VNX301 Versa Certified Administrator - SD-WAN Specialist Exam Preparation Resources - Free Latest Dumps for IT Certification Exams

VNX301 Versa Certified Administrator – SD-WAN Specialist Exam Preparation Resources

dumps2026-05-14T09:40:26+08:00

To become Versa Certified Administrator – SD-WAN Specialist, you need to take and pass VNX301 exam. Learning Versa Networks VNX301 exam information is a required step. There are 60 multiple-choice questions in real Versa Networks VNX301 exam, and you have 90 minutes to answer all the questions. The available language is English. The exam cost is $150. The pass/fail result is available immediately. We provide the latest Versa Certified Administrator – SD-WAN Specialist VNX301 exam preparation resources, which are useful for you to take the test. Free Versa Certified Administrator – SD-WAN Specialist VNX301 exam preparation resources are available below.

Page 1 of 2

1. You are asked to ensure symmetric traffic flows between two SD-WAN branches.

Which feature should be enabled to achieve this objective?

Symmetric Forwarding

Symmetric Routing

Equal-Cost Multipath

Packet Striping

2. Examine the exhibit below.

You are onboarding the SOLDEU-R2 branch device using the staging script. You cannot get a Versa-Provider-Controller-VR IP address assigned, indicating that the IPsec tunnel to the corrector has not come up. You verified that the cables have been connected to the correct ports.

What has caused this issue?

The Controller IP address is incorrectly specified in the staging script.

The default gateway is in not in the same subnet as the WAN IP address.

The serial number was corrupted in the line feed.

The incorrect port was specified in the staging script.

3. You are configuring the BGP routing protocol between a Versa Secure SD-WAN CPE with AS number 64514 and two upstream service providers: SP1 with AS number 64515 and SP2 with AS number 64519. You want to prefer BGP routes learned from AS 64515 over routes learned from AS 64519.

Which BGP path attribute would be used to accomplish this task?

The BGP MULTI_EXIT_DISC path attribute

The BGP ORIGIN path attribute

The BGP LOCAL_PREF path attribute

The BGP NEXT_HOP path attribute

4. Examine the exhibit below.

The exhibit shows a device group created for a new group of hubs. The device template called “BMBF-TEMPLATE” has an Address object called “Server”. A network administrator creates the Class of Service Template called “Ship-CoS-IT” that has an Address object with the same name. Then it tries to onboard a new device to this device group.

Which statement is true about the configuration that this device will have?

The device configuration commit will fail.

The device configuration will have the Address object that was created last.

The device configuration will automatically create two copies of the same Address object.

The device configuration will have the version of the Address object in the QoS template.

5. As an administrator, you are migrating your legacy WAN to Versa Secure SD-WAN without changing the underlay network. You need to ensure that, during the migration process, legacy WAN sites are allowed to communicate with SD-WAN branches.

Which two steps should be implemented to accomplish this task? (Choose two.)

Apply the Spoke-to-Spoke-Direct topology for the SD-WAN branches.

Using workflows, configure the Gateway option in the hub template for the underlay links.

Configure BGP on the hub underlay links to advertise and receive the prefixes.

Configure an SD-WAN traffic steering policy to advertise the SD-WAN routes.

6. You are onboarding a branch with one WAN and one LAN interface. After a successful branch activation, the branch is not able to reach the Versa Controller. You realize that the WAN gateway IP address originally entered under the Device Bind Data menu in Versa Director is incorrect.

Which action will you perform to solve the problem?

Change the WAN gateway IP address on the branch appliance from the Versa Director Appliance context.

Change the WAN gateway IP address in Device Bind Data and onboard the branch appliance again.

Connect to the branch appliance from the Versa Controller Control VR and modify the WAN gateway IP address using the branch CL

Reset the branch appliance from Versa Director to automatically ping the correct WAN gateway IP address.

7. Examine the exhibit below.

Which two statements correctly explain the routing shown in the exhibit. (Choose two.)

The tvi-0/603 interface is paired with an interface in another VR for the default route.

The IP address configured on the tvi-0-603 interface its misconfigured by the template.

Any unknown IP unicast destination will use the tvi-0/603 interface for its exit.

The tvi-0/603 interface is a stub interface for black holing an unknown IP unicast destination.

8. Examine the exhibit below.

Referring to the exhibit, which two statements are correct? (Choose two.)

All branches will have the same VLAN ID for the LAN network.

All branches can have separate VLAN IDs on the MPLS WAN network.

The VLAN ID must be provided for the INET WAN network.

The VLAN ID field MPLS-WAN network is incorrect.

9. Examine the exhibit below.

An SD-WAN administrator has configured Direct Internet Access (DIA) for INET and INET-2 and wants to use SaaS Application Monitoring and SD-WAN policies to steer certain applications to the best Internet path on a certain VOS device.

Which two statements are true regarding the configuration shown in the exhibit? (Choose two.)

The VOS device will determine the optimal path out of INET and INET-2 using a proprietary algorithm.

The VOS device will load balance the sessions across INET and INET-2 as long as they are both SLA-compliant.

The VOS device will start using the LTE traffic if the INET circuit becomes unavailable.

The VOS device will not drop the traffic if there are no SLA-compliant nexthops.

10. You are asked to deploy a Versa Secure SD-WAN branch for 1000 locations. You need to profile the branches based on common deployment requirements.

In this scenario, which three configuration objects would be shared by multiple appliances? (Choose three.)

device templates

device groups

workflow device

service templates

device bind data

Page 2 of 2

11. Examine the exhibit below.

You are configuring an IPsec tunnel towards a non-SD-WAN site over the INET Transport-VR. The site IP address is 10.1.1.1. This tunnel is for traffic between the 192.168.100.0/24 and the 192.168.200.0/24 LAN networks. The tunnel does not establish.

Referring to the exhibit, which statement is correct?

The Tunnel Routing Instance is incorrect.

The Routing Instance should be changed to global.

A precedence higher than 0 needs to be set.

The Policy Configuration is missing an additional policy with the subnets swapped.

12. A customer has purchased 10 Versa SD-WAN licenses. In this scenario, which statement is correct?

The customer will be provided 10 Versa SD-WAN soft licenses.

The customer will be provided 10 Versa SD-WAN CPEs loaded with a Versa SD-WAN license.

The customer’s SD-WAN CPE will subjugate to Versa Director using ZTP; afterward, the license subscriptions will be managed by Versa Director.

The customer’s CPE will subjugate to Versa Controller using ZTP; afterward, the licenses and license subscriptions will be managed by Versa Controller.

13. Examine the exhibit below.

As an administrator of a Versa Secure SD-WAN, you are asked to find the current bandwidth of each WAN circuit used for SD-WAN connectivity in a branch, but the Director is not displaying any information for the WAN circuits.

In this scenario, what should be done to get the graph populated for all WAN circuits?

Refresh the page to get the graphs populated in the dashboard.

Select live data for all WAN circuits in the dashboard.

Select live data for MPLS circuits alone.

Unselect live data for INET circuit and select again.

14. You configured Direct Internet Access on your Versa branches using the workflow template.

Which statement is true in this scenario?

You must define a CGNAT address pool and rule, and associate the rule with the internet-facing network.

You must define a CGNAT address pool and rule, and associate the rule with the LAN interface.

DIA configured in a workflow automatically creates a CGNAT pool and rule, and associates it with the internet-facing network.

CGNAT is not required when you configure DIA services.

15. Which two methods would be used to upgrade deployed VOS branch devices? (Choose two.)

Copy the .bin file to the VOS device to the appropriate path and upgrade the device using the CL

Update the template workflow and select the new software package in the Preferred Software Version field, redeploy the workflow, and commit the template.

Upload the new software package to Versa Director, then use the Appliances dashboard to upgrade the devices.

Upload the new software package to Versa Director, then use the System > Director Upgrade dashboard to upgrade the devices.

16. Examine the exhibit below.

A DoS Profile shown in the exhibit is applied to an SD-WAN branch.

Referring to the exhibit, which statement is correct?

An alarm is generated if TCP throughput is 7000 packets per second.

Packets are randomly dropped if TCP throughput is 7000 packets per second.

Packets are completely dropped if TCP throughput is 7000 packets per second.

Packets are completely dropped if TCP throughput is 5000 packets per second.

17. Examine the exhibit below.

You are configuring Class of Service on a WAN-facing network interface, and you want to perform DSCP rewrite on the packets that are forwarded to the WAN. However, you are not able to turn on DSCP rewrite.

Referring to the exhibit, what is the cause of this issue?

Rewrite requires the configuration of shaping on the interface.

Scheduler Map and Rewrite cannot be configured at the same time.

The Associate interface/Network setting is set to Interface and not Network.

There are no rewrite rules configured.

18. You have deployed a group of devices in Versa Director, and the field technicians have performed the onboarding tasks onsite. One of the devices has not finished the onboarding process and does not appear in the Appliances list in Versa Director. The onboarding VPN tunnel from the device to the Controller is up.

Which two actions would help you solve this problem? (Choose two.)

View the Tasks list in Versa Director to see whether an error was encountered during the onboarding process.

Use the Monitor dashboard in Versa Director to view the status of the missing device.

Review the Unknown Devices dashboard in the Administration > Inventory menu.

Verify that the device is listed in the Connectors > Local > Resource Pool dashboard.

VNX301 Versa Certified Administrator – SD-WAN Specialist Exam Preparation Resources

VNX301 Versa Certified Administrator – SD-WAN Specialist Exam Preparation Resources

Share this post

Leave a Reply Cancel reply

Related Posts

Versa Certified SD-WAN Associate VNX100 Dumps – Make VNX100 Exam Preparation Well