Pass D-PDD-OE-23 Exam to Earn Dell PowerProtect DD Operate 2023 Certification

dumps2024-02-06T14:56:14+08:00

Passing the D-PDD-OE-23 exam is a required step for earning Dell PowerProtect DD Operate 2023 certification. D-PDD-OE-23 exam contains two parts: part 1 has 41 questions with a duration of 75 minutes, and the passing score is 63%. Part 2 has 9 simulations with a duration of 45 minutes, and the passing score is 66%. You need to pass both parts to pass the D-PDD-OE-23 exam. We have cracked the latest D-PDD-OE-23 exam dumps for you to study. Free Dell PowerProtect DD Operate 2023 D-PDD-OE-23 exam dumps are available below.

Page 1 of 5

1. A backup administrator is tasked with monitoring PowerProtect DD capacity metrics. The administrator is backing up 4 TB of data daily with a reduction rate at 5x. After data reduction, subsequent full backups compress down to 200 GB. The initial backup requires 800 GB with a 10 percent increase in the data each day.

Incremental backups are 400 GB. After data reduction, each incremental backup is 40 GB.

What is the weekly burn rate (GB) after four daily incremental backups and one weekly backup?

220

260

400

440

2. A backup administrator is tasked with monitoring changes in space availability and compression in relation to the cleaning process on the PowerProtect DD system.

Which chart in DDSM is used specifically to identify these trends?

Pre-Comp Used

Consumption

Space Usage

Daily Written

3. What is a characteristic of PowerProtect DD remote logging?

CLI command for remote logging is log watch

The basic CLI command for remote logging is log host

Must be enabled and verified through System Manager

Communicates only through TCP ports

4. Which of the following protocols are supported by PowerProtect DD for data movement to a cloud provider?

FTP and FTPS

VTL and DD Boost

CIFS and NFS

HTTP and HTTPS

5. An administrator is migrating their old cloud tier-enabled Data Domain to a new PowerProtect DD appliance with cloud tier. During migration, the administrator recognizes that file system cleaning on the source system is not possible.

What is the most likely cause of this behavior?

Filesystem is disabled on source system

Source system is running in restricted mode

Migration will restrict all activities on both systems

Migration will restrict all activities on source system

6. What is the recommended sizing of the MaxCapacity parameter in IBM Spectrum Protect when using a PowerProtect DD appliance?

2 GB

100 GB

200 GB

500 GB

7. An administrator monitors the performance statistics of a PowerProtect DD appliance. Low disk-write rates are shown, and the network inbound traffic is high.

What is the most likely cause of this behavior?

Expired segments

Known segments

Disk failure

NVRAM failure

8. What are some possible network bottlenecks for a PowerProtect DD?

Configuration, wire speeds, switches and routers

Connectivity, firewalls, and routing protocols

Connectivity, routing protocols, and configuration

Routing protocols, switches and routers, and wire speeds

9. When should using Virtual Synthetic backups be considered?

Daily incremental backups are larger than 15% of a normal full backup

PowerProtect DD appliance has more than 10 disks

Backups are nonfile system data such as databases

Backups are large and localized

10. Which two elements does DD Boost distribute parts of the deduplication process in a backup environment to enable faster and more efficient backup and recovery? (Select 2)

Production storage

Backup server

Application client

PowerProtect DD

Page 2 of 5

11. A company has SMT and VTL enabled on a PowerProtect DD appliance. They back up their data to virtual tape under a VTL pool named "finance".

Where is the backup data stored on the PowerProtect DD appliance?

/data/col1/<tenantname>/vtl/finance

/data/col1/<tenantname>/finance

/data/col1/finance

/data/col1/vtl/finance

12. What is the preferred method to ensure backups are protected against deletion or corruption?

Dell EMC Cloud Tier

Encryption

Retention Lock

Data Invulnerability Architecture

13. A company has DD Retention Lock Compliance enabled on an MTree. The file system is disabled due to tampering of the system clock.

Which user role has the privilege required to enable the file system?

Security Officer

Admin

Limited Admin

Tenant Admin

14. When using the DD VTL Tape Out to Cloud feature, which status will the tape report on the backup server once the tape is ready for long-term retention?

Mountable

Archived

Offsite

Nonmountable

15. When following Dell recommendations what adjustments should a customer make on the Microsoft Windows client when using CIFS on a PowerProtect DD appliance?

Adjust session timeout values and SNMP parameters.

Adjust SNMP parameters and TCP/IP parameters.

Adjust NTP parameters and SNMP parameters.

Adjust session timeout values and TCP/IP parameters.

16. Which PowerProtect DD feature can be used if the existing backup solution is designed using a tape-based logic?

DD Retention Lock

DD VTL

BoostFS

DD Boost

17. A backup administrator needs to retrieve an encrypted file that is in Azure Blob Storage.

To retrieve the file, what must the administrator do first?

Delete the file in Azure Blog Storage

Decrypt the file on the cloud tier

Decrypt the file in Azure Blob Storage

Recall the file to the cloud tier

18. A PowerProtect DD system is configured to with VTL. The backup application requires a minimum tape capacity of 1.5 TiB.

What is the minimum tape type to support this requirement?

LTO-3

LTO-5

LTO-6

LTO-4

19. Which protocol is used by Avamar to back up to PowerProtect DD?

DD Boost

VTL

CIFS

NFS

20. What is the correct sequence of steps to configure storage for Dell EMC Cloud Tier in the DD System Manager?

Page 3 of 5

21. What is one advantage of using PowerProtect DD instead of backing up to other disk-based file systems?

Data can be restored to any client operating system.

Data is stored locally on the client for fast restore.

Only deduplicated blocks of data are needed for full recovery.

Only deduplicated data is sent across the network.

22. A backup administrator has enabled the Retention Lock feature on their PowerProtect DD appliance. Over time, the administrator noticed an increase in file system utilization.

Upon further investigation, the administrator discovered expired files are still present on the appliance.

What is the most likely reason for this issue?

The atime of the file was set below the minimum retention period

File system cleaning was disabled

Backup application failed to delete the file after expiration

Retention Lock feature was disabled before the expiration date

23. A customer needs help deploying a shared PowerProtect DD. They ask for best practices when configuring SMT.

What network-related attributes must they configure to increase the security of each tenant unit?

- Tenant Unit IP Addresses - Tenant Unit Firewall Ports - Remote Data Access IP - Addresses Default Gateway

- Remote Data Access IP - Addresses Default Gateway - Tenant Unit Virtual Interfaces - Tenant Unit Hostname

- Local Data Access IP addresses - Remote Data Access IP Addresses - Default Gateway - Tenant Unit Firewall Ports

- Tenant unit Hostname - Local Data Access IP addresses - Remote Data Access IP Addresses - Default Gateway

24. What happens to the data when it is moved from the active tier to cloud tier?

It is deduplicated and stored in a file system in the native format

It is compressed and stored as object storage in a new format

It is compressed and stored in block storage in a new format

It is deduplicated and stored in object storage in the native format

25. A NetBackup administrator is using PowerProtect DD as a backup device with VTL.

Which component will perform the backup and restore operations to PowerProtect DD?

Backup Client

Storage Node

Primary Storage

Master Server

26. What is the maximum number of concurrently active MTrees that are supported on any PowerProtect DD appliance with DDOS 7.3?

100

256

512

27. An administrator is configuring Dell Cloud Tier with two cloud units. The first cloud unit is writing data to Amazon Web Services (AWS) S3 bucket and the second cloud unit is writing to an Azure Blob storage account.

What is the total capacity available to the second cloud unit?

Total capacity of the AWS S3 bucket

The maximum capacity of the active tier

Twice the capacity of the active tier

Total capacity of the Azure Blob storage account

28. What should be considered when using replication with Dell EMC Cloud Tier?

Cloud Tier-enabled systems must use collection replication

Source system must be running DDOS 5.7 or higher to support replication to the cloud

Replicated file is placed in the active tier first when Cloud Tier is enabled

Replicated file is placed in a cloud unit first if Cloud Tier is enabled

29. What is a requirement to use the PowerProtect DD HA feature?

A single set of shared storage

Dual set of shared storage configuration

Head units and notes require an active/active configuration

Each head unit requires its own FS25 shelf

30. Which cloud storage providers are included in the list of supported options for PowerProtect DD system?

Dell Elastic Cloud Storage (ECS) Amazon Web Services (AWS) Microsoft Azure Google Cloud Platform (GCP)

Dell Elastic Cloud Storage (ECS) Amazon Web Services (AWS) Oracle Cloud Microsoft Azure

Oracle Cloud IBM Cloud Alibaba Cloud Dell Elastic Cloud Storage (ECS)

IBM Cloud Google Cloud Platform (GCP) Alibaba Cloud Amazon Web Services (AWS)

Page 4 of 5

31. How can remote logging with a syslog server be configured on a PowerProtect DD system?

Use the CLI command log host enable

Use the DDSM to enable the remote logging

Remote logging is enabled by default

Use the DDMC to enable the remote logging

32. Which port must be open for DD Boost to communicate with the PowerProtect DD appliance for clone-controlled replication?

2051

111

2049

33. What is a key differentiator of Dell PowerProtect DD systems in terms of data handling during the write process?

Data is deduplicated after it is written to disk.

Data is stored in its original format without any optimization.

Data is encrypted after it is written to disk.

Data is deduplicated and encrypted inline as it is written to disk.

34. What is the maximum number of supported tape drives that can be configured using PowerProtect DD with at least 60 CPU cores?

256

512

1080

Unlimited

35. What is a benefit of the PowerProtect DD Secure Multi-Tenancy feature?

Enables deployment of DDVE systems in a public cloud

Provides a single cloud model for protection storage

Allows different cloud models for protection storage

Can be managed with DDSM

36. A backup administrator is tasked with monitoring PowerProtect DD capacity metrics. The administrator is backing up 2 TB of data daily with a reduction rate at 5x. After data reduction, subsequent full backups compress down to 100 GB.

The initial backup requires 400 GB with a 10 percent increase in the data each day. Each incremental backup is 200 GB. After data reduction, each incremental backup is 20 GB.

What is the weekly burn rate (GB) after four daily incremental backups and one weekly backup?

180

200

400

440

37. What is the maximum capacity for an on-premises DDVE with no cloud storage?

64 TB

96 TB

128 TB

256 TB

38. Following best practices for a PowerProtect DD NFS environment, what is the recommended value for rsize and wsize?

22768

30008

32768

42768

39. An administrator has retained snapshots for a single MTree and is trying to create a new one. An error message is received.

What is the reason for the failure?

The maximum number of snapshots has been exceeded

The DDOS needs to be upgraded

The user does not have the permission to retain more snapshots

There are not enough snapshot licenses

40. A PowerProtect DD administrator and a backup administrator are preparing for a new deployment. The PowerProtect DD system has two 1 GB NIC ports and two 10 GB NIC ports.

What is the recommended NIC configuration when the backup clients are using the DD Boost protocol to write to the PowerProtect DD?

One 1 GB and one 10 GB as failover and one 1 GB and one 10 GB IFGROUP

Two 1 GB as failover and two 10 GB as IFGROUP

Two 10 GB as failover and two 1 GB

Two 10 GB as failover and two 1 GB as IFGROUP

Page 5 of 5

41. For encryption at rest, when is encryption performed?

Tuesdays at 6am

After the data is written to disk

Tuesdays at 6pm

Before the data is written to disk

42. When following Dell best practices, what needs to be considered when creating tapes for a PowerProtect DD VTL configuration?

Use larger-sized tapes since some backup applications require block size of 256 KB or larger.

Use smaller tapes across many drives for greater throughput by using more data streams.

Use smaller tapes since traditional backup applications require block size of 64 KB by default.

Use larger-sized tapes across fewer drives for keeping configuration simplicity.

43. An administrator is using a BoostFS agent running on both Linux and Microsoft Windows servers.

What is the benefit of using BoostFS?

Backup window and replication improvement

More data compression

Link aggregation with dynamic interface groups

Capacity efficiency

44. Which of the following describes bringing data from the cloud tier to the active tier in protection storage?

File recall

Data movement policy

File restore

Tape out to cloud

Pass D-PDD-OE-23 Exam to Earn Dell PowerProtect DD Operate 2023 Certification

Pass D-PDD-OE-23 Exam to Earn Dell PowerProtect DD Operate 2023 Certification

Share this post

Leave a Reply Cancel reply

Related Posts