Most Updated NSE5_FMG-7.0 Dumps For Fortinet NSE 5 – FortiManager 7.0 Exam Preparation - Free Latest Dumps for IT Certification Exams

Most Updated NSE5_FMG-7.0 Dumps For Fortinet NSE 5 – FortiManager 7.0 Exam Preparation

dumps2022-11-01T09:13:41+08:00

dumps Fortinet Fortinet NSE 5 – FortiManager 7.0, NSE5_FMG-7.0, NSE5_FMG-7.0 exam dumps, NSE5_FMG-7.0 exam questions, NSE5_FMG-7.0 free demo 0 Comments

Most updated NSE5_FMG-7.0 dumps are available for your Fortinet NSE 5 – FortiManager 7.0 exam preparation. Itfreedumps is one of the most reliable Fortinet NSE5_FMG-7.0 exam questions pdf providers which can help you in passing the NSE5_FMG-7.0 Fortinet NSE 5 – FortiManager 7.0 Exam with ease. Come to Itfreedumps to choose the updated NSE5_FMG-7.0 dumps for good learning. Below are the NSE5_FMG-7.0 demo questions.

Page 1 of 2

1. You are moving managed FortiGate devices from one ADOM to a new ADOM.

Which statement correctly describes the expected result?

Any pending device settings will be installed automatically

Any unused objects from a previous ADOM are moved to the new ADOM automatically

The shared policy package will not be moved to the new ADOM

Policy packages will be imported into the new ADOM automatically

2. Which two items does an FGFM keepalive message include? (Choose two.)

FortiGate uptime

FortiGate license information

FortiGate IPS version

FortiGate configuration checksum

3. Refer to the exhibit.

Which statement about the object named ALL is true?

FortiManager updated the object ALL using the FortiGate value in its database.

FortiManager installed the object ALL with the updated value.

FortiManager created the object ALL as a unique entity in its database, which can be only used by this managed FortiGate.

FortiManager updated the object ALL using the FortiManager value in its database.

4. An administrator, Trainer, who is assigned the Super_User profile, is trying to approve a workflow session that was submitted by another administrator, Student. However, Trainer is unable to approve the workflow session.

What can prevent an admin account that has Super_User rights over the device from approving a workflow session?

Trainer is not a part of workflow approval group

Trainer does not have full rights over this ADOM

Trainer must close Student’s workflow session before approving the request

Student, who submitted the workflow session, must first self-approve the request

5. View the following exhibit.

Given the configurations shown in the exhibit, what can you conclude from the installation targets in the Install On column?

The Install On column value represents successful installation on the managed devices

Policy seq#3 will be installed on all managed devices and VDOMs that are listed under Installation Targets

Policy seq#3 will be installed on the Trainer[NAT] VDOM only

Policy seq#3 will be not installed on any managed device

6. Which two settings must be configured for SD-WAN Central Management? (Choose two.)

SD-WAN must be enabled on per-ADOM basis

You can create multiple SD-WAN interfaces per VDOM

When you configure an SD-WAN, you must specify at least two member interfaces.

The first step in creating an SD-WAN using FortiManager is to create two SD-WAN firewall policies.

7. View the following exhibit.

An administrator is importing a new device to FortiManager and has selected the shown options .

What will happen if the administrator makes the changes and installs the modified policy package on this managed FortiGate?

The unused objects that are not tied to the firewall policies will be installed on FortiGate

The unused objects that are not tied to the firewall policies will remain as read-only locally on FortiGate

The unused objects that are not tied to the firewall policies locally on FortiGate will be deleted

The unused objects that are not tied to the firewall policies in policy package will be deleted from the FortiManager database

8. An administrator with the Super_User profile is unable to log in to FortiManager because of an authentication failure message.

Which troubleshooting step should you take to resolve the issue?

Make sure FortiManager Access is enabled in the administrator profile

Make sure Offline Mode is disabled

Make sure the administrator IP address is part of the trusted hosts.

Make sure ADOMs are enabled and the administrator has access to the Global ADOM

9. View the following exhibit.

Which statement is true regarding this failed installation log?

Policy ID 2 is installed without a source address

Policy ID 2 will not be installed

Policy ID 2 is installed in disabled state

Policy ID 2 is installed without a source device

10. Which two statements about the scheduled backup of FortiManager are true? (Choose two.)

It does not back up firmware images saved on FortiManager.

It can be configured using the CLI and GU

It backs up all devices and the FortiGuard database.

It supports FTP, SCP, and SFT

Page 2 of 2

11. An administrator has assigned a global policy package to a new ADOM called ADOM 1.

What will happen if the administrator tries to create a new policy package in ADOM1?

When creating a new policy package, the administrator can select the option to assign the global policy package to the new policy package

When a new policy package is created, the administrator needs to reapply the global policy package to ADOM 1.

When a new policy package is created, the administrator must assign the global policy package from the global ADO

When the new policy package is created, FortiManager automatically assigns the global policy package to the new policy package.

12. View the following exhibit.

What is the purpose of setting ADOM Mode to Advanced?

The setting allows automatic updates to the policy package configuration for a managed device

The setting enables the ADOMs feature on FortiManager

This setting allows you to assign different VDOMs from the same FortiGate to different ADOMs.

The setting disables concurrent ADOM access and adds ADOM locking

13. What is the purpose of the Policy Check feature on FortiManager?

To find and provide recommendation to combine multiple separate policy packages into one common policy package

To find and merge duplicate policies in the policy package

To find and provide recommendation for optimizing policies in a policy package

To find and delete disabled firewall policies in the policy package

14. Refer to the exhibit.

Which two statements about the output are true? (Choose two.)

The latest revision history for the managed FortiGate does match with the FortiGate running configuration

Configuration changes have been installed to FortiGate and represents FortiGate configuration has been changed

The latest history for the managed FortiGate does not match with the device-level database

Configuration changes directly made on the FortiGate have been automatically updated to device-level database

15. What will happen if FortiAnalyzer features are enabled on FortiManager?

FortiManager will reboot

FortiManager will send the logging configuration to the managed devices so the managed devices will start sending logs to FortiManager

FortiManager will enable ADOMs automatically to collect logs from non-FortiGate devices

FortiManager can be used only as a logging device.

16. In the event that the primary FortiManager fails, which of the following actions must be performed to return the FortiManager HA to a working state?

Secondary device with highest priority will automatically be promoted to the primary role, and manually reconfigure all other secondary devices to point to the new primary device

Reboot one of the secondary devices to promote it automatically to the primary role, and reconfigure all other secondary devices to point to the new primary device.

Manually promote one of the secondary devices to the primary role, and reconfigure all other secondary devices to point to the new primary device.

FortiManager HA state transition is transparent to administrators and does not require any reconfiguration.

17. An administrator would like to create an SD-WAN using central management in the Training ADOM.

To create an SD-WAN using central management, which two steps must be completed? (Choose two.)

Specify a gateway address when you create a default SD-WAN static route

Enable SD-WAN central management in the Training ADOM

Configure and install the SD-WAN firewall policy and SD-WAN static route before installing the SD-WAN template settings

Remove all the interface references such as routes or policies that will be a part of SD-WAN member interfaces

Most Updated NSE5_FMG-7.0 Dumps For Fortinet NSE 5 – FortiManager 7.0 Exam Preparation

Most Updated NSE5_FMG-7.0 Dumps For Fortinet NSE 5 – FortiManager 7.0 Exam Preparation

Share this post

Leave a Reply Cancel reply

Related Posts