Aruba Certified Campus Access Associate Exam HPE6-A85 Dumps Available

dumps2024-04-27T09:43:49+08:00

To pass the Aruba Certified Campus Access Associate Exam HPE6-A85 exam easily, the HPE6-A85 exam dumps are the best preparation material. There are 60 questions in the real HPE6-A85 exam, and you have 90 minutes to answer all the questions. The required passing score for the HPE6-A85 exam is 67%. The delivery languages are Latin American Spanish, English, Japanese. Free Aruba Certified HPE6-A85 exam dumps are below.

Page 1 of 3

1. What is the correct command to add a static route to a class-c-network 10.2.10.0 via a gateway of 172.16.1.1?

ip-route 10.2.10.0/24 172.16.1.1

ip route 10.2.10.0.255.255.255.0 172.16.1.1 description aruba

ip route 10.2.10.0/24.172.16.11

ip route-static 10.2 10.0.255.255.255.0 172.16.1.1

2. When would you bond multiple 20MHz wide 802.11 channels?

To decrease the Signal to Noise Ratio (SNR)

To increase throughput between the client and AP

To provision highly available AP groups

To utilize high gain omni-directional antennas

3. What is indicated by a solid amber radio status LED on an Aruba AP?

Not enough PoE is provided from the switch to power both radios of the AP

The radio is working in mesh mode

The radio is working the 5 GHz band only.

The radio is enabled in monitor or spectrum analysis mode

4. What does WPA3-Personal use as the source to generate a different Pairwise Master Key (PMK) each time a station connects to the wireless network?

Session-specific information (MACs and nonces)

Opportunistic Wireless Encryption (OWE)

Simultaneous Authentication of Equals (SAE)

Key Encryption Key (KEK)

5. Which flew in a Layer 3 IPv4 packet header is used to mitigate Layer 3 route loops?

Checksum

Time To Live

Protocol

Destination IP

6. A network administrator with existing IAP-315 access points is interested in Aruba Central and needs to know which license is required for specific features Please match the required license per feature (Matches may be used more than once.)

7. A network technician is troubleshooting one new AP at a branch office that will not receive Its configuration from Aruba Central. The other APs at the branch are working as expected. The output of the 'show ap debug cloud-server command' shows that the "cloud conflg received" Is FALSE.

After confirming the new AP has internet access, what would you check next?

Disable and enable activate to trigger provisioning refresh

Verify the AP can ping the device on arubanetworks.com

Verify the AP has a license assigned

Disable and enable Aruba Central to trigger configuration refresh

8. A network technician is using Aruba Central to troubleshoot network issues.

Which dashboard can be used to view and acknowledge issues when beginning the troubleshooting process?

the Alerts and Events dashboard

the Audit Trail dashboard

the Reports dashboard

the Tools dashboard

9. You need to configure wireless access for several classes of loT devices, some of which operate only with 802 11b. Each class must have a unique PSK and will require a different security policy applied as a role There will be 15-20 different classes of devices and performance should be optimized

Which option fulfills these requirements?

Single SSID with MPSK for each loT class using 5 GHz and 6 GHz bands

Single SSID with MPSK for each loT class using 2.4GHz and 5 GHz bands

Individual SSIDs with unique PSK for each loT class, using 5GHz and 6 GHz bands

Individual SSIDs with unique PSK for each loT class, using 2.4GHZ and 5GHz band

10. Which commands are used to set a default route to 10.4.5.1 on an Aruba CX switch when ln-band management using an SVl is being used?

iP default-gateway 10.4.5.1

ip route 0 0 0.070 10.4 5.1 vrf mgmt

ip route 0.0 0 0/0 10.4.5.1

default-gateway 10.4.5.1

Page 2 of 3

11. Which Protocol Data Unit (PDU) represents the data link layer PDU?

PDU1 - Signal

PDU2 - Frame

PDU3 - Packet

PDU4 - Segment

12. When using Aruba Central what can identify recommended steps to resolve network health issues and allows you to share detailed information with support personnel?

Overview Dashboard

OAlOps

Alerts and Events

Audit Trail

13. You need to troubleshoot an Aruba CX 6200 4-node VSF stack switch that fails to boot correctly Select the option that allows you to access the switch and see the boot options available for OS images and ServiceOS.

Member 2 RJ-45 console port

Member 2 switch mgmt port

Conductor USB-C console port

Conductor mgmt port using SSH

14. A hospital uses a lot of mobile equipment for the diagnosis and documentation of patient data.

What Is the ideal access switch for this large hospital with distribution racks of over 400 ports in a single VSF stack?

OCX 6300

OCX 6400

OCX 6200

OCX 6100

15. Which device configuration group types can a user define in Aruba Central during group creation? (Select two.)

Security group

Template group

Default group

Ul group

ESP group

16. What can be done to dynamically set the PoE Priority on a switch port when deploying IP cameras APs. and other PoE devices?

Enable Quick PoE on the switch modules

Enable profiling for device provisioning

Configure PoE power management to Class-based Mode

Configure PoE power management to Dynamic Mode

17. Please match the use case to the appropriate authentication technology

18. Make sure the interfaces are all ON.

Which configuration script will achieve the task?

Edge1# conf t vlan 20 name Mgmt interface vlan 20 ip address 10.1.1.10/24 no shut interface lag 1 shut vlan access 20 lacp mode active Int 1/1/51.1/1/52 shut no routing lag 1 interface lag 1 no shut

Edgel# conf t vlan 20 name Mgmt interface vlan 20 ip address 10 1.1 10/24 no shut interface 1/1/51.1/1/52 shut vlan trunk native 20 vlan trunk allowed all lag 1 lacp mode active interface 1/1/51.1/1/52 no shut

Edgel# conf t vlan 20 name Mgmt interface vlan 20 ip address 10 1 1 10/24 no shut interface lag 1 shut vlan trunk native 20 vlan trunk allowed all lacp mode active Int 1/1/51.1/1/52 shut no routing lag 1 interface lag 1 no shut interface 1/1/51.1/1/52 no shut

conf t vlan 20 name Mgmt ip address 10 1 1.10/24 no shut interface lag 1 shut vlan trunk native 1 vlan trunk allowed all lacp mode active int 1/1/51.1/1/52 shut no routing interface lag 1 no shut interface 1/1/51.1/1/52 no shut

19. Based on the "snow ip route" output on an AruDaCX 8400. what type of route is "10.1 20 0/24, vrf default via 10.1.12.2. [1/0]"?

local

static

OSPF

connected

20. Which statement is correct when comparing 5 GHz and 6 GHz channels with identical channel widths?

5 GHz channels travel the same distances and provide different throughputs to clients compared to 6 GHz channels

5 GHz channels travel different distances and provide different throughputs to clients compared to 6 GHz channels

5 GHz channels travel the same distances and provide the same throughputs to clients compared to 6 GHz channels

5 GHz channels travel different distances and provide the same throughputs to clients compared to 6 GHz channels

Page 3 of 3

21. What is the ideal Aruba access switch for a cost-effective connection to 200-380 clients, printers and APs per distribution rack?

Aruba CX 6400

Aruba CX 6200

Aruba CX 6300

Aruba CX 6000

22. Which statement about manual switch provisioning with Aruba Central is correct?

Manual provisioning does not require DHCP and requires DNS

Manual provisioning does not require DHCP and does not require DNS

Manual provisioning requires DHCP and does not require DNS

Manual provisioning requires DHCP and requires DNS

23. What is an advantage of using Layer 2 MAC authentication?

it matches user names to MAC address

No setup is required on the client

MAC allow lists are easily maintained over time

MAC identifiers are hard to spoof

24. What is the recommended VSF topology? (Select two.)

Star

Daisy chain plus MAD

Full mesh

Full mesh plus MAD

Ring

25. You put in a few show commands on switches EDGE1 and CORE1 to attempt to gather information to troubleshoot the issue Use the show command output images to determine the reason for the EDGE1 uplink being down

The physical interfaces are not members of the correct LA

Spanning-Tree block state is preventing the Core uplink from having connectivity to the edge

The Core is connected to the incorrect physical interlaces

LACP is not configured on the Core uplink

26. You need to drop excessive broadcast traffic on ingress to an ArubaOS-CX switch.

What is the best technology to use for this task?

Rate limiting

DWRR queuing

QoS shaping

Strict queuing

27. Which authentication does Aruba's Captive Portal use?

Layer 3 authentication

MAC authentication

802.1x authentication

Layer 2 authentication

28. Where are wireless client roaming decisions made?

Client device

Virtual Controller

Joint decision made by the origination and destination APs

Aruba Central

Aruba Certified Campus Access Associate Exam HPE6-A85 Dumps Available

Aruba Certified Campus Access Associate Exam HPE6-A85 Dumps Available

Share this post

Leave a Reply Cancel reply

Related Posts