RCPE Certified Professional WAN Optimization 830-01 Practice Questions

dumps2022-02-11T03:48:12+08:00

RCPE Certified Professional WAN Optimization 830-01 exam practice questions can help you save much time in preparing for this 830-01 exam. After passing 830-01 exam and getting RCPE certified Professional WAN Optimization certification, you can master alignment, design, implementation and administration of WAN Optimization. Free Riverbed certification 830-01 practice questions are below.

Page 1 of 3

1. What do you need to ensure when connecting a SteelHead to a Hardware Security Module?

Access is required for both server-side and client side SteelHead appliances to the HSM

The in-path interface must be at least 10Gbps

The HSM and the in-path interfaces must share the same default gateway

The latency between the in-path interfaces and the HSM must be kept to a minimum

The latency between the auxiliary or Primary interfaces and the HSM must be kept to a minimum

2. For optimized encrypted MAPI, is the inner channel encrypted by default?

Yes, always

Only for MS Exchange 2003 and later

Yes, but this is configured on the server

3. Which report displays the rate of established SSL connections?

WAN Throughput

Traffic Summary

SSL

Current Connections

4. A customer is complaining that all optimized connections to their internal website cause a splash screen indicating an untrusted certificate. If the users click to accept the risks and add a security exception in their browsers, it all works fine.

What is a likely cause?

The proxy certificate in the server-side SteelHead appliance is not trusted by the client browser

The SteelHead Peering Certificates have expired

The proxy certificate on the client-side SteelHead appliance is not trusted by the client browser

The server-side SteelHead does not trust the server certificate

The server-side SteelHead appliance has not joined the Domain properly

5. Authentication fails for certain users after configuring the joining of the server-side SteelHead appliance to the domain as a read-only domain controller (RODC).

What is the most likely issue?

The users have local branch file servers

There is an incorrect Short Domain Name (NETBIOS name)

There’s an incorrect domain controller

These users exclusively make use of Kerberos authentication

6. You join a SteelHead appliance to a domain as Active Directory Integrated (Windows 2008 and later).

How will this appear in Active Directory?

As a Regular Domain Controller

As a Read-Only Domain Controller

As a Writable Domain Controller

As a PDC Emulator

7. You have a Windows server that negotiates SMB3 encryption with the client. If you enable SMB3 optimization, but do not configure signing on the SteelHead, will there be any latency optimization?

Yes, but you won’t have SDR/LZ

Yes, and you still have SDR/LZ

No, but will still have SDR/LZ

No, and you won’t have SDR/LZ either

8. What is the purpose of creating an account in Active Directory with Replication User privilege for the use of the SteelHeads?

It allows SteelHeads to authenticate users on behalf of the Domain Controllers

It allows SteelHeads the ability to automatically run backups to a SMB file share within a Windows Domain

It enables the SteelHead admins to authenticate with Active Directory when managing the SteelHeads

It allows the optimization of encrypted MAPI and SMB3/3 traffic using end-to-end Kerberos authentication

9. Which statement is true about NFS optimization?

NFS cannot be optimized due to its proprietary encryption mechanism

All NFS is optimized with both bandwidth and latency

NFS v2 & v4 can be optimized with bandwidth only, v3 can attain both bandwidth & latency

NFS can only be optimized using packet mode optimization

10. What does the SaaS Accelerator Manager (SAM) use to calculate the capacity of service instances in the SaaS service cluster based on the type of application?

Bandwidth

Throughput

Total Data Reduction

Number of users

Page 2 of 3

11. In which type of computing does the cloud provider provide users with the platform and environment to develop, manage, and run applications over the Internet?

IaaS

PaaS

SaaS

YaaS

12. You raise a support case at Priority 2 - High.

How soon can you expect a response from Riverbed Support?

1 hour

4 hours

8 hours

24 hours

13. Which diagnostic tool contains a copy of the historical statistics, logs, and configuration data on the system?

Traffic Summary

Process Dump

System Logs

System Dump

14. The maximum TCP option field size is __________ bytes.

15. In which of the following Transparency Modes do the Client and Server retain their own IP addressing across the WAN?

Correct Addressing

Port Transparency

Full Transparency

All of the above

16. What is the benefit of configuring Datastore Sync between SteelHeads?

It allows up to four SteelHeads in a cluster access to the same datastore

It gives high availability to the warm data patterns in exactly two SteelHeads

It allows for seamless transition when upgrading to a larger SteelHead

It allows for seamless transition from a physical to a virtual SteelHead

It allows more efficient use of references by synchronizing them end-to-end between branch and datacenter

17. Which of these are true statements?

Transparency is a global setting affecting all in-path interfaces

Transparency for SSOOP can only be achieved using the CLI and not the GUI

Port Transparency utilizes the connection pooling function, but Full Transparency cannot

Addressing is transparent to the client and server using in-path deployments, but not when using SSOOP

Transparency is a setting only relevant to cloud deployments

18. What is required for optimization to occur when deploying SteelHeads on an 802.1Q trunk?

A single IP address routable to the in-path interface of the remote SteelHead

An IP address configured on all VLANs where optimization is required

A single IP on a VLAN and all traffic set as Correct Addressing

A single IP address on the default VLAN and Simplified Routing set to none

Full Transparency as a catch-all in-path rule and Simplified Routing set to Destination Only

19. When a SteelHead is on a VLAN trunk, what is the required simplified routing setting?

Destination and Source

All

None

Destination Only

20. Which SteelHead appliance deployment mode uses the Primary interface for optimization?

Virtual in-path

Physical in-path

Serial Cluster

Server-Side Out of Path (SSOOP)

Interceptor

Page 3 of 3

21. You should use a __________ cable to the WAN0_0 interface if you are connecting to a switch interface, and a __________ cable to the WAN0_0 interface if you are connecting to a router interface.

Straight-through, Crossover

Crossover, Straight-through

Straight-through, Straight-through

Crossover, Crossover

22. What is the purpose of configuring Subnet-Side Rules?

Subnet-Side Rules are part of the Topology configuration and help with Path Selection and Secure transport

In an in-path deployment, Subnet-Side Rules mean you can disable Simplified Routing (for example, HSRP deployments)

Interceptor appliances require subnet side rules to find their LAN subnets

In Virtual in-path deployments, it tells the SteelHead appliances whether traffic originates from logical LAN or logical WAN side

23. In virtual in-path deployments, such as PBR, what is never used?

Subnet-side rules

A fake SNMP if-index

LAN interface

WAN interface

RCPE Certified Professional WAN Optimization 830-01 Practice Questions

RCPE Certified Professional WAN Optimization 830-01 Practice Questions

Share this post

Leave a Reply Cancel reply