D-VXR-DY-01 Dell VxRail Deploy Exam Free Dumps

dumps2025-04-08T11:19:56+08:00

D-VXR-DY-23 exam has been retired, and the new upgrade test is D-VXR-DY-01. If you decide to earn Dell VxRail Deploy V2 certification, passing D-VXR-DY-01 exam is a requried step. There are 56 questions in real D-VXR-DY-01 exam, and you have 120 minutes to answer all the questions. The required passing score for D-VXR-DY-01 exam is 63%. The available language is English. The exam price is $230. We provide the latest Dell VxRail Deploy V2 D-VXR-DY-01 exam dumps, which are your best material to pass the test easily. Free Dell VxRail Deploy V2 D-VXR-DY-01 exam dumps are available below.

Page 1 of 3

1. What is the minimum number of nodes required to enable vSAN on a VxRail cluster?

2. Which of the following are required steps for expanding a VxRail cluster by adding new nodes? (Choose three)

Run the VxRail initialization wizard

Ensure that all new nodes are running the same VxRail version as the existing nodes

Power off all nodes before adding the new ones

Connect the new nodes to the same network switches as the existing nodes E) Update the vCenter Server to the latest version before adding nodes

3. What does the VxRail Manager plugin for vCenter primarily manage?

Network segmentation

Cluster lifecycle operations

VM migration

Virtual SAN encryption

4. Which of the following network configurations are required for VxRail deployment? (Choose two)

A dedicated management VLAN

Jumbo frames enabled for vSAN traffic

Separate VLANs for vMotion and vSAN traffic

1 Gbps Ethernet for all traffic types E) Static IP addresses for each node

5. Which vSphere feature must be configured before enabling vSAN on a VxRail cluster?

High Availability

Distributed Resource Scheduler

vSphere Replication

Fault Tolerance

6. In a VxRail environment, which factors can impact the performance of vSAN? (Choose three)

Disk group configuration

Number of disk stripes per object

VM snapshot frequency

CPU overcommitment E) RAID level of the vSAN disk group

7. Which version of VMware ESXi is supported on VxRail 7.0?

6.5

6.7

7.0

7.0 U2

8. Which of the following tasks can be performed using VxRail Manager? (Choose four)

Monitoring system health

Deploying new VMs

Managing lifecycle updates

Configuring vSAN settings E) Integrating with third-party backup solutions F) Expanding storage capacity

9. What type of network switch configuration is recommended for VxRail deployment?

Layer 3 routing with static routes

Layer 2 switching with VLAN segmentation

Spanning Tree Protocol enabled across all ports

No configuration required; plug-and-play setup

10. In a stretched VxRail cluster, which of the following conditions must be met to achieve site resilience? (Choose two)

Both sites must have equal numbers of nodes

A third site is required for the Witness Node

The primary site must be within 5 milliseconds of the secondary site

Storage policies must be configured for site affinity E) The cluster must use all-flash storage

Page 2 of 3

11. How does VxRail handle software updates across multiple nodes?

By updating all nodes simultaneously

By updating nodes one at a time in a rolling fashion

By shutting down the entire cluster before updating

By migrating VMs off each node before updating

12. Which of the following are considerations when planning a VxRail upgrade? (Choose three)

Ensuring vSphere and vSAN versions are compatible with the new VxRail version

Backing up VMs before initiating the upgrade

Temporarily disabling DRS during the upgrade process

Monitoring network latency during the upgrade E) Verifying storage policies before and after the upgrade

13. What is the function of VxRails RecoverPoint for VMs?

To provide continuous data protection for VMs

To replicate VMs across different clusters

To encrypt VM data at rest

To manage VM snapshots

14. In which scenarios should the VxRail stretched cluster feature be deployed? (Choose two)

To provide disaster recovery across geographically dispersed sites

To consolidate multiple clusters into one

To ensure zero RPO in the event of site failure

To simplify network management across multiple locations E) To reduce the number of vSphere licenses needed

15. What is the default vSAN storage policy applied to VMs in a VxRail cluster?

RAID-0 for maximum performance

RAID-1 for redundancy

RAID-5/6 for space efficiency

RAID-10 for balanced performance and redundancy

16. Which actions should be taken to troubleshoot vSAN performance issues in a VxRail environment? (Choose four)

Check disk I/O latency

Review network bandwidth utilization

Increase the number of disk stripes per object

Rebuild all vSAN disk groups E) Validate the vSAN health status F) Ensure proper VM placement based on DRS recommendations

17. Which component of VxRail is responsible for managing software updates and patches?

VxRail Manager

vCenter Server

ESXi Host Client

VxRail Plugin

18. Which conditions must be met to enable data-at-rest encryption in a VxRail environment? (Choose two)

A Key Management Server (KMS) must be configured

All nodes must be upgraded to the latest VxRail version

A separate vSAN cluster is required

VMkernel NICs must be configured for encryption traffic E) All VMs must be migrated to encrypted datastores

19. What is the primary benefit of using vSAN deduplication and compression in a VxRail cluster?

Enhanced data protection

Improved read/write performance

Reduced storage capacity consumption

Faster VM migration across hosts

20. Which of the following can cause vSAN object resynchronization in a VxRail cluster? (Choose three)

Disk failure within a disk group

A VM snapshot being deleted

A node being added to the cluster

Changes to a VMs storage policy E) Powering off a VM unexpectedly

Page 3 of 3

21. What feature does VxRail use to ensure VM data is protected across multiple failures?

Site Recovery Manager

Data Domain Integration

Erasure Coding

VMotion

22. Which best practices should be followed when deploying a VxRail cluster to ensure optimal performance? (Choose three)

Configuring dedicated VLANs for management and vSAN traffic

Using 1 Gbps NICs for vSAN traffic

Implementing LACP on network switches

Enabling Jumbo Frames on all vSAN networks E) Separating VM network traffic from management traffic

23. What is the minimum number of fault domains required to support a VxRail cluster with RAID-5 configuration?

24. Which of the following are critical steps in preparing for a VxRail upgrade? (Choose three)

Backing up the vCenter Server database

Verifying that all nodes have sufficient free space

Creating a maintenance window with minimal user impact

Temporarily migrating VMs to another cluster E) Checking for hardware compatibility with the upgrade

25. How does VxRail Manager ensure that upgrades do not disrupt critical workloads?

By automatically migrating VMs to a different cluster

By applying updates in a rolling fashion across nodes

By scheduling upgrades during off-peak hours

By isolating the upgrade to the management network

26. What must be configured before enabling vSphere HA on a VxRail cluster? (Choose two)

Primary and secondary management networks

Shared storage for all cluster nodes

A static IP address for each VMkernel adapter

Admission control policies E) Distributed Switches for VM network traffic

27. Which VxRail feature helps to maintain consistent VM performance during disk failures?

VM snapshotting

vSAN cache tier

Data-at-rest encryption

DRS (Distributed Resource Scheduler)

28. Which factors should be considered when planning a VxRail stretched cluster deployment? (Choose four)

Latency between sites must be less than 5 milliseconds

Both sites must have an equal number of nodes

The Witness Node must be placed in a third site

Storage policies must be configured for site locality E) Backup and recovery must be configured for each site F) All nodes must be configured with the same hardware specifications

29. What is the purpose of the vSAN Witness Node in a VxRail stretched cluster?

To store a copy of all VM data for disaster recovery

To provide a quorum to prevent split-brain scenarios

To manage the replication of VM snapshots

To monitor the health of the vSAN disk groups

30. Which of the following are valid reasons to perform a VxRail cluster expansion? (Choose three)

To improve storage capacity by adding more disk groups

To reduce network latency within the cluster

To increase compute resources for running more VMs

To upgrade the cluster to the latest VxRail version E) To add fault tolerance by including additional nodes

D-VXR-DY-01 Dell VxRail Deploy Exam Free Dumps

D-VXR-DY-01 Dell VxRail Deploy Exam Free Dumps

Share this post

Leave a Reply Cancel reply

Related Posts