DES-1241 Specialist - Platform Engineer, PowerStore Questions - Free Latest Dumps for IT Certification Exams

DES-1241 Specialist – Platform Engineer, PowerStore Questions

dumps2021-12-08T06:15:21+08:00

dumps DELL EMC DES-1241 exam questions, DES-1241 Specialist - Platform Engineer, Free DELL EMC Certification DES-1241 exam, PowerStore exam 0 Comments

DES-1241 Specialist – Platform Engineer, PowerStore exam questions are available, which are the good material in your preparation. In real DELL EMC certification DES-1241 exam, there are 60 questions, and you have 90 minutes to write all the questions. The required passing score of DES-1241 exam is 63. Our DELL EMC DES-1241 exam questions and answers are the best guides for you to test the skills. Free DELL EMC Certification DES-1241 exam questions are available below.

Page 1 of 3

1. A Storage Administrator has just installed PSTCLI on a Linux client. The administrator is unfamiliar with the PSTCLI command list.

How can the administrator get a list of all PSTCLI commands from the cli> prompt?

Type the <Ctrl>+keys together

Press the <Tab> key

Use the show all command

Use the help all command

2. Which network is used for internal communication?

Intra-Cluster Data

Intra-Cluster Management

NAD Network

Inter-Node Network

3. DRAG DROP

Correctly order the steps of the embedded module replacement procedure.

4. A Storage Administrator ran a PSTCLI command on a Linux host. The error " -bash: pstcli: command not found" appears.

How is the problem resolved?

Add the installation directory to the PATH variable on shell initialization file

Install in default directory /opt/dellemc/pstcli-version/bin/

Add /opt/dellemc/pstcli/bin/in PSTCL

Run rpm -ihv pstcli to reinstall the PSTCLI software on the Linux host

5. Refer to the exhibit.

What is indicated when the circled LED on the node embedded module is illuminated solid amber?

System is booting

Module is faulted

Node is faulted

Cluster is uninitialized

6. What does the output of the PSTCLI command “nas_server show” display from a Dell EMC PowerStore T?

If NAS servers are present if they are either NFS or Licensed

Memory utilization and thread count for NFS NAS servers

If NAS servers are present and if they are either Started or Degraded

SIDs of SMB NAS servers joined to the AD Domain

7. Which component is only replaceable by qualified personnel?

Battery backup unit

Embedded I/O module

Memory module

4-Port mezzanine card

8. A Storage Administrator notices a Critical alert present in Dell EMC PowerStore Manager relating to data integrity.

What action within the alert details slide-out panel is helpful in troubleshooting the problem?

Select the Gather Support Materials from Service and Support

Access the Repair Flow link to schedule a support engagement

Examine Notifications to obtain a list of corrective actions

Re-engage support through previous listed Related Events

9. DRAG DROP

Order the NDU operational steps.

10. What is a step in configuring the ToR data switches for a Dell EMC PowerStore X?

Configure a port for the discovery laptop

Create VLANs for NAS servers

Create node A port-channel

Configure LACP uplink to management switch

Page 2 of 3

11. Refer to the exhibit.

What type of cable is used for the ToR switch configuration shown for the S5248F-ON switches?

10 GigE Cat 6 Ethernet RJ-45

25 GigE Twinax

100 GigE QSFP28

10 GigE SFP optical cable

12. What describes Dell EMC PowerStore heat dissipation?

X systems have higher heat dissipation specifics than T systems

Higher model numbered systems have lower heat dissipation specifications than lower model numbered systems

T systems have higher heat dissipation specifics than X systems

Lower model numbered systems have lower heat dissipation specifications than higher model numbered systems

13. What guidance must to be considered for Service LAN port access of a Dell EMC PowerStore appliance?

Always connect multiple appliances to the same hub or switch

Never connect multiple appliances to the same hub or switch

Never connect the Service laptop directly to the appliance Service LAN port

Always removed the management port connections on the appliance

14. A Storage Administrator needs to connect through SSH to run svc commands.

How is the SSH session configured?

Appliance IP address using port 22

NAS server IP address using port 26

NAS server IP address using port 22

Appliance IP address using port 26

15. How many fan module failures can a node tolerate?

16. What describes the SAS cabling when adding an expansion enclosure to a Dell EMC PowerStore, for each node and expansion enclosure side?

SAS cabling goes from existing A ports to new ports. At the last enclosure, SAS cabling returns from the A ports to the originating node’s B ports

SAS cabling goes from existing A ports to new ports. At the last enclosure, SAS cabling returns from the A ports to the alternate node’s ports

SAS cabling goes from existing ports to new A ports. At the last enclosure, SAS cabling returns from the ports to the alternate node’s A ports

SAS cabling goes from existing ports to new A ports. At the last enclosure, SAS cabling returns from the ports to the originating node’s A ports

17. A Storage Administrator needs to address specific fixes within their Dell EMC PowerStore system.

Which NDU software upgrade option is used for this situation?

Hotfixes

vCenter

Drive firmware

Software releases

18. Which component is a CRU?

Base enclosure

Expansion enclosure

Battery Backup Unit

Nodes

19. When planning for a Dell EMC PowerStore T implementation, how many IP addresses are required for the storage network?

20. Refer to the exhibit.

A Storage Administrator is troubleshooting a Dell EMC PowerStore T hardware issue. They observe that the base enclosure LED circled is blue.

What does this indicate?

Base enclosure hardware is operating normally

Base enclosure has a component hardware fault

Cluster has only a single appliance

Appliance has a node in service mode

Page 3 of 3

21. While on-site installing a Dell EMC PowerStore system, the node A and embedded module fault LEDs are alternating blue and amber (blue for 3 seconds).

What does this indicate?

The system is booting

Nodes are in service mode

The system is not initialized

Nodes are in degraded mode

22. What is a step in configuring the ToR data switches for a Dell EMC PowerStore T?

Configure a port for the discovery laptop

Create VLANs for NAS servers

Create VLAN for vMotion networks

Configure ports for management on native VLAN

23. How can the PUHC health check results be viewed?

By accessing the Swagger UI

From syslog server

In Details of Appliances and Nodes

From management DB

24. Which Dell EMC PowerStore network uses an appliance backplane?

ICD

MPIO

Inter-node

Inter-cluster management

25. What is the protocol used for the storage network?

NFS

SMB

iSCSI

26. When a Dell EMC PowerStore node powers up in service mode, what are the commands and sequence used from the appliance SSH client to restore the node back to normal?

svc_rescue_state clear svc_node reboot

svc_node restart svc_rescue_state start

svc_rescue_state normal svc_node start

svc_node shutdown svc_rescue_state clear

27. While on-site installing a Dell EMC PowerStore T system, the node A embedded module management Ethernet port link LED is off.

What does this indicate?

Network connection is established

No network connection is established

Port speed is 1 GB/s

Port speed is 10 GB/s

28. Refer to the exhibit.

What is indicated when the circled LED on an expansion enclosure is illuminated amber?

Expansion enclosure faulted

SAS bus link up

SAS bus link down

Expansion enclosure power-on

29. What describes the power requirements for Dell EMC PowerStore?

Lower model numbered systems require less AC line current than higher model numbered systems

T models require less total power than X models

X models require less total power than T models

Lower model numbered systems require less input voltage (VAC) than higher model numbered systems

DES-1241 Specialist – Platform Engineer, PowerStore Questions

DES-1241 Specialist – Platform Engineer, PowerStore Questions

Share this post

Leave a Reply Cancel reply

Related Posts