Fortinet NSE5_FAZ-7.0 Exam Dumps - Better Preparation Materials For Learning - Free Latest Dumps for IT Certification Exams

Fortinet NSE5_FAZ-7.0 Exam Dumps – Better Preparation Materials For Learning

dumps2022-10-18T08:36:50+08:00

dumps Fortinet Fortinet NSE 5 – FortiAnalyzer 7.0, NSE5_FAZ-7.0, NSE5_FAZ-7.0 demo, NSE5_FAZ-7.0 dumps, NSE5_FAZ-7.0 exam dumps 0 Comments

New NSE5_FAZ-7.0 Fortinet NSE 5 – FortiAnalyzer 7.0 exam is available online to test applied knowledge of FortiAnalyzer configuration, operation, and day-to-day administration, and includes operational scenarios, system configuration, device registration, and troubleshooting. There are 35 multiple-choice questions in actual NSE5_FAZ-7.0 exam. You will have 60 minutes to answer this exam completely. Preparation is needed, you can have the Fortinet NSE5_FAZ-7.0 exam dumps for better practice. Try to read NSE5_FAZ-7.0 free demo below.

Page 1 of 3

1. Which log type does the FortiAnalyzer indicators of compromise feature use to identify infected hosts?

Antivirus logs

Web filter logs

IPS logs

Application control logs

2. The admin administrator is failing to register a FortiClient EMS on the FortiAnalyzer device.

What can be the reason for this failure?

FortiAnalyzer is in an HA cluster.

ADOM mode should be set to advanced, in order to register the FortiClient EMS device.

ADOMs are not enabled on FortiAnalyzer.

A separate license is required on FortiAnalyzer in order to register the FortiClient EMS device.

3. Which two statements are true regarding FortiAnalyzer operating modes? (Choose two.)

When in collector mode, FortiAnalyzer collects logs from multiple devices and forwards these logs in the original binary format.

Collector mode is the default operating mode.

When in collector mode. FortiAnalyzer supports event management and reporting features.

By deploying different FortiAnalyzer devices with collector and analyzer mode in a network, you can improve the overall performance of log receiving, analysis, and reporting

4. Which two settings must you configure on FortiAnalyzer to allow non-local administrators to authenticate to FortiAnalyzer with any user account in a single LDAP group? (Choose two.)

A local wildcard administrator account

A remote LDAP server

A trusted host profile that restricts access to the LDAP group

An administrator group

5. If you upgrade the FortiAnalyzer firmware, which report element can be affected?

Custom datasets

Report scheduling

Report settings

Output profiles

6. If you upgrade your FortiAnalyzer firmware, what report elements can be affected?

Output profiles

Report settings

Report scheduling

Custom datasets

7. What must you configure on FortiAnalyzer to upload a FortiAnalyzer report to a supported external server? (Choose two.)

SFTP, FTP, or SCP server

Mail server

Output profile

Report scheduling

8. Which two statements express the advantages of grouping similar reports? (Choose two.)

Improve report completion time.

Conserve disk space on FortiAnalyzer by grouping multiple similar reports.

Reduce the number of hcache tables and improve auto-hcache completion time.

Provides a better summary of reports.

9. What purposes does the auto-cache setting on reports serve? (Choose two.)

To reduce report generation time

To automatically update the hcache when new logs arrive

To reduce the log insert lag rate

To provide diagnostics on report generation time

10. What are two of the key features of FortiAnalyzer? (Choose two.)

Centralized log repository

Cloud-based management

Reports

Virtual domains (VDOMs)

Page 2 of 3

11. What is the purpose of employing RAID with FortiAnalyzer?

To introduce redundancy to your log data

To provide data separation between ADOMs

To separate analytical and archive data

To back up your logs

12. An administrator has moved FortiGate A from the root ADOM to ADOM 1. However, the administrator is not able to generate reports for FortiGate A in ADOM 1.

What should the administrator do to solve this issue?

Use the execute sql-local rebuild-db command to rebuild all ADOM databases.

Use the execute sql-local rebuild-adom ADOM1 command to rebuild the ADOM database.

Use the execute sql-report run ADOM1 command to run a report.

Use the execute sql-local rebuild-adom root command to rebuild the ADOM database.

13. If the primary FortiAnalyzer in an HA cluster fails, how is the new primary elected?

The configured IP address is checked first.

The active port number is checked first.

The firmware version is checked first.

The configured priority is checked first

14. Which statements are correct regarding FortiAnalyzer reports? (Choose two)

FortiAnalyzer provides the ability to create custom reports.

FortiAnalyzer glows you to schedule reports to run.

FortiAnalyzer includes pre-defined reports only.

FortiAnalyzer allows reporting for FortiGate devices only.

15. Refer to the exhibit.

Which two statements are true regarding enabling auto-cache on FortiAnalyzer? (Choose two.)

Report size will be optimized to conserve disk space on FortiAnalyzer.

Reports will be cached in the memory.

This feature is automatically enabled for scheduled reports.

Enabling auto-cache reduces report generation time for reports that require a long time to assemble datasets.

16. Refer to the exhibits.

How many events will be added to the incident created after running this playbook?

Ten events will be added.

No events will be added.

Five events will be added.

Thirteen events will be added.

17. Which statements are true regarding securing communications between FortiAnalyzer and FortiGate with IPsec? (Choose two.)

Must configure the FortiAnalyzer end of the tunnel only--the FortiGate end is auto-negotiated.

Must establish an IPsec tunnel ID and pre-shared key.

IPsec cannot be enabled if SSL is enabled as well.

IPsec is only enabled through the CLI on FortiAnalyzer.

18. Refer to the exhibit.

What is the purpose of using the Chart Builder feature on FortiAnalyzer?

In Log View, this feature allows you to build a dataset and chart automatically, based on the filtered search results.

In Log View, this feature allows you to build a chart and chart automatically, on the top 100 log entries.

This feature allows you to build a chart under FortiView.

You can add charts to generated reports using this feature.

19. Which daemon is responsible for enforcing raw log file size?

logfiled

oftpd

sqlplugind

miglogd

20. Logs are being deleted from one of the ADOMs earlier than the configured setting for archiving in the data policy.

What is the most likely problem?

CPU resources are too high

Logs in that ADOM are being forwarded, in real-time, to another FortiAnalyzer device

The total disk space is insufficient and you need to add other disk

The ADOM disk quota is set too low, based on log rates

Page 3 of 3

21. Why should you use an NTP server on FortiAnalyzer and all registered devices that log into FortiAnalyzer?

To properly correlate logs

To use real-time forwarding

To resolve host names

To improve DNS response times

22. After you have moved a registered logging device out of one ADOM and into a new ADOM, what is the purpose of running the following CLI command?

execute sql-local rebuild-adom <new-ADOM-name>

To reset the disk quota enforcement to default

To remove the analytics logs of the device from the old database

To migrate the archive logs to the new ADOM

To populate the new ADOM with analytical logs for the moved device, so you can run reports

23. In order for FortiAnalyzer to collect logs from a FortiGate device, what configuration is required? (Choose two.)

Remote logging must be enabled on FortiGate

Log encryption must be enabled

ADOMs must be enabled

FortiGate must be registered with FortiAnalyzer

24. What can you do on FortiAnalyzer to restrict administrative access from specific locations?

Configure trusted hosts for that administrator.

Enable geo-location services on accessible interface.

Configure two-factor authentication with a remote RADIUS server.

Configure an ADOM for respective location.

25. What does the disk status Degraded mean for RAID management?

One or more drives are missing from the FortiAnalyzer unit. The drive is no longer available to the operating system.

The FortiAnalyzer device is writing to all the hard drives on the device in order to make the array fault tolerant.

The FortiAnalyzer device is writing data to a newly added hard drive in order to restore the hard drive to an optimal state.

The hard driveiIs no longer being used by the RAID controller

26. What can the CLI command # diagnose test application oftpd 3 help you to determine?

What devices and IP addresses are connecting to FortiAnalyzer

What logs, if any, are reaching FortiAnalyzer

What ADOMs are enabled and configured

What devices are registered and unregistered

27. For which two purposes would you use the command set log checksum? (Choose two.)

To help protect against man-in-the-middle attacks during log upload from FortiAnalyzer to an SFTP server

To prevent log modification or tampering

To encrypt log communications

To send an identical set of logs to a second logging server

28. An administrator has configured the following settings:

config system fortiview settings

set resolve-ip enable

end

What is the significance of executing this command?

Use this command only if the source IP addresses are not resolved on FortiGate.

It resolves the source and destination IP addresses to a hostname in FortiView on FortiAnalyzer.

You must configure local DNS servers on FortiGate for this command to resolve IP addresses on Forti Analyzer.

It resolves the destination IP address to a hostname in FortiView on FortiAnalyzer.

Fortinet NSE5_FAZ-7.0 Exam Dumps – Better Preparation Materials For Learning

Fortinet NSE5_FAZ-7.0 Exam Dumps – Better Preparation Materials For Learning

Share this post

Leave a Reply Cancel reply

Related Posts