Presence have been enabled for the affected users?

Use Avaya Aura® System Manager (SMGR) web GUI to access the Engagement Development Platform > Service Management click on List Presence Users.

Use System Manager (SMGR) web GUI to access User > Users Management > Manage Users > Communication Profile. Ensure that the presence profile is enables and that the right presence server is selected.

Use SSH to Avaya Breeze ™and run “display user xxxx” where xxxx is the station number.

Use Avaya Aura® System Manager (SMGR) web GUI to access User Management > Manage Users > More Actions > Presence Users. Ensure that the presence profile is enables and that the right presence server is selected.

4. When a user is forwarded to Avaya Aura® Messaging (AAM), Avaya Aura® Communication Manager (CM) needs to indicate to AAM who the call was originally destined for, so that the message is left in the correct mailbox.

Which SIP header is used to indicate for whom the call was originally destined, and the reason for being

forwarded to AAM?

B = history info

Request

P-Asserted-Identity

5. Which statement about Network Routing Policies in Avaya Aura® Session Manager (SM) is true?

A dial pattern and routing policy are necessary in SM to call from an H323 device to a Basic/Native SIP device (without an Avaya Aura® Communication Manager profile).

A dial pattern and routing policy are necessary in SM to call from a Basic/Native SIP device (without a CM profile) to an H323 device on Avaya Aura® Communication Manager (CM).

A dial pattern and routing policy are necessary in SM to call from an H323 device to an AST device on the same Avaya Aura® Communication Manager (CM).

A dial pattern and routing policy are necessary in SM to call from an AST device to an H323 device on the same Avaya Aura® Communication Manager (CM).

6. Which two statements describe the 8D Troubleshooting Methodology? (Choose two.)

It is eight steps that guarantee a logical way to isolate an issue.

It is eight steps that ensure a faster time to resolution.

It is eight steps used to guarantee systems are operational after an implementation.

It is eight steps that define how to escalate third-party integration issues.

It is eight steps that guarantee a thorough analysis of a failure, containment actions, full resolution, and prevention for the future.

7. Incoming SIP Trunking calls from Service Provider to Session Manager are failing because Avaya Session Border Controller for Enterprise (SBCE) is not sending a domain name in the TO, FROM and REQUEST headers.

What needs to be changed in SBCE to make this happen?

In SBCE GUI, navigate to Global Profiles > Routing. Edit the Session Manager Routing Profile to link to a URI Group, which has the To, From and Request Headers and Replace Action set to Overwrite with domain name.

In SBCE GUI, navigate to Global Profiles > Server Configuration. Edit the Session Manager server entry to set “Overwrite Domain Name”.

In SBCE GUI, navigate to Global Profiles > Topology Hiding. Edit the SessionManager_TH to change the To, From and Request Headers Replace Action, to Overwrite with domain name.

In SBCE GUI, navigate to Device Specific Settings > Endpoint Flows > Server Flows. Edit the Session Manager flow to change the End Point Policy Group to default-low.

8. You are troubleshooting a TLS link down message between Avaya Aura® Session Manager (SM) and Avaya Session Border Controller for Enterprise (SBCE). Tracing on SM and SBCE reveals a Fatal Error Unknown CA message being sent by SBCE when it receives the Server Identity certificate from SM.

To solve this problem, which two actions need to be completed? (Choose two.)

Install the Certificate Authority certificate that signed SBCE identity certificate into S

Export the SBCE identity certificate, and import it into S

Install the Certificate Authority certificate that signed SM identity certificate into SBC

Add Certificate Authority certificate into the TLS profile Peer Verification List.

9. A Maintenance Engineer logs onto the Command Line Interface (CLI) of Avaya Aura® Messaging (AAM) and issues the vmstat command.

What information will the display present?

statistical information about voicemail boxes

information about the volatile memory

status information about the virtual machine

count of mailbox password violation attempts

10. Considering the message flow to an Avaya Aura® Contact Centre (AACC) Agent Desktop, which protocol is used to communicate between Avaya Aura® Communication Manager (CM) and Avaya Aura® Application Enablement Services (AES)?

WCF

ASAI/TSAPI

DMCC/TSAPI

TR87

Page 2 of 3

11. Which tool has an option to debug the TLS handshake between the server and the client?

SIP Trace Config and SIP Trace Viewer

List trace tac 701

traceSM

List trace tac 701/tls

12. A Network Administrator of a company has been made aware of a problem with the telephone system, and contacts a few colleagues who have dealt with similar problems in the past.

Which Discipline in 8D Methodology describes the action of the Network Administrator?

13. You are trying to connect to the Avaya Session Border Controller (SBC) using the SSH client. After several attempts you cannot do it and realize that it is because you are using the wrong port.

Which port should you use to connect to the SBC using an SSH client?

5022

2222

222

822

14. After Avaya Aura® Messaging (AAM) answers a call Avaya Aura® Communication Manager (CM) will initiate a shuffle of the media path if possible to establish a direct media path between the IP endpoint and AAM.

Which SIP message is sent by Avaya Aura® Communication Manager (CM) to AAM to initiate the shuffle?

Re-Invite

Refer

Info

Cancel

15. A customer reports that they cannot place calls to the Public Network using the SIP Service Provider after a technician had finished fixing an issue in the Session Border Controller (SBC).

Within Avaya SBC, in which three places do you check the configuration of the SIP Trunks? (Choose three.)

PPM Services

Media Interface

Routine Configuration

Signaling Interfaces

Server Configuration

16. Which three statements are true about Avaya Aura® Messaging (AAM)? (Choose three.)

20 Voice Ports are always reserved for retrieving messages.

AAM can run on Avaya-provided hardware that runs Linux® and Avaya Aura® System Platform, or VMware in a virtualized environment.

You can choose to use the Avaya Message Store or Microsoft Exchange Store.

AAM Multi-Server configuration separates Application Servers from Avaya Message Store.

Each message application server allows for up to 100 simultaneous SIP or H323 sessions, with 300 active ports permitted per Voice Mail Domain (VMD).

17. Which three statements about the Avaya Session Border Controller for Enterprise (SBCE) are true? (Choose three.)

Split horizon DNS with FQDN is recommended to allow smartphones to seamlessly register with Avaya Session Border Controller for Enterprise, when out of range of Wi-Fi over the Mobile network, and register direct with Avaya Aura® Session Manager when connected to a corporate Wi-Fi.

You must use HTTPS as opposed to HTTP when web browsing to the Element Management System (EMS).

When ignoring traffic considerations, it is possible to co-reside WebRTC, Remote Worker, and SIP Trunking applications on the same Avaya Session Border Controller for Enterprise (SBCE).

Remote Worker and SIP Trunking can use the same IP addresses for both services.

You can SSH to Avaya Session Border Controller for Enterprise using PuTTY with standard port 22.

18. What are the steps necessary to trace SIP messages going through the Avaya Session Border Controller for Enterprise (SBCE)?

Login to the EMS using a web browser, then access Device specific settings > Troubleshooting > Tracing, and click on Start traceSB

Login to the active Avaya Session Border Controller for Enterprise (SBCE) using SSH port 22, issue the su C root command, and then execute the traceSBC command.

Login to the active Avaya Session Border Controller for Enterprise (SBCE) using SSH port 222, issue the sudo su command, and then execute the traceSBC command.

19. What are two ways to view the ipcs.log file of an Avaya Session Border Controller for Enterprise (SBCE) High Availability (HA) system? (Choose two.)

Login to the EMS using a web browser, then click on the active SBCE under Installed Devices, then click on View System Logs.

20. Callers hear a fast busy when they dial into Avaya Aura® Messaging (AAM) to retrieve their voicemail

messages. After troubleshooting you discover that someone has left trunks in busy-out state on AAM.

How would you restore the trunks to in-service status?

Using AAM web GUI access Administration > Messaging > Diagnostics > Network Connection, and then click on the Release All Trunks button.

SSH to AAM, and execute the release trunks all command.

SSH to AAM, and execute the release trunk command.

Using AAM web GUI access Administration > Messaging > Telephony Diagnostics > Release, type ‘all’ in the Equipment Number field, and then click on the Release button.

Page 3 of 3

21. Which method can be used to verify the Client and TSAPI services have been administered correctly?

The TSAPI test is call initiated from CTI endpoints using SIP telephones.

The TSAPI test is call initialed from within Avaya Aura® Communication Manager (CM) command line using the test TSAPI interface command.

The TSAPI test is call initiated within the TSAPI web interface > TSAPI Monitoring Tool menu.

The TSAPI test is call initiated within the Utilities > Diagnostics > AE ServiceTSAPI Test menu.

22. Which three statements about Avaya Breeze ™ with WebRTC Snap-in are true? (Choose three.)

WebRTC uses a STUN/TURN server to relay WebRTC media from the public network through to the Avaya Aura® Media Server (AAMS).

WebRTC and Presence Services Snap-ins can co-reside on a General Purpose Cluster.

The WebRTC Snap-in will validate the authorization token created and encrypted by the web server.

The web browser uses the “Cluster IP Address” to reach an Avaya Breeze ™ node when making a WebRTC call.

23. Considering the message flow to an Avaya Aura® Contact Center (AACC) agent, which statement about the media path from the incoming caller is true?

It is not anchored on the Avaya Aura® Media Server.

It is anchored on the Avaya Aura® Media Server if using SIP agent.

It is anchored on the Avaya Aura® Media Server until the agent answers the call.

It is anchored on the Avaya Aura® Media Server for the duration of the call.

24. Which two methods can be used to determine the status of the Switch/CTI Link between Avaya Aura® Communication Manager (CM) and Avaya Aura® Application Enablement Services (AES)? (Choose two.)

Observe the AES Alarm Report.

Run an ASAI test on AE

Observe the CM dashboard.

Observe the AES dashboard.

Run the status aesvcs cti-link command on C

25. What is the way to check the version of Presence Services snap-in installed on the Avaya Breeze™ platform?

Using Avaya Aura® System Manager (SMGR) Navigate to Elements > Engagement Development Platform > Server Administration, and read the Version displayed.

Using Avaya Aura® System Manager (SMGR) Navigate to Elements > Engagement Development Platform > Server Management, and read the Version displayed.

Using PuTTY SSH to the Avaya Breeze™ platform, login as cust, then execute the swversion command.

Using PuTTY SSH to the Avaya Breeze™ platform, login as cust, then execute the swversion C Presence Services command.

26. In an Avaya Aura® Presence Services (PS) message flow, which type of message does a Remote Worker first send to PS?

NOTIFY

OPTIONS

27. A customer reports that they cannot place WebRTC calls. You discover there is a problem with communication between Avaya Breeze ™ and the Avaya Aura® Media Server (AAMS).

Where in Avaya Breeze ™ do you set/check the User ID for Restful TLS authentication?

Use the System Manager (SMGR) web GUI to access Breeze > Configuration > Avaya Aura Media Server

Use the System Manager (SMGR) web GUI to access Breeze > Cluster Administration > General > Cluster Attributes

Use the System Manager (SMGR) web GUI to access Breeze > Configuration > Attributes

Use the System Manager (SMGR) web GUI to access Breeze > Server Administration > Dashboard

28. In Avaya Aura® Messaging (AAM), which Command Line Interface command produces the same output as what is shown on the Process Status Results page in the AAM Web GUI?

sysstatus

vmstat

appstat

statapp

29. When a customer calls voicemail to retrieve their messages they hear “Hello, to access your mailbox…”

instead of the users named followed by “please enter your password…”.

After troubleshooting you discover that the Caller ID is not being sent correctly, therefore Avaya Aura®

Messaging (AAM) is not able to identify the correct mailbox associated with the station number calling into

AAM.

How can this problem be fixed?

Change clid-numbering 0 SAT form to send the correct CLI

Using AAM web GUI access Administration > Messaging > Telephone Integration, write a caller ID modification rule to correct the incoming CLID format.

In Session Manager, configure a DigitConversionAdapter with ‘fromto=true’ to update the ‘Form’ header as well as the P-asserted-identity, and link it to the AAM SIP Entity.

Having identified the trunk group from Avaya Aura® Communication Manager (CM) to AMM is public, change public-unknown-numbering 0 SAT form, to send the correct CLI

30. In Avaya Aura® 7 the Avaya Session Border Controller for Enterprise (SBCE) license is installed on a System Manager (SMGR) WebLM server. The EMS points to the WebLM server using a URL.

What is the correct syntax of the URL where 135.xxx.xxx.xxx. is the IP address of the SMGR WebLM server?

https://135.xx.xxx.xx:8443/WebLM/LicenseServer

https://135.xx.xxx.xx:8080/LicenseServer

https://135.xx.xxx.xx:52233/WebLM/LicenseServer

https://135.xx.xxx.xx/WebLM

72301T Avaya Aura Communication Applications Support Online Test Dumps

72301T Avaya Aura Communication Applications Support Online Test Dumps

Share this post

Related Posts