D-PEMX-DY-23 Dell PowerEdge MX Modular Deploy 2023 Exam Dumps

dumps2024-03-08T08:34:03+08:00

D-PEMX-DY-23 Dell PowerEdge MX Modular Deploy 2023 exam tests the knowledge and skills for successfully configuring, managing, and troubleshooting Dell PowerEdge MX systems. The Dell Server D-PEMX-DY-23 exam contains two parts: Part 1 contains 39 questions with a duration of 75 minutes, and the pass score is 63%; Part 2 contains 9 simulations with a duration of 45 minutes, and the pass score is 66%. You need to pass both parts to pass the D-PEMX-DY-23 exam. We provide the latest Dell PowerEdge MX Modular Deploy 2023 D-PEMX-DY-23 exam dumps, which are valuable in your preparation. Free Dell Server D-PEMX-DY-23 exam dumps are available below.

Page 1 of 5

1. What is a valid option when resetting iDRAC to factory defaults?

Preserve user and network settings

Preserve network and storage settings

Preserve identity and network settings

Preserve storage and user settings

2. Which ports will be active in an MX9116n FSE if there are dual-port NICs in all the server sleds?

even-numbered server-facing ports

server-facing ports 9C16

odd-numbered server-facing ports

server-facing ports 1C8

3. What type of connection is used by QuickSync 2?

Bluetooth

NFC

QuickAssist

LTE

4. A network administrator must implement a 100 GbE network in their MX7000 chassis group.

Which two components satisfy this requirement?

(Select 2)

Z9432F-ON

MX7116n

Z9332F-ON

MX9116n

MX8116n

5. Why is the backup lead configuration important in an MCM Group?

The configuration allows sharing of the lead chassis IOMs and Management Module databases.

The backup lead chassis facilitates management of systems when the existing lead chassis fails.

The backup chassis is promoted automatically if the lead chassis fails.

This configuration allows configuration changes from the backup chassis.

6. Which I/O module is supported for Fabric B?

MX5016s

MSG610s

MX5000s

MX5108n

7. What configuration is supported for a fully populated MX740c compute sled?

1 Fabric B mezz card 1 Fabric C mezz card with Fabric A being integrated into the system board

1 Fabric A mezz card 1 Fabric B mezz card with Fabric C being integrated into the system board

2 Fabric A mezz cards 2 Fabric B mezz cards 2 Fabric C mini-mezz cards

1 Fabric A mezz card 1 Fabric B mezz card 1 Fabric C mini-mezz card

8. Which protocol(s) does Redfish use?

JSON and OData only

JSON only

JSON, OData, and SNMP

OData only

9. A systems administrator must extract log files from an MX7000. The logs cannot be saved locally and must only be stored on a secure file server.

Which share protocols can they use to save the logs?

NFS and HTTPS

CIFS and NFS

HTTPS and SFTP

HTTPS and SCP

SFTP and CIFS

10. A customer is implementing a clustered three-chassis solution.

Which two components are required?

(Select 2)

Pass-Through module

MX9116n

MXG610s

MX7116n

Page 2 of 5

11. What is the number of server-facing ports and the bandwidth of each port on the MXG610s?

(Choose two.)

8x 16 Gbps

16x 32 Gbps

16x 16 Gbps

8x 32 Gbps

12. What does OBPAR allow on a PowerEdge MX750c?

Run a compute sled with memory overclocking.

Boot a compute sled with only one CP

Run a compute sled with maximum performance.

Boot a compute sled with reduced frequency.

13. An administrator is about to perform a firmware update on an MX9116n switch OS 10 from the CLI. The latest OS 10 switch firmware image has been downloaded and their TFTP server is set up. Upon logged in with administrator credentials on the switch, which command should be used to start the update procedure?

firmwaredownload tftp://server-ip/imagename

install tftp://server-ip/imagename

fwupdate tftp://server-ip/imagename

upgrade tftp://server-ip/imagename

14. Which three components are required in an MX7000 chassis to allow multiple compute sleds to share access to the same disks in an MX5016s enclosure?

(Select 3)

PERC H745PMX

Drive-assigned storage configuration

MX5000s IOM

Cluster-aware Operating System

HBA 330MMZ

15. The MX9116n FSE has two single-density QSFP28 port groups, and the default setting for these two ports is 1x 100GbE.

What other Ethernet breakout configurations are supported?

4x 10GbE 1x 40GbE 8x 25GbE 2x 50GbE

4x 10GbE 1x 40GbE 4x 25GbE 2x 50GbE

4x 10GbE 1x 40GbE 4x 8 Gb 4x 32 Gb

4x 16 Gb 2x 32 Gb 4x 25GbE 2x 50GbE

16. Which two-socket PowerEdge sled can support up to eight E3.s NVMe Gen 5 SSD drives?

MX740c

MX750c

MX760c

MX840c

17. Which is an invalid option for the PowerEdge MX7000 control panel?

LED with QuickSync 2

LCD with QuickSync 2

LED only

LCD only

18. What is a characteristic of MX7000 networking in Scalable Fabric Mode?

Enabled by default, all switch-specific OS10EE capabilities are available.

Layer 2 bridging is disabled be default and interfaces must join a bridge domain (VLAN) before being to forward frames.

All switch interfaces are assigned to VLAN 1 by default and are in the same Layer 2 bridge domain.

Available on MX9116n FSE and MX7116n FEM but not on the MX5108n.

19. Which VLAN is reserved for internal switch communication?

3939

4001

4021

20. A data center team is working on a solution to monitor and manage data center devices from anywhere.

Which feature can be configured to perform these tasks?

OIDC

OME-M

QAT

OMM

Page 3 of 5

21. When multiple MX9002m modules are daisy-chained to Top-of-Rack switches, which uplink port can be used for stacking?

Only the Gb2 port on the primary (left) MX9002

Gb1 uplink ports can only stack with other Gb2 ports

Either uplink port can be utilized

Only the Gb2 port on the secondary (right) MX9002

22. What are two considerations when adding an MX760c in a chassis running OME-M firmware earlier than v2.0?

(Select 2)

If the MX760c is a thermally challenged system, the maximum supported ambient temperature cannot be reduced.

If the MX760c is not a thermally challenged system, the sled is going to run as designed.

All the fans on the PowerEdge MX7000 must be Silver Grade.

If the iDRAC of the existing sleds is not at a supported level, ATMOS cannot calculate the maximum cooling.

23. Which is a logical resource in SmartFabric?

storage

servers

uplinks

switches

24. What type of video connector is available for KVM connectivity on the PowerEdge MX7000 chassis?

Mini-DVI

DisplayPort

VGA

Mini DisplayPort

25. An implementation engineer prepares to install a PowerEdge MX7000.

Which serial cable do they use?

USB-A --> Micro USB-B

DB9 --> DB9

USB-A --> USB-B

DB9 --> Micro DB9

26. What feature does OME-M v1.3 provide when replacing the Right Control Panel?

Chassis configuration is maintained.

MCM configuration must be reconfigured.

Chassis configuration must be reconfigured.

MCM configuration can be backed up in the cloud.

27. A server administrator wants to configure RAID on drives that are assigned to a compute sled.

Which interface can be used to complete the task?

OIDC

Storage sled assignment

RAID Controller settings

iDRAC

28. What are the correct CLI commands to configure the management IP Address on either the MX9116n or the MX5108n switches running SmartFabric OS10?

interface vlan 4020 no ip address ip address 192.168.1.10/24 no shutdown exit management route 0.0.0.0/0 192.168.1.1

interface mgmt 1/1/1 no ip address ip address 192.168.10.10/24 no shutdown exit management route 0.0.0.0/0 192.168.10.1

interface vlan 4020 no ip address ip address 192.168.1.10/24 no shutdown exit interface mgmt 1/1/1 no ip address ip address 192.168.1.10/24 no shutdown exit management route 0.0.0.0/0 192.168.1.1

interface vlan 4020 no ip address ip address 192.168.10.10/24 no shutdown exit interface mgmt 1/1/1 no shutdown exit management route 0.0.0.0/0 192.168.10.1

29. A system administrator must assign six of the MX5016s drives to a single MX750c compute node.

Which assignment mode accomplishes this task?

Multiple-assigned storage configuration

Drive-assigned storage configuration

PERC-assigned storage configuration

Enclosure-assigned storage configuration

30. What are the components of the control panel of a PowerEdge MX750c sled?

Power button USB 3.0 port micro DisplayPort iDRAC direct status LED

Power button USB 2.0 port micro DisplayPort iDRAC direct status LED

Power button USB 3.0 port iDRAC micro port iDRAC direct status LED

Power button USB 2.0 port iDRAC micro port iDRAC direct status LED

Page 4 of 5

31. Which feature in OpenManage Mobile can be used to allow the monitoring of a PowerEdge MX7000 chassis?

Redfish Provider

OIDC provider

Augmented Reality

OpenManage Essentials

32. An administrator is receiving notifications about insufficient power for a PowerEdge MX7000 chassis. The chassis is fed from two different power grids.

What is the best policy to maximize power and maintain uptime?

PSU Pairing

Grid Redundancy

PSU Redundancy

No Redundancy

33. Which micro controller-based module allows the Management Module to communicate with all the hardware present in a PowerEdge MX7000 chassis?

iDRAC

iSM

FReD

34. An administrator is asked to install and power-on a new MX740c sled in an MX7000 chassis. The administrator inserts the sled and presses the power button. They notice that the power button LED is blinking green. After a short time power button turns to solid green and the server finally turns on.

What operation was in progress when the power button was blinking green?

iDRAC was booting

Lifecycle Controller update was in progress

Lifecycle Controller was taking firmware inventory

iDRAC was updating firmware

35. What is the maximum number of mezzanine cards that can be installed in an MX840c?

36. A PowerEdge MX7000 administrator is tasked to perform a chassis update using a catalog.

Which source options are used to create the catalog?

Newest validated stacks of chassis firmware on dell.com Latest component firmware versions on dell.com Network path

Latest component firmware versions on dell.com Dell Update Package Network path

Newest validated stacks of chassis firmware on dell.com Dell Update Package Local Directory path

Newest validated stacks of chassis firmware on dell.com Latest component firmware versions on dell.com Local Directory path

37. What is a function of the Fabric Resources Director (FReD)?

SAS Expander routing for Fabric C

Hosting OME-M interface

Critical temperature monitoring

Providing QuickSync 2 feature

38. An administrator is sending servers to other individuals but wants to reset the server to the factory default first.

What LifeCycle Controller feature is used to complete this action?

Repurpose or Retire

Set BIOS to defaults

Delete RAID array

RACADM RACRESETCFG

39. What is the connection protocol between FReD and MM?

HDMI

Ethernet

I2C

40. Which two actions are possible using the Chassis Deployment Wizard?

(Select 2)

The LCD pin can be configured.

The administrator can use an existing chassis profile to configure the chassis.

The firmware catalog can be configured using the FTP protocol.

The network I/O Module password can be configured.

Page 5 of 5

41. A customer wants to change the switch operating mode from SmartFabric mode to Full Switch mode. After deleting the fabric in OME-M, what configuration is retained on the switch?

admin password, hostname, management IP Address, and the VLT domain configuration

admin password, hostname, and management IP Address

admin password, hostname, management IP Address, and all port breakout configuration

admin password, hostname, management IP Address, and the VLAN database

D-PEMX-DY-23 Dell PowerEdge MX Modular Deploy 2023 Exam Dumps

D-PEMX-DY-23 Dell PowerEdge MX Modular Deploy 2023 Exam Dumps

Share this post

Leave a Reply Cancel reply

Related Posts