C_IBP_2502 SAP Certified Associate - SAP IBP for Supply Chain Exam Free Dumps - Free Latest Dumps for IT Certification Exams

C_IBP_2502 SAP Certified Associate – SAP IBP for Supply Chain Exam Free Dumps

dumps2025-05-07T11:09:48+08:00

To pass C_IBP_2502 exam, you can get SAP Certified Associate – SAP IBP for Supply Chain certification. Learning SAP C_IBP_2502 exam information is a required step. There are 80 questions, and you have 180 minutes to answer all the questions. The cut score is 73%, The available language is English. To earn the certification, it proves that you have an overall understanding within this consultant profile of the industry solutions, and can implement this skills practically in projects under the guidance of an experienced consultant. Our new cracked C_IBP_2502 exam dumps can make sure you pass the test easily. Free SAP Certified Associate C_IBP_2502 exam dumps are available below.

Page 1 of 3

1. How many different time levels can be selected within one planning view?

Only time levels from the base planning level of selected key figures

All time levels available in the time profile, restricted by global configuration parameter

All time levels available in the time profile

The number of time levels is restricted to four to avoid negative effects on performance

2. You need to define a new logic for a key figure to drive values from the PERPRODCUSTREGION level to the PERPRODCUST level.

Which of the following configuration options are possible for this process? Note: There are 2 correct answers to this question

Splitting the values from detailed to aggregated level by using a copy operator

Splitting the values from aggregated to detailed level using multiplication by the proportions

Splitting the values form aggregated to detailed level, based on the time profile attribute

Splitting the values from aggregated to detailed level, based on a stored split-factor key figure

3. You are setting up planning with lot sizes.

What are some of the properties of lot sizes that you need to beware of? Note: There are 2 correct answers to this question

Lot sizes are applicable for production and handling quantities.

Periodic lot size setting overrides the minimum lot size.

Lot size are time-independent master data settings

Lot size are applicable for production and transportation quantities

4. You need to work in two separate sessions for two different SAP IBP tenants.

What can help you differentiate the appearance of their user interfaces? Note: There are 2 correct answers to this question

Define a different default planning area via the User Preferences

Have a different set to tiles in the Home group of apps

Set a separate theme for the Home page in the Web U

Add the system name and tenant information from the About section to the Home pages

5. Which Master Data Types are used in time-series-based planning within SAP IBP for response and supply? Note: There are 3 correct answers to this question

DS Order fulfilment

Transportation Lane

Customer

Location

Product

6. You are implementing a demand process in SAP IBP for sales and operations, and consider using the standard forecast key figures available in the sample planning area SAPIBP1.

What are the first and last key figures in the logical progression of demand in the S&OP process?

Local Demand Plan first and Combined Final Demand last

Statistical Forecast Qty first and Consensus Demand Plan Qty last

Local Demand Plan first and Consensus Demand Plan Qty last

Statistical Forecast Qty first and Global Demand Plan Qty for SOP last

7. What does ABC/XYZ segmentation allow you to do? Note: There are 2 correct answers to this question

Substitute missing values in case of sporadic demands.

Choose time-independent key figures as segmentation measures

Identify inventory items that quire closer attentions

Use forecasting algorithms that are specific to seasonal demands of SKUs in the segment "B"

8. Which processes are running in sampl to this question.

Supply and Allocation Planning

Inventory Optimization

Response Planning

Demand Sensing

Sales and Operation planning

9. Which constraints are taken into account by the Time-Series-Based Supply Planning Heuristic (Infinite)? Note: There are 3 correct answers to this question

Adjusted transportation receipts

Aggregated constraints

Maximum lot size

Transportation lead time

Minimum lot size

10. You are reviewing the master data types that are often used for supply and inventory planning.

Which master data types are compound master data types? Note: There are 2 correct answers to this question

SOURCEPRODUCTION

SOURCECUSTOMER

SOURCELOCATION

SOURCECUSTGROUP

Page 2 of 3

11. Which options can be used to reduce the runtimes of a time-series optimizer run? Note: There are 3 correct answers to this question.

Keep the number of fairshare segments small

Split into multiple planning areas to support weekly vs. daily planning needs.

Use non-overlapping networks by using Subnetworks ID maintained at Location-Products to reduce the size of the problem

Eliminate the usage of telescopic time buckets

Increase the use of incremental lot size beyond the frozen horizon.

12. What is an example of a commonly used time-independent key figure?

A Special key figure marked as an aggregate key figure (aggregate constraint)

A unit of measure key figure, such as UoM Conversion Factor

Any attribute as a key figure

A currency conversion key figure, such as Exchange Rate

13. What is an example of a commonly used time-independent key figure?

A Special key figure marked as an aggregate key figure (aggregate constraint)

A unit of measure key figure, such as UoM Conversion Factor

Any attribute as a key figure

A currency conversion key figure, such as Exchange Rate

14. You are starting a new implementation project for SAP IBP and are considering the possible system architecture.

What are the possible approaches for setting up the system landscape? Note: There are 2correct answers to this question

Setup the two-tier landscape and have the configuration for development system regularly ― updated from the production system

Create additional planning areas in the test system to support training needs.

Create additional test planning areas in the production system to support cutover needs

Set up a three-tier landscape using transport, starting from the development system to test and ― production

15. What are some of the capabilities of the Planner Workspaces app? Note: There are 2 correct answers to this question.

It supports simulating the effect of the changes

It supports favourites created in SAP IBP, add-in for Microsoft Excel

It supports embedding analytic stories as a workspace component

It supports sharing with other users or user groups.

16. Which of the following conditions are relevant for subtotals in the planning view? Note: There are 2 correct answers to this question.

The total value can be added before or after the selected attribute

The Total number of the attribute that can use subtotal in the planning view can be restricted

The values of the attribute-based total at the highest attribute level in the planning level can be ― changed

Only attribute-based totals can be added to the planning view.

17. Manage Analytics Stories introduces advanced visualization features within SAP Integrated Business Planning for Supply Chain.

What are some of the main capabilities of the stories? Note: There are 3 correct answers to this question.

Links to the external URLs can be embedded in the story.

The story is structured around one responsive page

Specific chart and table filters can be applied within the story

Stories must be re-created in each SAP IBP environment.

18. What option is available for the key figure that is enabled for fixing?

Fixing is possible for key figures with negative values

Fixing is possible for a part of key figure value on a certain planning level

You can change a fixed key figure only with administrative rights

Fixing is possible for certain period, Including all child values in the hierarchy

19. You are adding a value-based filter to a planning view.

Which of the following conditions apply? Note: There are 2 correct answers to this question.

These filters can be used together with attributes totals in the same planning view

The alerts dashboard is not available if a value-based filter is set for the open planning view

You can add (or delete) planning objects to a planning view after these filters are applied

You can only apply one value-based filter per planning view.

20. You need to integrate data from SAP S/4HANA and legacy ERP to SAP IBP.

What are the integration tools that you can use with such a setup for data transfer? Note: There are 2 correct answers to this question.

SAP Cloud Integration for data services

SAP Smart data Integration

Core Interface

Real-time Integration

Page 3 of 3

21. You create a planning filter using an SAP IBP Fiori app.

Which of the following objects can it be applied to? Note: There are 2 correct answers to this question.

Planning view template in the SAP IBP, add-in for Microsoft Excel

Jobs in the Application jobs app

Compare function in the Planning Areas app

Supply chain graph in Supply Chain Network app

22. You are modeling co-products in SAP Integrated Business Planning for Supply Chain.

What are some of the properties ofco-production you need to be aware of? Note: There are 2 correct answers to this question

The number of co-products that can be defined in the supply model is unlimited.

The output coefficient is time-dependent and should be modeled as a time series

The relationship between main product and co-product is specified in the production source of supply.

Co-production can be modelled only by supply optimizer and finite heuristics

23. Which Supply Planning processes are part of the tactical Planning level within a Planning Hierarchy? Note: There are 2 correct answers to this question.

Order Prioritization

Stock Replenishment

Inventory Build and Reduction

Balancing Supply and Demand

24. You are evaluating criteria for choosing the solver to support planning for a complex supply.

What are some of the points that should be reviewed? Note: There are 2 correct answers to this question.

Finite heuristics works with demand prioritization

Push and Pull production models are used by the optimizer

Prioritization of demand elements one by one is achieved by unconstrained heuristics

Planning results can be generated faster by the optimizer.

C_IBP_2502 SAP Certified Associate – SAP IBP for Supply Chain Exam Free Dumps

C_IBP_2502 SAP Certified Associate – SAP IBP for Supply Chain Exam Free Dumps

Share this post

Related Posts