Free Online Dumps for You to Take JNCIA-DC JN0-280 Exam

dumps2024-04-16T09:19:20+08:00

Passing the Juniper JN0-280 exam is a required test for earning JNCIA-DC certification. Understanding the JN0-280 exam structure is the first step for you to study. There are 65 multiple-choice questions in the real Juniper JN0-280 exam, and you have 90 minutes to answer all the questions. The available language is English. JNCIA-DC certification is valid for 3 years. Besides, our new cracked JN0-280 exam dumps can guarantee you pass the test easily. With them, you will not waste your registration fee. Free JNCIA-DC JN0-280 exam online dumps are below.

Page 1 of 4

1. Which of the following is an important consideration when configuring BFD?

Setting a very high multiplier to avoid false positives

Using the same BFD interval on all devices in the network

Adjusting the BFD interval and multiplier according to network needs

Disabling all other failure detection mechanisms

2. In the context of Layer 2 switching, what does RSTP stand for?

Rapid Spanning Tree Protocol

Routing Switch Transport Protocol

Redundant Switching Tree Protocol

Resilient Switching Transport Protocol

3. What is the default route preference for a static route on a Junos device?

130

4. Which statement is correct about a five-stage IP fabric topology?

There is a maximum of five hops between any end-devices

They are commonly referred to as interconnected data centers

There is a maximum of three hops between any end-devices

They are typically deployed in small to medium data centers

5. What is the primary purpose of using aggregate routes in a network?

To dynamically adjust to network changes

To summarize and reduce the number of routes in the routing table

To filter unwanted traffic

To statically define a route to a specific destination

6. In the context of data center networking, what is the primary purpose of an Underlay Network?

To provide a physical infrastructure for an Overlay Network.

To handle external network connections exclusively.

To facilitate virtual machine migrations.

To encrypt data traffic between servers.

7. What is the primary difference between IBGP and EBGP?

The way they advertise routes

The administrative distance

The use of AS_PATH attribute

The requirement for a full mesh topology

8. What is an advantage of using BFD?

BFD is so lightweight that each protocol will generate its own unique BFD session by default, to replace its own hello messages.

BFD built to handle the routing table of the entire Internet, and can safely redistribute it into OSP

One BFD monitoring session can be used by multiple protocols.

BFD is built to handle the routing table of the entire Internet, unlike IGP

9. Bidirectional Forwarding Detection (BFD) is primarily used for:

Encrypting data packets

Detecting slow links in the network

Quick failure detection in forwarding paths

Aggregating multiple links

10. What is the function of the 'Weight' attribute in BGP, and where is it used in the route selection process?

It is used to prioritize routes received from different EBGP peers and is considered before the AS_PATH attribute.

It determines the stability of a route and is checked after the Local Preference attribute.

It is a Cisco-specific attribute used to prefer paths from one BGP speaker over another, evaluated before the Local Preference.

It is used to balance load among multiple links and is considered after the MED attribute.

Page 2 of 4

11. VLANs help in reducing which of the following? (Choose two)

Collision domains

Broadcast domains

Routing complexity

Encryption requirements

12. In the Junos OS, what is the default behavior of a switch when it receives a frame with an unknown destination MAC address?

It discards the frame.

It floods the frame out of all ports except the one it was received on.

It sends the frame to its default gateway.

It buffers the frame until the MAC address can be learned.

13. Which of the following BGP attributes is considered first in the route selection process?

Local Preference

AS Path Length

Origin

MED

14. When troubleshooting issues with static routes, what is a key factor to check first?

If the routing table has enough memory

The correctness of the specified next-hop addresses

The speed of the router's CPU

The number of aggregate routes configured

15. What is the main advantage of using an Overlay Network in a data center?

It simplifies physical network design by allowing multiple virtual topologies over it.

It replaces the need for physical network infrastructure.

It offers higher physical bandwidth capacity.

It provides direct Internet access to applications.

16. What are the different OSPF area types? (Choose two)

Stub Area

Not-So-Stubby Area (NSSA)

Default-Free Zone

Virtual Link Area

17. In OSPF, what is the function of the Link-State Database (LSDB)?

To store OSPF routing tables.

To maintain a list of OSPF neighbors.

To keep the topology structure of the network.

To log changes in network topology.

18. What are two characteristics of a typical EBGP underlay fabric? (Choose two.)

Each device in an EBGP fabric will be configured in its own unique private A

Each device in an EBGP fabric will be configured to be part of the same private A

An EBGP fabric relies on an IGP to advertise loopback IPs.

An EBGP fabric does not require an IGP to advertise loopback IPs.

19. Referring to the exhibit, how many broadcast domains are present in the topology?

20. How can OSPF be configured to prefer one route over another?

By setting a higher cost on the preferred route.

By configuring route redistribution.

By adjusting interface bandwidth.

By setting a lower cost on the preferred route.

Page 3 of 4

21. In the context of protocol-independent routing, what is the main difference between static and generated routes?

Static routes require manual configuration, while generated routes are created dynamically.

Static routes are used for load balancing, while generated routes are not.

Generated routes support summarization, while static routes do not.

Generated routes are manually configured, while static routes are automatically created.

22. Which LSA types are associated with OSPF? (Choose three)

Router LSA (Type 1)

Network LSA (Type 2)

Summary LSA (Type 3)

External LSA (Type 5)

23. Referring to the exhibit, which statement is correct?

The ge-0/0/0 interface has been explicitly assigned to a VLAN named default.

The default VLAN is a user defined VLAN name.

The asterisk indicates that the interface is active.

The ge-0/0/12 interfaces is an access port.

24. Which of the following is a key benefit of implementing High Availability (HA) in a network?

Reduced network security

Increased network downtime

Enhanced data redundancy

Slower data recovery

25. In OSPF, which command is commonly used to monitor neighbor relationships?

show ip ospf neighbors

show ospf database

show ip route ospf

show ospf interfaces

26. What protocol and port does BGP use for control plane communication?

protocol TCP, port 179

protocol UDP, port 179

protocol TCP, port 159

protocol UDP, port 159

27. Referring to the exhibit, how many milliseconds will pass before the BGP neighbor is considered dead?

1000ms

9000ms

2000ms

3000ms

28. What is the purpose of using route reflectors in BGP?

To encrypt BGP messages

To reduce the number of required IBGP sessions in a network

To increase the speed of BGP convergence

To automatically select the best route

29. What does the “qualified-next-hop” feature do when configuring a static route?

It allows you to specify an independent route preference value for an additional next hop.

It specifies the IP address of the directly connected device.

It instructs the device to verify the next-hop is reachable before activating the route.

It instructs the device to looks up a static route’s next-hop that is not directly connected.

30. In the context of Ethernet bridging on Junos devices, what is the purpose of the Spanning Tree Protocol (STP)?

To prevent routing loops.

To provide a mechanism for VLAN tagging.

To prevent Layer 2 switching loops.

To filter MAC addresses.

Page 4 of 4

31. Which statement is correct about the OSPF link-state database?

Each router within the same area must maintain a unique copy of the link-state database.

Each router within the same area must maintain an identical copy of the link-state database.

Each router within the OSPF domain must maintain a unique copy of the link-state database.

Each router within the OSPF domain must maintain an identical copy of the link-state database.

32. In a Spine/Leaf IP-Fabric architecture, what is the primary role of the leaf switches?

To provide direct connectivity to servers.

To interconnect different data centers.

To perform deep packet inspection.

To manage the overall data center network.

33. What is the primary function of a VLAN?

To encrypt network traffic.

To provide a routing mechanism between different networks.

To segment a network into multiple broadcast domains.

To control network traffic based on MAC addresses.

34. What roles do the Designated Router (DR) and Backup Designated Router (BDR) play in OSPF?

They redistribute routes between OSPF and non-OSPF networks.

They are responsible for generating LSAs for external routes.

They reduce the number of adjacencies on broadcast networks.

They determine the shortest path first algorithm.

35. Which two statements are correct about BGP? (Choose two.)

IBGP peers do not advertise routes learned from IBGP peers to other IBGP peers.

EBGP uses the AS path to avoid loops.

IBGP sessions are typically established between physical router interfaces.

EBGP sessions are typically established between router loopback interfaces.

36. Which of the following are correct about OSPF router ID selection? (Choose two)

It can be manually configured.

It is chosen based on the highest IP address of any active interface by default.

It is always the IP address of the loopback interface.

It is selected based on the lowest MAC address.

Free Online Dumps for You to Take JNCIA-DC JN0-280 Exam

Free Online Dumps for You to Take JNCIA-DC JN0-280 Exam

Share this post

Leave a Reply Cancel reply

Related Posts