Designing Multi-Site HPE Storage Solutions HPE0-J58 Study Guides

dumps2022-04-06T03:23:11+08:00

Designing Multi-Site HPE Storage Solutions HPE0-J58 exam will be retired on August 15, 2022. Please take it before the retired date. There are 60 questions in real HP certification HPE0-J58 exam, and you have 2 hours to write all the questions. The required passing score is 66%. Our online HP certification HPE0-J58 exam study guides are valid for you to pass. Free HP HPE0-J58 exam study guides are below.

Page 1 of 3

1. A customer has a two-node HPE 3PAR array with three additional drive enclosures. There is a single CPG setup for RAID 5 (3+1). One of the drive enclosures has failed and must be replaced.

What needs to be considered before starling the repair?

The enclosure I'O modules will need to be paired with the replacement enclosure

A node rescue will need to be performed after the enclosure replacement.

The array must be powered down to perform the enclosure replacement.

HA cage availably will be lost during the enclosure replacement process.

2. A customer has a Tier 1 application that has high bandwidth and is sensitive to latency.

The customer needs a solution to support this application. The solution must support replication between two sites over dark fiber links and support an RPO of zero.

Which solution meets the customer requirements?

dual HPE 3PAR 9450 arrays with data replicated using RCFC

dual Nimble AF40 arrays with data replicated over FC

dual HPE 3PAR 8400 arrays with data replicated using iSCSI

dual Nimble HF20 arrays with data replicated over iSCSI

3. You are starting an assessment to design a new multi-storage environment for a customer.

You have collected data on all the current arrays using SAF collector.

What should be the next step in your design process?

Open the .zip file with NinjaSTARS

Import the .zip file into OCA

Send the .zip file to [email protected]

Upload the .zip file to the SAF Portal

4. You are developing reports for a new proposal. You try to use SAF Analyze to upload the customer data you collected, but you receive an error.

What must you do first to begin the process?

Export me data as xml.

Create a new opportunity.

Create a gatekeeper on the SAF utility server

Create a single .zip file of all data exports

5. A startup company is considering an HPE Nimble solution. They have a small IT budget, and they need to be future-proof for changing performance requirements.

How does the Nimble architecture meet the company needs? (Select two.)

native support for block and file services

minimal downtime technology refresh

Support for FCoE

non-disruptive technology refresh

ability to mix-and-match All flash and hybrid nodes

6. A customer needs to analyze performance and capacity of their storage environment. Their environment

consists of HPE 3PAR, EMC VNX, and Pure Systems.

Which tool should you use to begin your assessment of their environment?

HPE Infosight

DD Analyzer

NinjaCrawler

SAF Collect

7. A customer needs to replicate multiple HPE 3PAR source arrays to a single HPE 3PAR target array at a Disaster Recovery sue.

What is required to support a 31 fan-in for Remote Copy?

HPE 3PAR 2OO00

a 4-node HPE 3PAR array

HPE SN4000B SAN Extension Switches

4-poit 16 Go Fibre Channel Adapters

8. An HPE Nimble customer needs to consolidate storage and scale performance. They are looking to purchase additional hardware to meet these requirements.

What is the best solution to offer this customer?

Add additional SSDs to the cache

Use multiple single-array storage pools

Add additional HBAs in the arrays

Use multi-array storage pools

9. A customer wants to replace an EMC storage array. You want to provide as much Information about the EMC configuration as possible to propose an HPE 3PAR or HPE Nimble Storage array.

Which HPE tool will meet your needs?

HPE SAF-Collect

HPE Storage Sizer

HPE Ninja Stars for 3PAR

HPE NinjaPiotecled-

10. You want to use FCAP authentication in an environment with FOS 7.3 running switches with no extra licenses.

What should you do to use this feature?

Switches must be upgraded to FOS 7.4 or higher

Certificates must be obtained from Brocade

A Secure Fabric license must be added to all switches in the fabric

Certificates must be obtained from a third-party vendor

Page 2 of 3

11. A customer requests a proposal for two HPE 3PAR arrays using asynchronous periodic replication. The customer has two data centers, and the current bandwidth available for replication between the data centers is 200 Mb/s.

The customer is replicating 30TB, and the change rate is 3% in 24 hours. The customer wants to achieve an RPO of 10 minutes.

Which statement about bandwidth and replication is true for the customer requirements?

The bandwidth is sufficient, and replication must happen every 5 minutes

The bandwidth will have to be increased, and replication must happen every 5 minutes

The bandwidth is sufficient, and replication must happen every 10 minutes

The bandwidth will have to be increased, and replication must happen every 10 minutes

12. A customer needs to upgrade their existing HPE 3PAR environment. They ask you to present a solution to gather data from all 200 of their HPE 3PARs arrays, which are spread across the globe. The arrays consist of various generations and OS levels, and they are managed by regional instances of SSMC.

What should you present to the customer as a solution?

using an HPE 3PAR CLI script with the checkupgrade command

using a script based on the HPE 3PAR Web Services API

using the upgrade report tool in HPE InfoSight

using the SSMC array configuration reports

13. A customer needs to replace their outdated storage arrays.

Which resource provides the necessary information to properly size a solution?

HPE NinjaCrawler

HPE Ninja Stars for Nimble

HPE Storage Sizer

HPE Storage Assessment Foundry

14. DRAG DROP

A customer has a primary site with an HPE Nimble Storage array and a secondary site with another HPE Nimble Storage array. The customer had a planned power outage at their primary site, and now needs to switch back to the primary array.

Place the steps into the order they must be performed to switch back the primary array.

15. For customers, what are the benefits of developing a company compliance policy? (Select two.)

reduced head count

minimized losses

improved security

improved agility

increased time to market

16. You are proposing a replication solution to a customer. A competitor offers a solution based on storage

virtualization appliances.

What should you stress about an HPE 3PAR replication solution in regard to the competitor’s proposal?

It will add on-the-fly encryption and compression to data being replicated outside the customer’s DC

It means less overhead for management and monitoring

It offers best-in-class backup and restore capabilities

It offers superior virtualization of 3rd party storage arrays

17. A customer with an existing StoreOnce 5100 appliance needs guidance on determining long-term expected growth of the storage utilization based on actual usage.

However, the customer’s ISV backup software only shows 30 days of historical data.

Which step should be performed to check the StoreOnce 5100 for best practices and allow for growth planning?

Run the DD Analyzer Sizing Tool

Run the HPE Storage Sizer tool

Perform an HPE NinjaProtected+ assessment

18. A customer needs a new replication solution that makes use of capacity efficiency technologies, even though data is being replicated to another array.

You have been developing a solution that includes two HPE 3PAR arrays.

What should you emphasize in your proposal?

The arrays share deduplication hash tables, and the target array only needs to compress the replicated data from the source array

Compression technologies increase the effective bandwidth being available for replication and disaster recovery

Thin Technologies, deduplication, and compression can be used on both sides with volumes in Remote Copy groups

The data being replicated will travel the connection between the arrays fully compressed and deduplicated

19. A customer needs to a multi-site environment where the entire inter-site transmission will be encrypted.

Which

products support this feature without additional licenses? (Select two.)

HPE 3PAR

HPE StoreOnce VSA

HPE Nimble arrays with SmartReplicate (remote replication)

any B-series 16Gb SAN Switch

HPE StoreOnce hardware appliance

20. Refer to the exhibit.

A customer requests a solution for two 3PAR 8450 storage arrays using synchronous replication. The customer wants the array configured to…

A junior architect you are coaching created the configuration shown for each array

What should you add to me configuration for each array to meet customer performance requirements?

32 additional SSD drives

SAS bus multiplexers

4 additional disk enclosures

1 additional pair of nodes

Page 3 of 3

21. A customer experienced data loss due to a cybersecurity attack. The data could not be restored because the snapshots and backups of the data were also affected.

The customer currently uses HPE 3PAR and RMC as a backup strategy You propose HPE StoreOnce Cloud Bank as an additional backup target.

How can this help mitigate the risk of future cybersecurity attacks?

by providing instantaneous recovery from Azure with RMC Express

by providing an offsite copy of the customer's data

by providing support to hosting of VMware Datastores for fast recovery

by providing support as an alternate replication target for 3PAR arrays

22. A customer has a requirement to provide disaster recovery for an application. The application has an RPO of 30 mins, with an RTO of 15 mins.

How can HPE 3PAR Remote Copy help meet the customer’s specified requirements in the most cost effective manner?

by using Periodic Asynchronous Replication with an interval of 15 mins

by using Synchronous Long Distance Mode

by using Synchronous Replication

by using Streaming Asynchronous replication with an interval of 15 mins

23. You are using NinjaStars to develop a proposal to refresh a customer's storage infrastructure.

Which information is needed from the existing environment to properly design a solution? (Select two.)

total IOPS

visualization ratio

RAID type

response time

number of Installed controllers

24. A customer attempts to test HPE 3PAR Peer Persistence automated failover by disconnecting the Quorum Witness (QW) link at the source 3PAR. then disconnecting the Remote Copy <RC) link at the source 3PAR one minute later However, failover does not occur

What should you do differently to test Peer Persistence automated failover?

The RC links should be disconnected from both arrays within 10 seconds or each other.

The QW and RC links should be disabled at the source array within 10 seconds of each other

The QW and RC links should be disabled at the source array more than 1 minute apart

The RC links should be disconnected from both arrays more than 1 minute apart

25. A customer has started to load their HPE 3PAR 8450 with data, but are not sure what data reduction they are achieving. They ask you to run analysis and estimate the deduplication ratio of data currently on a virtual volume (VV).

Which CLI command should you use to understand data reduction ratios?

showvv

tunevv

convertvv

checkvv

26. Refer to the exhibit, which reflects the Bill of Materials (BOM) configuration for one datacenter.

A customer needs a new storage solution of two HPE 3PAR 8440 arrays. The customer’s environment consists of eight physical servers in each data center attached to the SAN and one StoreOnce 3540 system with two FC I/O cards. The distance between data centers is less than 75 meters.

What should you add the BOM to meet the customer needs?

one HPE 25m Mini SAS High Density Active Optical Cable for each HPE 3PAR 8440

one HPR 3PAR StoreServ AC RPS Service Processor

one HPE 3PAR StoreServ 8000 Direct Connect Cabling Option for Drive Enclosure for each HPE 3PAR 8440

one HPE SN3000B SAN Switch 12-port Upgrade E-LTU per switch, appropriate number of SFPs and cables

27. Refer to the exhibit.

A customer is considering a new HPE 3PAR for the purpose of implementing deduplication and compression. Based on the output returned from the NinjaCrawler tool, what do you know about the customer data?

This data is a good candidate for HPE 3PAR deduplication

This data has a video data workload profile

This data is from an HP-UX system

This data has a block size which is not optimal for HPE 3PAR

28. A customer has two devices in separate fabrics that need to communicate on a regular basis. The customer does not want to merge these HPE B-series switch fabrics together due to security reasons.

What type of zoning should you recommend that will not merge the two fabrics, but will allow those devices to communicate?

Peer

LSAN

Quality of Service

Traffic Isolation

29. A customer requires an all-flash solution that will scale out, with multiple arrays for replication. The customer also needs the solution to provide more data per terabyte of flash storage than competing solutions.

Which HPE program should you leverage in your solution to help meet the customer’s requirements?

HPE Store More Guarantee

HPE Nimble Timeless Storage

HPE Get Thin Guarantee

HPE Get 6-Nines Guarantee

Designing Multi-Site HPE Storage Solutions HPE0-J58 Study Guides

Designing Multi-Site HPE Storage Solutions HPE0-J58 Study Guides

Share this post

Leave a Reply Cancel reply

Related Posts