Online Microsoft Dynamics 365 MB-335 Exam Dumps Help You Test Skills

1. Topic.1 Fabrikam inc sanitation cleaning solutions



Background

Fabrikam Inc. is a manufacturer of sanitation cleaning solutions and equipment including carpet/floor cleaners, pressure washers, scrubbers and vacuums.

Fabrikam Inc. is a single legal entity based in New York city.



_ Current environment

Products manufactured

• Cleaning equipment o floor cleaner

o pressure washers o scrubbers

o vacuums

• Liquid cleaning solutions o No scent

o Orange scent (subcontracted to a vendor named VendorA)

o Pine scent (subcontracted to a vendor named VendorA)



The production quantity for the finished unscented liquid cleaning solution is 40-liters. IngredientC 'or unscented liquid cleaning solution Is stored in inventory in 50-liter barrels and allocated in 50-liter increments. Two barrels of IngredientC are uses to produce a barrel of unscented liquid cleaning solution.



Production sites

• The Eastern United States facility manufactures equipment.

• The Western United States facility manufactures liquid cleaning solutions.

• Raw materials and finished products are stocked at the warehouse and distributed from the warehouse.



Warehouse facilities

The warehouse consists of the following zones:







_ Requirements

Cleaning equipment manufacturing

You identify the following require merits for manufacturing cleaning equipment:

• Production is Make to Stock and must be scheduled at an operational level.

• Machine equipment is produced on an assembly line. Scheduling must be based on production orders.

• Finished products must be packaged and shipped directly from the warehouse.

• To reduce delivery times and excess inventory, equipment must be produced as needed.

• The ability to schedule production must be based on resource capacity and the availability of required materials.

• Production order operations must be scheduled to start only when capacity and materials are available at the same time and in the required quantities.



Liquid cleaning solution manufacturing

• Production is Make lo Order and is scheduled at the job level. Products must be manufactured in batches.

• Finished products must be packaged and shipped directly from the warehouse.

• You must be able to calculate the estimated consumption of ingredients and ensure that the

amount is divisible by the number of units the raw material «s available.

• Formula changes must be reviewed and approved. You must ensure that approved formulas cannot be deleted or edited. Approved formulas may be deactivated.

• An ingredient used to manufacture unscented cleaning solution is defined as a restricted product. You must be able to automatically print a product safety data sheet (PSDS) with the packing slip for any order that includes unscented cleaning solution.

• Production must be scheduled to start by date and time according to the order that is specified by the production route.

• You must implement a scheduled Kanban rule that meets the following requirements:

o Prevent overloading a work cell for scheduled Kanbans. o Visualize excess inventory in a supermarket.

o Store products in supermarkets before they are consumed or shipped.

• You must link relevant financial dimension data to the inventory transactions at each site to ensure that you can trace profit and loss figures directly to East site and West site respectively.

• You must set up production operations for sub-contracting of Pine scent and Orange scent solution to Vendor A to ensure that a purchase order is automatically created based on estimation of a production order.



Costing

• The price of raw materials used for manufacturing unscented cleaning solution must be tracked based upon commodity exchange pricing. The margin and cost multiplier must be set up for commodity traded raw material.

• You must set up cost calculation groups to ensure that indirect costs that originate in the manufacturing of finished goods are recognized and absorbed into the product cost.

• The production manager needs to set up picking list journals and BOM item consumption.



Reporting

• Production control parameters must be setup for reporting of automatic BOM and Route consumption.

• You must create reports that include information about cost records and categories for items, and calculation formulas for indirect costs.

• You must treat manufactured items as purchased items for cost roll-up purposes during BOM calculations and reporting.

• You must configure automatic route consumption in connection with the automatic running of Report as finished.



Inventory control

You must not be required to track the tot number for items when you enter inventory information into the system. Lot numbers for items must be entered when items are picked from inventory.



Issues

Users report the following issues:

• The production manager observes that items are being deducted from inventory two times on production jobs. A shop supervisor mistakenly registers the process for assembling batteries for the pressure washers to Registered as prepared. You must reschedule the process for a future date.

• Customer1 orders 20 barrels of unscented solution. The order is confirmed. Production must be scheduled to start on December 21 to meet the customer’s delivery deadline.

• User2 reports that costs for manufactured items are twice as high as expected.

• User D reports that the formula for the liquid cleaning solution sometimes changes during production. You must enforce the policies regarding formula editing for current and future use.



You need to configure costing for raw materials used to manufacture unscented cleaning solution.

Which form should you use?

2. You need to configure production control parameters for liquid cleaning solution manufacturing.

What are two possible ways to achieve this goal? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

3. HOTSPOT

You need to resolve the production manager issue.

How should you configure manufacturing execution? To answer, select the appropriate option in the answer area. NOTE: Each correct selection is worth one point.

4. HOTSPOT

You need to resolve the shop supervisor’s issue.

Which options should you use? To answer, select the appropriate option in the answer area. NOTE: Each correct selection is worth one point.

5. HOTSPOT

You need to calculate estimated consumption of ingredients for liquid cleaning solution.

What is the consumption? To answer, select the appropriate option in the answer area. NOTE: Each correct selection is worth one point.

6. You need to configure production operations for the pine and orange scent solutions.

Which three actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

7. You need to configure lot number control for inventory.

Which option should you use?

8. You need to configure the system to meet the order requirements for unscented cleaning solution.

Which three actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

9. DRAG DROP

You need to implement the scheduled Kanban requirements.

Which rules should you use? To answer, drag the appropriate rules to the correct requirements. Each rule may be used once, more than once, or not at all. You may need to drag the spirt bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

10. You need to plan scheduling for Customer1’s order of unscented solution.

What are two possible ways to achieve the goal? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

11. Topic 2, CASE STUDY 1 Manufacturing Company



General information

A manufacturing company produces custom configured-to-order motorcycles. The company plans to implement Dynamics 365 Supply Chain Management. The company contains one legal entity located in Missouri where all production and warehousing operations occur.



Customization options

The custom motorcycles have a variety of selections that can be selected in the listed order by the end customer, including the following:







Customization restrictions

The following restrictions on customizations are in place:

* Green color can only be sold with the Legend Trim.

* Orange color can be sold with the Sport or Legend Trim.

* The ML seat must be included in the Legend package.

* The MS seat must be included in the Sport package.



Manufacturing facilities

The company includes the following manufacturing groups: Assembly and Plastic Molding. The Assembly group is responsible for assembling the motorcycles with purchased and manufactured goods. The Plastic Molding group is responsible for manufacture of all plastic parts used in the assembly area.



Motorcycle manufacturing

The parts for the product assembly are picked from the warehouse and staged at the correct workstation by a warehouse operator for each production order.



Plastic manufacturing

Plastic parts are molded using dyes that create multiple parts at once. The parts are machined in the same production process to remove excess plastic and add additional holes for assembly. Excess plastic is recycled back into the feedstock of the same color plastic chips for use in the molding process.



Metal Parts

Raw metal parts are purchased fully machined but without primer or paint. The parts are subcontracted to a vendor for primer and paint based upon the color requirements.



Facility

The company has a single warehouse that supports both the assembly and plastic manufacturing areas. The warehouse consists of three aisles with 15 bins and three shelves. The facility has no Wi-Fi capacity but has hardwired terminal stations throughout the assembly production line.

Transactions are currently completed by office staff. Raw materials transfer must support capacity constraints for paint and primer.



Requirements

The company has a single warehouse that supports both the assembly and plastic manufacturing areas. The warehouse consists of three aisles with 15 bins and three shelves. The facility has no Wi-Fi capacity but has hardwired terminal stations throughout the assembly production line.

Transactions are currently completed by office staff. Raw materials transfer must support capacity constraints for paint and primer.



Sales Order

The company has the following requirements for sales orders:

* During the configuration of a sales order, invalid combinations must be prevented.

* Each configuration must create a unique bill of material (BOM) and Route based on options selected.

* Sales pricing for the sales order must be based upon options selected.

* Due to emissions regulations, the motorcycles cannot be sold to the state of California.



Motorcycle manufacturing

The company has the following requirements for motorcycle manufacturing:

* Schedule labor only at the labor pool level without machines by day

* Produce motorcycles within a scheduled day in any order.

* Record actual production labor with start/stop times.

* Record manager approval of labor entered prior to posting.

* Post actual material consumption after production is finished.



Plastic manufacture

The company has the following requirements for motorcycle manufacturing:

* Schedule both labor and machines.

* Adjust schedules by using a Gantt chart.

* Backflush standard labor by operation.

* Post actual material consumption at the start of production.

* Track and allocate costs to the excess plastic.

* Report multiple molded part numbers during the same production run.

* Determine the correct mold to use on a production order.

* Generate a batch number for each production order.



Metal Parts

The company has the following requirements for metal parts manufacturing:

* Schedule shipments to the vendor for painting.

* Receive painted parts into inventory from the vendor.

* Track vendor inventory levels.



Default

You must configure defaults for manufacturing execution production orders to meet the following requirements:

* Ensure accuracy for production order pick list posting.

* Ensure correct pick list creation.



Issues

A. In the current system, the company cannot calculate overhead rates and determine the breakdown of material, labor, machine, and overhead costs for production.

B. The company is manually calculating an 8% overhead on materials and posting a journal manually.



You need to create the constraint for the ML seat selection.

Which expression constraint should you use?

A. Implies[Trim==Legend,Seat==ML]

B. Seat!=ML

C. [Trim==Legend|Seat==ML]

D. Implies[Seat==ML,Trim==Legend]

12. You need to set up the correct production solution for the assembly are a.

Which solution should you implement?

13. HOTSPOT

You need to configure system attributes.

Which attribute types should you use? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

14. HOTSPOT

You need to modify the production order defaults for the manufacturing execution production order Start process.

What should you do? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

15. You need to set up the configuration model to price the motorcycles correctly.

What should you do?

16. DRAG DROP

You need to set up the system to calculate the overhead rates automatically for production.

Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

17. HOTSPOT

You need to configure scheduling for each production area.

Which scheduling options should you use? To answer, select the appropriate option in the answer area. NOTE: Each correct selection is worth one point.

18. HOTSPOT

You need to configure each item for plastic manufacturing.

Which production types should you use? To answer, select the appropriate option in the answer area. NOTE: Each correct selection is worth one point.

19. You need to set up the state control for sales of motorcycles.

Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

20. You need to set up the metal production route and BOM.

Which three actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

21. You need to configure the system for plastic operations.

Which two parts should be manually reported as finished? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

22. DRAG DROP

You need to create the new summer limited edition bicycle in Dynamics 365 in preparation for taking orders.

Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

23. You need to create the production orders for standard model bicycles.

Which method should you use?

24. You need to configure the bicycles’ production resource.

Which option should you use?