Real Dumps for LEED Green Associate Exam - Ensure You Pass - Free Latest Dumps for IT Certification Exams

Real Dumps for LEED Green Associate Exam – Ensure You Pass

dumps2023-10-12T15:05:18+08:00

LEED Green Associate exam is one test for USGBC certification, which can open your door to new job opportunities. There are 100 multiple-choice questions in the real LEED Green Associate exam, and you have two hours to answer all the questions. The required passing score for the LEED Green Associate exam is 170 out of 200. We provide the latest LEED Green Associate exam real dumps, which can guarantee you pass. Free USGBC Certification LEED Green Associate exam real dumps are below.

Page 1 of 3

1. The project area defined by the perimeter of a building plan is referred to as the building's

shell

density

footprint

envelope

2. Which is an example of regenerative design?

Passive house energy building

A building with a recycling program

A project that uses sustainable materials

A building that generates electricity and sends the excess to the grid

3. A retail store is pursuing LEED for Interior Design and Construction certification.

Which of the following strategies should be conducted first?

Perform a life-cycle analysis

Create an energy budget analysis

Conduct a charrette with the project team

Perform an energy model according to ASHRAE 90.1

4. Open grid pavement tends to reduce

native habitat

heat island effects

rainwater infiltration

parking space requirements

5. The LEED credits given the greatest weights are credits that

are used in certifying a LEED Platinum Project

contribute to developmental density and Sustainable Sites

are included in the LEED for Buildings Operations and Maintenance: Existing Buildings rating system

most directly address the most important environmental impacts and human benefits

6. Energy and Atmosphere Credit encompasses

site selection, site design and environmental concerns

integrative process, building loads and EQ

building loads, energy performance management and EQ

building loads, energy performance management and environmental concerns

7. Which of the following is a component of the Promote Sustainable and Regenerative Material Resource Cycles impact category?

Move to Cyclical, Non-Depleting Material Cycles

Protect Human Health Globally and Across the Built Environment Life Cycle

Protection and Restoration of Water Regimes and Natural Hydrological Cycles

Greenhouse Gas (GHG) Emissions Reduction from the Embodied Energy of Materials

8. During which stage of a project is implementation of the Integrative Process most effective in improving performance?

Operation

Early de sign

Construction

Construction document

9. Light colored paving and cool roofs are terms referring to materials with

lower emissivity and lower albedo

lower emissivity and higher albedo

higher emissivity and lower albedo

higher emissivity and higher albedo

10. Which of the following benefits could result from achieving LEED certification for a building?

Preferred public parking

Increased waste to landfills

Qualification for tax rebates

Dedicated public transportation infrastructure

Page 2 of 3

11. Which permanently installed building products are addressed in the Materials and Resources Credit category calculation?

Framing

Elevators

Process equipment

Formwork for concrete

12. Which of the following project characteristics demonstrate smart growth principles?

The project is built on a former chemical landfill site

The project consists of a sprawling new housing complex 5 mi. (8 km) from the nearest city

The project consists of two adult care facilities, three senior center facilities and one nursing home

The project protects open space and farmland by building housing and offering transportation choices near jobs, shops and schools

13. Which impact categories have been identified as most important for a LEED project to accomplish?

Increase return on investment, promote human scale development

Protect biodiversity and ecosystem services, improve business efficiency

Reduce contribution to climate change, enhance human health and well-being

Increase return on investment, promote sustainable and regenerative material cycles

14. Which of the following strategies encourages a building's users to use alternative transportation?

Locate building in a rural area

Provide bicycle storage and shower facilities

Locate building near restaurants and theaters

Provide preferred parking for business owners

15. What is the current standard LEED uses to determine the baseline for indoor water savings?

Energy Policy Act (EPACT) of 1992. 2005

ANSI 17024

The local standard in which the project is located

The Energy Savings and Industrial Competitiveness Act of 2013

16. What unit is green power purchased in?

Kilowatt-hour (kWh)

British thermal units (BTUs]

Dollar amount of the purchase price

Megawatt-hour per square foot (MWh/sf)

17. Which of the following strategies meets energy demand with renewable energy?

Installing a solar hot water heater

Incinerating waste to heat a home

Implementing a composting program in an office break room

Purchasing Renewable Energy Certificates (RECs)from a clean coal plant

18. The project team is conducting a feasibility study of a building project. The developer has pre-qualified four potential sites that are all financially viable.

Within the context of LEED, which site is the most applicable?

A brownfield site with no access to metro

A brownfield site in a national park with car access only

A greenfield site with access to public transport and proximity to grocery stores

A brownfield site with access to five lines of public transportation and basic services

19. Which of the following strategies prioritizes cost-effectiveness when designing a LEED project?

Onsite renewable systems

Enhanced Commissioning (Cx)

Measuring and verifying systems performance for one year

Applying an integrative design process

20. Which of the following is a minimum program requirement for the LEED for New Construction and Major Renovations Rating System?

Comply with minimum project size

Include temporary structures in floor area calculations

Define a site boundary for the sole purpose of complying with credits

Comply with the best practices of the International Organization for Standardization (ISO)

Page 3 of 3

21. Which industry benchmarking tool is used for measuring ongoing energy performance?

Bright Power's EnergyScoreCard

Department of Energy's EnerCop

EPA's ENERGY STAR Portfolio Manager

Department of Energy's EnergyIQ

22. Which strategy can be used to reduce the amount of construction waste?

Encourage recycling

Specify regional materials

Increase the use of recycled content

Institute an off-site composting program

23. Which is an example of a low-cost Water Efficiency strategy?

Install new flush valves or flow restrictors

Install subsurface cisterns to collect stormwater

Use only compostable toilets throughout the facility

Incorporate an on-site blackwater treatment system

24. Which of the following is a benefit of a building owner choosing to install a solar photovoltaic?

Lower liabilities

Heat Island Reduction

Decreased upfront building cost

Reduced greenhouse gas emissions

25. Which of the following is an appropriate usage of U.S.

Green Building Council (USGBC) terminology for a LEED project?

LEED certified building

LEED's certified building

LEED Accredited Building

LEED Registered, Gold Building

26. Which of the following is a tradable commodity representing proof that a unit of electricity was generated from a renewable source?

Tradable Energy Credit (TEC)

Renewable Wind Certificate

Renewable Energy Certificate

Certificate for Innovative Renewables

27. In the commercial LEED rating systems, which point range will achieve the Silver level of certification?

30-39 points

40-49 points

50-59 points

60-69 points

28. Which of the following negative impacts on the environment are a result of waste being transported/diverted to landfills?

Increased pre-consumer recycled content

Decreased post-consumer recycled content

Waste is incinerated and used to generate energy

Solid waste produces methane and potent greenhouse gas

29. Which of the following principles is a part of the integrated process?

Cradle-to-cradle

Systems thinking

Project scheduling

Building information modeling

30. Which strategy can be used during the building process and after occupation to reduce waste?

Implement a recycling program

Use certified lumber for framing

Use grey water for flushing of toilets

Develop a Sustainable Purchasing Policy

Real Dumps for LEED Green Associate Exam – Ensure You Pass

Real Dumps for LEED Green Associate Exam – Ensure You Pass

Share this post

Leave a Reply Cancel reply

Related Posts

LEED AP BD+C Exam Online Dumps – LEED AP Building Design + Construction