Dell Avamar Operate 2023 D-AV-OE-23 Exam Dumps

dumps2024-03-08T08:43:09+08:00

Dell Avamar Operate 2023 D-AV-OE-23 exam dumps are available online for you to study and pass. Reading the D-AV-OE-23 exam information is the first step to preparing for the test well. There are 60 questions in the real D-AV-OE-23 exam, and you have 90 minutes to answer all the questions. The required passing score for the D-AV-OE-23 exam is 63%. Our new cracked Dell Avamar Operate 2023 D-AV-OE-23 exam dumps can guarantee you pass. Free Dell Server D-AV-OE-23 exam dumps are available below.

Page 1 of 14

1. A system administrator wants to check Avamar maintenance activity logs.

Which commands could they use?

mccli and avmaint

dumpmaintlogs and avmaint

dumpmaintlogs and avtar

mccli and avtar

2. Which type of VMware backup methods does EMC Avamar version 5.x and above support for ESX Server 4.0 and later versions?

Guest and VMware Image Proxy

Guest, VCB, and VMware Image Proxy

Guest and VCB

VCB and VMware Image Proxy

3. How many concurrent backup connections per storage node are supported by a multi-node Avamar server?

128

4. What is used to transfer configuration files to the EMC Avamar switch?

TFTP

SFTP

FTP

SCP

5. You are performing an ad-hoc backup from a Microsoft Windows client.

Which log file would you use to investigate communication issues between the Avamar client and the Avamar server utility node?

avagent.log

COD-workorder-Windows.log

MOD-workorder-Windows.log

err.log

6. A company has just deployed a VMware environment. The EMC Avamar storage administrator wants to ensure they receive the highest level of deduplication within the environment for backups.

Which type of backup should be performed?

Guest

ESX console

VCB

vSphere Image

7. By default, which snapshots are retained?

All checkpoints created in the last two days

The two checkpoints created during the maintenance window plus two created outside the maintenance window

The last two including the last validated checkpoint

The last two validated checkpoints in the last two days

8. What is a supported Avamar configuration?

1 x 16 + 2 (1 utility node x 16 storage nodes) + 2 spare nodes

1 x 17 (1 utility node x 17 storage nodes)

1 x 1 + 1 (1 utility node x 1 storage node) + 1 spare node

1 x 16 + 1 (1 utility node x 16 storage nodes) + 1 spare node

9. Which type of Dell EMC Avamar HFS check validates all new, modified, and some unmodified stripes?

Full

Reduced

Metadata

Rolling

10. What are the recommended RAID types for physical disks that store virtual disks for EMC Avamar Virtual Edition?

RAID 1 or RAID 5

RAID 1 or RAID 10

RAID 5 or RAID 6

RAID 10 or RAID 6

Page 2 of 14

11. GSAN just went down on the EMC Avamar server and is currently the backup window. EMC Support has indicated that the Avamar server will need to be rolled back. The checkpoints in the environment are completed automatically.

By default, to which time period can GSAN be rolled back?

Immediately after the last backup ran

During the last backup window

When GSAN went down

During the last maintenance window

12. An EMC Avamar server is integrated with an EMC Data Domain system. A backup has expired on the Avamar server and garbage collection runs.

What is the impact to the backup stored on the Data Domain system?

The backup is deleted based on Data Domain retention policies

The backup is deleted from the Data Domain system

HFS check is run on the backup on the Data Domain

The backup is immediately replicated to another Data Domain

13. Which information must be provided to [email protected] after the Avamar software has been installed?

Company name

Party ID

Avamar System ID

Avamar cabinet serial number

14. What is the average chunk size range after compression in an EMC Avamar system?

8 - 12 KB

12 - 16 KB

16 - 32 KB

32 - 64 KB

15. A multi-node EMC Avamar server is backing up clients worldwide.

What must the storage administrator keep in mind to help ensure that backup schedules do not conflict with the Avamar server blackout window?

Time basis for a backup schedule is the local time of the Avamar Administrator session

Time basis for clients is the local time where the Avamar server utility node resides

Time basis for the GSAN is the local time zone where the server resides

Time basis for the maintenance schedules is GMT/UTC

16. An EMC Avamar backup administrator is logged in as root. The administrator is running a mapall date command to all nodes, all of which respond with a password prompt.

Which SSH keys need to be loaded?

dpnid account

MCUser account

root account

customer's account

17. An Avamar storage administrator manually runs a backup job with a retention time of 60 days. After the backup completes, the administrator notices that the retention tag was set to "N".

Why did this occur?

Minimal retention time was set to "disabled"

On-demand backups are always assigned a retention tag of "N"

No end date was set for the basic retention policy

End-user on-demand retention was set to "no end date"

18. What is the minimum number of EMC Avamar active storage nodes required for a supported RAIN configuration?

19. Approximately how many objects can a single data stripe hold?

10,000

30,000

64,000

128,000

20. How many simultaneous client connections are allowed for an Avamar Virtual Edition server?

Page 3 of 14

21. What happens when an EMC Avamar advanced retention policy is used for backups?

Retention rules are applied to backups based on the backup completion time

Retentions are dynamically assigned to scheduled backups based on when the backups occur

The daily retention value is automatically assigned to on-demand backups

An upper retention limit is dynamically applied to all backups

22. In an Avamar server rack architecture, where are the utility node and two internal switches located?

The two internal switches are at the top of the rack The utility node is above the spare node at the center of the rack

One internal switch is installed at the top of the rack The second switch is above the utility node, which is at the bottom of the rack

The utility node is at the top of the rack The two internal switches are at the bottom of the rack

The utility node is at the bottom of the rack The two internal switches are at the top of the rack

23. When a backup is initiated by the EMC Avamar client application, how is the retention determined?

End User On-Demand Retention policy

Retention policy of the default group

Retention policy of the clients group

Retention policy for the domain

24. What are the requirements for the virtual processor(s) dedicated to EMC Avamar Virtual Edition at all times?

One 2 GHz virtual processor

One 4 GHz virtual processor

Two 2 GHz virtual processors

Two 3 GHz virtual processors

25. By default, which percentage of the file system storage space is reserved for operating systems and checkpoint overhead on the EMC Avamar server?

26. What are two available capacities for a Single Node Avamar Data Store Gen4T? (Select 2)

8.0 TB

3.9 TB

7.8 TB

1.0 TB

27. What type of views does Event Management offer?

Critical, Error, and Warning

Informational, Warning, and Critical

Informational, Critical, and Error

Warning, Informational, and Error

28. A backup administrator is configuring Cloud Tier in Avamar and receives the following error message. "cloud units failed to load" What would prevent the cloud units from loading?

Maintenance jobs are disabled

Cloud Tier is not enabled on the Data Domain

Replication jobs are still running

Backup jobs are still running

29. A company located in the Netherlands has recently acquired a company in Italy. Because both locations have their own file servers containing sensitive data, the company wants to back up everything to their central backup repository in the Netherlands. The company only has a 2 Mb/s connection between both locations.

Which EMC product is recommended to back up everything to the Netherlands location?

NetWorker

Avamar

Backup and Recovery Manager

Data Domain

30. By default, which process runs on the EMC Avamar utility node?

GSAN

MCS

ayscc

SNMP

Page 4 of 14

31. An EMC customer is using EMC NetWorker and Data Domain in their backup environment. They now want to install an EMC Avamar server and monitor all products from a single console.

Which software would you recommend?

Replication Manager

Backup and Recovery Manager

Enterprise Manager

Data Protection Advisor

32. A storage administrator needs to schedule backups.

Which of the following is considered a best practice when defining schedules?

Backups towards the end of the maintenance window should be avoided

Backup/maintenance windows must maintain their default settings

Scheduled backups should be scheduled outside of daylight savings time transitions

Use multiple backup schedules and avoid overlapping with the maintenance window

33. Which tool is used to move a client to a new domain in EMC Avamar 6.0?

Client Manager

Activation Manager

Enterprise Manager

Installation Manager

34. What is an EMC Avamar best practice for setting backup retention policies for a new backup environment?

Use advanced retention policies for monthly backups only

Create an individualized retention policy for each client

Develop retention policies before taking production backups

Retain all daily backups for at least 30 days

35. How many simultaneous client connections per node will an EMC Avamar server support?

36. A file server-only environment is backing up data to a 1.0 TB EMC Avamar Virtual Edition server.

On average, how much new backup data may be added per day to remain in a steady capacity state?

2 GB

4 GB

6 GB

8 GB

37. A backup administrator has configured a new cloud tier policy. The policy has run, but the capacity of the Data Domain has not decreased yet.

What is the most likely cause?

Data Domain needs to resynchronize with the cloud unit

Data Domain still needs to move the data to the cloud

The backup retention is still valid

The backup was replicated to a destination server

38. Your readiness checks show that a customer's Gen4 Avamar server has entered a read-only status.

To avoid data loss, which recommended state should the Avamar server be in before you can continue the "Add Node" procedure?

Known good controlled state

Read-only state

Steady state

Suspended state

39. What are the Avamar 6 install and upgrade rules for Gen1 through Gen4 node technology?

Gen4/3 can be installed new or upgraded. Gen2 can be upgraded only. Gen1 cannot be installed new or upgraded.

Gen4 can only be installed new. Gen3/2 can be installed new or upgraded. Gen1 cannot be installed new or upgraded.

Gen4 can be installed new or upgraded. Gen3/2/1 can only be upgraded.

Gen4 can only be installed new. Gen3/2 can only be upgraded. Gen1 cannot be installed new or upgraded.

40. A customer has restarted the MCS service on their Avamar server to apply a configuration change made in the mcserver.xml file. The daily scheduled backups have not started, although they can connect successfully to the Avamar Administrator.

Which task should be performed?

Restart the backup scheduler

Verify that GSAN service is running

Restart the MCS service

Verify that the garbage collection is not running

Page 5 of 14

41. Where are replication log files stored on an EMC Avamar server?

/usr/local/avamar/var/cron/replicate.log

/usr/local/avamar/var/log/replicate.log

/usr/local/avamar/var/cron/log/replicate.log

/usr/local/avamar/log/replicate.log

42. A company using EMC Avamar has decided to virtualize their Microsoft Exchange environment using VMware guests instead of physical systems.

Which methodology is used to perform online backups of the Microsoft Exchange environment?

VMware Guest Level Backup

VMware Consolidated Backup

VMware Image Level with Change Block Tracking

VMware Image Level without Change Block Tracking

43. Which factor(s) affect the capacity utilization in an EMC Avamar environment?

Total amount of primary data being backed up

How often the backups are scheduled to run

Size of the grid and license amount

Whether HFS check succeeds every day

44. Refer to the exhibit.

Shown is a diagram of the domain structure of an EMC Avamar server.

How does this domain structure deviate from best practices?

Domain2 should not be nested in another domain

Domain3 should have at least one client

ClientA should not be registered in the root domain

ClientB should not be in a domain that also contains a domain

45. What is the maximum number of simultaneous backups that can be performed using an EMC Avamar NDMP accelerator with 32 GB of RAM for EMC Celerra DART 6?

46. What are the two key features of the Data Domain Cloud Tiering solution?

Restore to clients and fixed-length level deduplication

Single administrative step backup recall from DD Cloud Tier and fixed-length level deduplication

Age-based policy support for DD Cloud Tier and restore to clients

Age-based policy support for DD Cloud Tier and variable-length level deduplication

47. Which client process listens for a work order from the EMC Avamar server?

avagent

avtar

avscc

mcs

48. Based on the configuration represented in the exhibit, which type(s) of EMC Avamar replication can be used?

Normal

Full copy

Root-to-root

Normal and root-to-root

49. How long are the Avamar Fitness Analyzer results cached from the time of creation?

5 Min

10 Min

15 Min

30 Min

50. A Dell EMC Avamar backup administrator wants to add end-user workstations to the backup environment.

Which end-user function is enabled by default?

Override the daily schedule

Modify the backup retention policy

Select any data on their workstation to back up

Run on-demand backups

Page 6 of 14

51. Which components are members of a Dell EMC Avamar group?

Profile, dataset, and retention

Attribute, retention, and schedule

Dataset, schedule, and profile

Dataset, schedule, and retention

52. A backup administrator is performing a disaster recovery for a Windows Server 2008 system. However, the Avamar Disaster Recovery Wizard is unable to perform the recovery.

What is a possible reason for this?

Windows 2008 OS software has not been installed on the replacement hardware

The Avamar Disaster Recovery Wizard does not support Windows 2008

A backup using the Windows VSS plug-in and the full file system was not performed

A backup using the Avamar Server Restore Option was not performed

53. The EMC Avamar Procedure Generator expires on a periodic basis, requiring connecting to the EMC network for an update.

How often does this happen?

Every four days

Every week

Every two weeks

Every four weeks

54. What is the correct sequence of steps in EMC Avamar deduplication processing?

55. GSAN is currently unresponsive on the Avamar server. Dell EMC Support has indicated that the Avamar server will need to be rolled back.

What is the default number of checkpoints available for rollback?

56. A storage administrator is performing maintenance on an EMC Avamar server. While working, the administrator notices that a client backup, already running, was queued briefly.

What caused this effect?

Restore

Replication

Garbage collection

HFS check

57. In steady state, what is the approximate rate of data removed from an Avamar grid during a daily garbage collection?

10 GB per hour per node

10 GB per hour per grid

100 GB per hour per node

100 GB per hour per grid

58. What does the "Completed with Exceptions" backup status indicate?

Large amount of activity without any backup data being restored

Backup is finished but some files were skipped

Activity was forcefully cancelled

The backup exceeded the scheduled window

59. What is the maximum number of nodes that can be configured for an EMC Avamar multi-node grid?

15 storage, 1 utility, 1 NDMP, and 1 spare

16 storage, 1 utility, and 1 spare

17 storage and 1 utility

17 storage, 1 utility, and 1 spare

60. An organization has multiple Dell EMC Avamar servers, the administrator wants to manage and monitor all Avamar servers using a centralized console.

Which Avamar tool facilitates the requirement?

Avamar Configuration Checker

Multiple System Management

Avamar Administration Console

Data Protection Advisor

Page 7 of 14

61. Which of the following is an Avamar operational best practice?

Limit storage capacity usage to 85% of the available GSAN capacity

Replicate contents of many sources to a single destination

Backup clients to a large, active, centralized server

Manage a single isolated environment with a policy definition

62. How many bytes, per entry, are added to the Dell EMC Avamar hash cache?

63. What must be included in a full system backup for an EMC Avamar Windows Server 2012 bare metal recovery?

System state backed up with the Windows VSS plug-in

All device drivers for the new hardware system

Network address of the Avamar backup server

WinPE file

64. When configuring basic networking for the storage nodes in a multi-node EMC Gen4 Avamar, which port is used to perform this operation?

iDRAC

GB1

GB3

GB4

65. Where is the metadata stored, when a Dell EMC Avamar is integrated with Data Domain?

Data Domain

Avamar server

Avamar Client

Cloud

66. The exhibit shows a portion of a DPN Summary report.

Which field on the report indicates how much data has been transferred to the EMC Avamar server?

ModSent

TotalBytes

ModReduced

PcntCommon

67. An Avamar has reached the maximum number of MTrees on Data Domain.

What is this number?

100

336

500

68. What are the EMC Avamar daily activities that run during the maintenance window?

Checkpoint and HFS check

Garbage collection and HFS check

HFS check and Rollback

Checkpoint and Rollback

69. To allow replicated backups to be managed from the source Dell EMC Avamar servers, which values in the mcserver.xml file should be set to true?

allow_dest_replica_management allow_manage_remote_backups_at_source

allow_dest_replica_management repl_adhoc_priority show_external_backups

allow_dest_replica_management show_external_backups allow_manage_remote_backups_at_source

show_external_backups allow_manage_remote_backups_at_source

70. An EMC Avamar administrator is using Avamar to perform Microsoft Windows Server 2012 disaster recovery backups.

What occurs during a bare metal recovery of Microsoft Windows Server 2012?

A new client is booted from the WinPE disk

Microsoft Windows 2012 is re-installed

All applications and their files are installed

WinPE automatically finds and loads any missing drivers

Page 8 of 14

71. When sizing a large database server on an EMC Avamar, how many bytes per entry are added to the hash cache?

72. How much RAM is required for an EMC Avamar Gen4 utility node?

4 GB

8 GB

12 GB

24 GB

73. A Microsoft Windows user is about to initiate an on-demand backup from the client interface when the utility node fails on their multi-node EMC Avamar grid.

What must be done prior to initiating the backup to ensure the backup will complete successfully?

Nothing. Backups are performed from the client to the storage nodes directly.

The utility node must be replaced and the configuration restored prior to starting the backup.

The spare node must be converted to a utility node and the configuration restored to it prior to starting the backup.

The client must be activated temporarily to the first storage node and then the backup can continue.

74. Starting at the bottom, what is the recommended order for racking components in a Gen4 EMC Avamar Data Store rack without premium support?

Utility, spare, storage, switches

Switches, utility, storage, spare

Switch A, utility, spare, storage, Switch B

Switch A, spare, storage, utility, Switch B

75. How many hours does the benchmark test run in an EMC Avamar Virtual Edition install?

76. What is the maximum storage capacity in a single-node configuration of the Avamar server?

2TB

3.9TB

7.8TB

16TB

77. During the EMC Avamar maintenance window, what is the maximum number of backups for a multi-node Avamar server?

2 for the Avamar server

4 for the Avamar server

4 per storage node, minus 1 per server

8 per storage node, minus 1 per server

78. A company has a Dell EMC Avamar client with 4 GB RAM, with default cache settings.

What is the maximum size of the hash cache they can use?

192 MB

256 MB

512 MB

1024 MB

79. Refer to the graphic.

Backups for a site began on February 5 and will run daily at 2 AM.

If using an advanced retention policy with default settings, what is the complete list of tags assigned to the backup that runs on February 10?

D, W

N, W

D, N, W

80. A company is using an EMC Avamar multi-node server with 2 TB storage nodes. The company wants to add 3 TB of Avamar storage to the multi-node server.

How can this be achieved?

Add one 3.3 TB storage node

Add two 2 TB AVEs

Add two 2 TB storage nodes

Add three 1 TB storage nodes

Page 9 of 14

81. The AVE administrator would like to configure Avamar checkpoints to be stored on a Data Domain system.

What is the minimum system requirement for this configuration?

DD OS 5.3

DD OS 5.5

DD OS 5.7

DD OS 6.0

82. Which Avamar technology protects the data in the event of an operational failure?

Replication

RAIN

RAID

Checkpoints

83. A backup administrator must add a new domain to the Avamar server.

What AUI Navigation Pane option should they choose?

Setting

Administration

Policy

Asset Management

84. What are the three O/S user accounts that are used by the EMC Avamar server for authentication?

root, admin, and dpn

root, MCUser, and repluser

admin, MCUser, and repluser

root, dpn, and MCUser

85. In which directory are the EMC Avamar administrator logs located?

/usr/local/avamar/var/mc/server_log

/usr/local/avamar/var/log

/usr/local/avamar/etc

/data01/cur

86. An EMC Avamar Gen4 server has arrived at a customer’s site. You begin reviewing the hardware for an Avamar 6 installation. You find that two of the five nodes are Gen3 running RHEL OS and the others are running SLES OS.

Can you proceed with the install?

No. All nodes in a Gen4 server must be Gen4 running SLES O

Yes. The two nodes running RHEL can be re-kickstarted with SLES O

Yes. The three nodes running SLES can be re-kickstarted with RHEL O

No. All nodes in a Gen4 server must be Gen4 running RHEL O

87. A storage administrator is using Avamar to perform backups of their Microsoft Windows 2012 servers for disaster recovery. The administrator wants to prepare for a bare metal recovery.

What is a requirement?

Identical hardware

WinPE ISO

CDs for application executables

Windows shared cluster storage

88. What is the maximum number of backups that can be running per Avamar storage node in order for HFS check to initiate successfully?

89. What is an EMC Avamar best practice for reducing the amount of back-end storage for daily backups?

Use advanced retention policies

Set retention to seven days

Retain only one checkpoint at a time

Create multiple datasets per client

90. What is the URL to access the Avamar Web User Interface?

https://avamar-server:7543

https://avamar-server/aam

https://avamar-server/avi

https://avamar-server/aui

Page 10 of 14

91. Which virtual environments are supported by EMC Avamar for image backup while the virtual machine is powered on?

Oracle VirtualBox and Microsoft Hyper-V

VMware and Microsoft Hyper-V

Open Source KVM and VMware

Citrix XenDesktop and Citrix XenServer

92. What does an HFS check do?

Validates the integrity of a checkpoint

Performs server checkpoint rollbacks

Performs a snapshot of an Avamar server

Checks for RAID controller errors

93. After the integration of Data Domain with Avamar, which utility on the Avamar utility node is responsible for performing the maintenance operation for backup data on Data Domain?

ascd

ddrmaint

Garbage collection

avmaint

94. A company wants to perform image level backups of their VMware virtual machines. They require a very low recovery time objective (RTO). However, they are not willing to wait for the image data to be restored to the VMware datastore.

Which EMC Avamar solution should be recommended to the company?

Avamar Business Edition with an Accelerator node

Avamar integration with Data Domain

Avamar integration with vMotion

Avamar integration with NetWorker

95. Which percent of the total available bandwidth will replication only use as a TCP application?

40% to 50%

50% to 60%

50% to 70%

60% to 80%

96. Which hash type represents an individual data chunk processed during an EMC Avamar backup?

Atomic

Root

Composite

Metadata

97. What is the maximum number of activity records under the activity monitor in Dell EMC Avamar Administrator?

72 hours, 5000 rows

96 hours, 6000 rows

120 hours, 7000 rows

144 hours, 8000 rows

98. A storage administrator is planning to back up virtual machines residing on an ESX 4.0 server using EMC Avamar and VMware vSphere.

What is a characteristic of this type of backup?

Image proxy is located on a virtual machine

Avamar Interoperability Module must be installed

All virtual machines must be powered on

All virtual machines must be running Microsoft Windows 2003

99. Which RAID types does Avamar support?

RAID-6 and RAID-5

RAID-10 and RAID-5

RAID-10 and RAID-6

RAID-1 and RAID-6

100. What statement describes basic replication for a single Avamar node?

Replication is done through dedicated network to either a multi-node or single target node by default

Replication is done over the same network to either a multi-node or single target pair

Replication is one-way communication to a multi-node target system only

Replication needs dedicated networks on source and target systems

Page 11 of 14

101. You are configuring standard replication for a source EMC Avamar system, Avamar1, under the clients domain. The configuration is successful, and the client inquires about where the replicated clients appear on the target Avamar system.

Which domain contains the source clients on the target system?

/REPLICATE/Avamar1

/REPLICATE/Avamar1/clients

/root/clients

/clients/Avamar1

102. A company's Avamar-only server has a 30 day backup retention period. The Avamar server has been running daily maintenance and backup windows successfully. A request is made to restore a file that was deleted 35 days ago.

Will the requested file be available on the Avamar server, and why?

No. HFS check has been running and it deletes unused chunks from backups that have expired.

Yes. The latest checkpoint will have the file.

Yes. By default, the Avamar server only runs garbage collection once a week.

No. Garbage collection has been running and it deletes unused chunks from backups that have expired.

103. What is a characteristic of EMC Avamar Hyper-V backup and restore?

A proxy server must be used for backup and restores

Restores are performed at the image level only

Hyper-V machines can be standalone or clustered

Virtual machines must be powered on and online

104. What happens when a domain containing clients is deleted?

Clients are deleted; their backups are deleted

Clients are deleted; their backups are maintained

Clients and their backups are moved to the MC_SYSTEM domain

Clients are automatically retired; their backups are maintained

105. A company installed the latest version of a Dell EMC Avamar server. They want to activate about 1200 clients.

Which recommended method can they use for sending invitations simultaneously to all clients?

Interactive server-side registration

Batch client registration

Client-side registration

Activation Manager

106. Which document should be approved and available to you at the time of a node addition to a customer's EMC Avamar server?

SVC Qualifier

Healthcheck report

ConnectEMC (SYR) report

Sales order

107. When using YAST to set up networking on a Gen4 Avamar node, how do you backspace in a field?

Ctrl-h

Ctrl-b

Backspace

Ctrl-c

108. Which Dell EMC Avamar Gen4T storage nodes are supported for a RAIN configuration?

1.3 TB and 2.6 TB

2.0 TB and 3.3 TB

3.3 TB and 7.8 TB

3.9 TB and 7.8 TB

109. What is the last step in the hardware installation portion of an EMC Avamar multi-node deployment?

Connecting to the customer network

Cabling the nodes to the switch

Powering on the nodes

Configuring the internal switches

110. An administrator wants to increase the capacity of an existing Avamar server running with the following configuration:

- 1 utility node

- 6 storage nodes (M1200)

- 4, 10 Gb ports

What is the capacity of the new node to be added?

1.3 TB

2 TB

3.9 TB

7.8 TB

Page 12 of 14

111. What is used by Avamar to identify the backup data on the PowerProtect DD appliance?

root hash

Metadata

Dell Avamar Operate 2023 D-AV-OE-23 Exam Dumps

Dell Avamar Operate 2023 D-AV-OE-23 Exam Dumps

Share this post

Leave a Reply Cancel reply

Related Posts