Free D-PDD-DY-23 Exam Online Dumps - Dell PowerProtect DD Deploy 2023 - Free Latest Dumps for IT Certification Exams

Free D-PDD-DY-23 Exam Online Dumps – Dell PowerProtect DD Deploy 2023

dumps2024-02-06T14:49:53+08:00

D-PDD-DY-23 exam is one for Dell PowerProtect DD Deploy 2023 certification. Real D-PDD-DY-23 exam contains two parts: part 1 exam contains 41 questions, and you have 75 minutes to answer all the questions. The required passing score for D-PDD-DY-23 exam is 63%. Part 2 contains 9 simulations, and you have 45 minutes to complete the test. The required passing score for part 2 is 66%. You need to pass both parts to pass this D-PDD-DY-23 exam. Our D-PDD-DY-23 exam online dumps are your best choice to pass. Free Dell PowerProtect DD Deploy 2023 D-PDD-DY-23 exam online dumps are available below.

Page 1 of 5

1. A backup administrator is tasked with verifying the compression savings of a PowerProtect DD9900.

Which compression algorithm will they see enabled by default?

lzw

gzfast

2. During a normal workday an administrator notices poor performance (<1MB/s) in combination with poor global compression rate (<1x).

What metrics should be monitored to find the issue?

Cleaning, NVRAM battery level, and link utilization

Stream count, CPU utilization, and replication

Stream count, disk reconstruction, and replication

NVRAM battery level, link utilization, and disk reconstruction

3. Which backup application can back up data to a PowerProtect DD system using DD Boost over FC?

Dell NetWorker

Dell Avamar

IBM Spectrum Protect

Veritas Backup Exec

4. What system role is required to create the second security officer for a PowerProtect DD?

admin

sysadmin

limited-admin

security officer

5. A customer needs a backup system to locally protect 200 TB of mission-critical, post-comp data.

What should be used to back up the system?

Cloud Tier

DDVE

DD6900

DD3300

DD6400

6. If PowerProtect DD administrator issue a cifs share destroy command, what is the result?

The CIFS share and contents of the share are deleted.

The contents of the CIFS share are deleted.

The CIFS share is deleted.

7. An organization uses tape libraries in their current backup infrastructure. They have purchased a PowerProtect DD system and plan to use VTL to move from tape.

What is a consideration when configuring the tape size?

Target single drives to write multiple streams

Target multiple drives to write single stream

Set retention periods for as long as possible

Use smaller tapes for smaller datasets

8. What capabilities are enabled with Retention Lock Governance?

Update or extend retention File level retention policies Rename MTree Audit Logging

Rename MTree File level retention policies Secure Clock CLI Support Update or extend retention

File level retention policies Rename MTree Update or extend retention CLI Support

Audit Logging Update or extend retention File level retention policies Rename MTree Secure Clock

9. An administrator is configuring an Azure cloud unit on their DD6900.

Which certificate must be imported before adding the cloud unit?

GlobalSign Root R2

GlobalSign Root R1

S3 Flexible

Baltimore CyberTrust Root CA

10. What is the default listen port used by PowerProtect DD systems for replication?

623

2051

135

9020

Page 2 of 5

11. A technician is upgrading a DD9400 with a DS60 expansion shelf with 60 drives. In the GUI interface, only 30 drives are accessible.

What is causing these drives to be inaccessible?

There are not enough cache drives on the DD9400 to support the extra capacity.

A second SAS connection from DD9400 to DS60 is not activated.

There are not enough spare drives.

The capacity license applied is only for 30 drives.

12. Which PowerProtect DD feature protects data from accidental or malicious deletion during its retention time?

Smart Scale

Retention Lock

Data Invulnerability Architecture

Encryption

13. What is the maximum capacity for an on-premises DDVE with no cloud storage?

64 TB

96 TB

128 TB

256 TB

14. What are the steps to configure the Retention Lock Compliance?

15. A customer has stored the data that is in the cloud using PowerProtect DD. For security reasons, encryption will be applied to the data.

What is the required action to achieve the customer's goal?

Encrypt and reupload the data

Enable the encryption via cloud tier level

Activate the Data at Rest encryption

Turn off encryption and reenable

16. A systems administrator wants to change encryption.

Which user role is needed to log in, and what command must be run to enable the security policy?

security officer user and run authentication policy set security-officer enabled

sysadmin user and run authentication policy set security-officer enabled

security officer user and run authorization policy set security-officer enabled

sysadmin user and run authorization policy set security-officer enabled

17. What happens to the data when it is moved from the active tier to cloud tier?

It is deduplicated and stored in object storage the native format

It is compressed and stored as object storage in a new format

It is compressed and stored in block storage in a new format

It is deduplicated and stored in a file system in the native format

18. A company has DD Retention Lock Compliance enabled on an MTree. The file system is disabled due to tampering of the system clock.

Which user role has the privilege required to enable the file system?

Security Officer

Admin

Limited Admin

Tenant Admin

19. A PowerProtect DD appliance with two expansion shelves is being installed in a customer-provided rack.

When cabling the controller to the shelves, what is connected to the host port on the last shelf in the chain?

Expansion port of the upstream shelf

Host port of the controller

Expansion port of the controller

Host port of the downstream shelf

20. What is the result of using the filesys clean skip schedule estimate-percent-used 30 days 10 command?

Cleaning is run every 10 days when the system is over 30% capacity.

Cleaning is run every 10 days using no more than 30% system resources.

Cleaning is run every 10 days using more than 30% system resources.

Cleaning is run every 10 days when the system is under 30% capacity.

Page 3 of 5

21. Which deduplication steps are offloaded when DSP is used?

Compress, Segment, and Filter

Segment, Fingerprint, and Compress

Fingerprint, Segment, and Filter

Filter, Fingerprint, and Segment

22. A backup administrator has enabled the Retention Lock feature on their PowerProtect DD appliance. Over time, the administrator noticed an increase in file system utilization.

Upon further investigation, the administrator discovered expired files are still present on the appliance.

What is the most likely reason for this issue?

The time of the file was set below the minimum retention period

Retention Lock feature was disabled before the expiration date

File system cleaning was disabled

Backup application failed to delete the file after expiration

23. In PowerProtect DD, in which folder are core files, logfiles, and upgrade packages located?

/backup

/ddvar

/data/col1

/var

24. Which component of PowerProtect DD is Data Invulnerability Architecture a feature of?

VTL

DDOS

DD Boost

CIFS

25. What is a requirement to use the PowerProtect DD HA feature?

Each head unit requires its own FS25 shelf

Head units and nodes require an active/active configuration

A single set of shared storage

Dual set of shared storage configuration

26. Which type of data replication can only be used with DD Boost on a PowerProtect DD appliance?

Collection

MTree

Encrypted replication

Managed File

27. When using the DD VTL Tape Out to Cloud feature, which status will the tape report on the backup server once the tape is ready for long-term retention?

Offsite

Archived

Mountable

Nonmountable

28. An engineer is deploying a PowerProtect DD6900 system. The installation includes ES40, and DS60 expansion shelves on the same chain.

What consideration should be made when configuring the hardware?

The maximum number of ES40 shelves is four

The maximum number of DS60 shelves is five

The maximum number of ES40 shelves is six

The maximum number of DS60 shelves is six

29. What would the log view command display if no log name is specified?

space.log

audit.log

debug/ddfs.info

messages

30. An engineer is deploying a new PowerProtect DD9900 system that includes ES40, DS60, and FS25 expansion shelves.

What should the engineer consider when cabling the hardware?

The FS25 shelf should be cabled on a separate chain

The DS60 shelf should be cabled on a separate chain

The FS25 shelf must be fully populated

The DS60 shelf must be populated with identical drives

Page 4 of 5

31. Which is required to store and manage archive data on a single PowerProtect DD appliance to comply with regulatory standards?

Dell EMC Cloud Tier

Encryption for Data at Rest

Retention Lock Governance

Retention Lock Compliance

32. A customer needs a backup system to protect 100 TB of mission-critical data.

What should be used to back up the system?

cloud tier

DD6900

DD3300

DDVE

33. A Power Protect DD system is configured for VTL. The backup application requires a minimum tape capacity of 800 GB.

What is the minimum tape type to support this requirement?

LTO-5

LTO-3

LTO-2

LTO-4

34. An organization uses tape libraries in their current backup infrastructure. They have purchased a PowerProtect DD system and plan to use VTL to move from physical tape.

What is a consideration when configuring the tape size?

Use multiple drives to write multiple streams

Set retention periods for as long as possible

Target multiple drives to write single stream

Use larger tapes for multiple smaller datasets

35. Which command allows a system administrator to monitor clients active in the past 15 minutes?

nfs show stats

nfs show clients

nfs show detailed-stats

nfs show active

36. A PowerProtect DD appliance has been installed at a company’s location for several months and has reached a steady state.

As a best practice, at what percentage of disk utilization should action be taken?

60%

70%

80%

95%

37. Which command is used to start the initial CLI configuration wizard?

config setup

install config

config

setup

38. When accessing an NFS share from a PowerProtect DD appliance, what is the maximum Mount Limit value for restore instances recommended by IBM Spectrum Protect?

512

1024

2048

4096

39. What is the maximum capacity for a DDVE?

64 TB

96 TB

128 TB

256 TB

40. Refer to the exhibit.

Match each action to its call-out location. Select and Place:

Page 5 of 5

41. When selecting a PowerProtect DD model, which standard practices should be used to conservatively calculate capacity and throughput?

Capacity: First full backup + First incremental backup + (Weekly cycle * Number of weeks data is retained) Throughput: Size of average backup / Backup window time Allow for a minimum 20% buffer in both capacity and throughput

Capacity: First full backup + Incremental backups + (Weekly cycle * Number of weeks data is retained) Throughput: Size of largest backup / Backup window time Allow for a minimum 10% buffer in both capacity and throughput

Capacity: First full backup + Incremental backups + (Weekly cycle * Number of weeks data is retained) Throughput: Size of largest backup / Backup window time Allow for a minimum 20% buffer in both capacity and throughput

42. When using CIFS from a PowerProtect DD system, what should be changed on a Windows machine?

SMBTimeout to 7200 seconds

CIFSTimeout to 3600 seconds

SESSTIMEOUT to 7200 seconds

SESSTIMEOUT to 3600 seconds

43. A backup administrator is tasked with monitoring PowerProtect DD capacity metrics. The administrator is backing up 2 TB of data daily with a reduction rate at 5x. After data reduction, subsequent full backups compress down to 100 GB.

The initial backup requires 400 GB with a 10 percent increase in the data each day. Each incremental backup is 200 GB. After data reduction, each incremental backup is 20 GB.

What is the weekly burn rate (GB) after four daily incremental backups and one weekly backup?

180

200

400

440

44. What are some possible network bottlenecks for a PowerProtect DD?

Configuration, wire speeds, switches and routers

Connectivity, routing protocols, and configuration

Connectivity, firewalls, and routing protocols

Routing protocols, switches and routers, and wire speeds

45. An administrator has observed degraded read and write throughput performance with their CIFS share.

What can the administrator disable to address the issue?

Server Signing

Restrict anonymous connection

TCP window size

Log level

Free D-PDD-DY-23 Exam Online Dumps – Dell PowerProtect DD Deploy 2023

Free D-PDD-DY-23 Exam Online Dumps – Dell PowerProtect DD Deploy 2023

Share this post

Leave a Reply Cancel reply

Related Posts