Wonderful HP HPE0-J68 Exam Dumps Questions

dumps2021-11-19T07:05:03+08:00

Passing HP certification HPE0-J68 exam is easy now. The wonderful HP HPE0-J68 exam dumps questions are good and valid in the preparation. There are 60 questions in real HPE0-J68 exam, and you have 1 hour 30 minutes to complete all the questions. The required passing score of HPE0-J68 exam is 63%. Free HP HPE0-J68 exam dumps questions are available below.

Page 1 of 6

1. You have proposed a Primera array to a customer for new primary storage. The customer currently has an older 3PAR array that they will continue to use moving forward. The customer would like high

availability configured.

Which RMC Peer Copy pre-requisites do you need to point out to the customer? (Choose two.)

No license is required

2-port 10 Gb Ethernet Adapter (NIC) is required

4-port 1 Gb Ethernet Adapter (NIC) is required in each array

RMC 6.2 is required

Target drive type must match source drive type

2. Refer to the exhibit.

A customer purchased a Primera C6S0 array to replace several older 3PAR arrays. They

plan to upgrade the system as each 3PAP reaches the end of its lease. The initial sizing included 100TB effective capacity for an Oracle database environment.

The first 3PAR to come off lease has 100TB of VDI boot images that support thousands of users.

Which addition to the Primera should you recommend?

A)

Option A

Option B

Option C

Option D

3. Exhibit:

The customer has upgraded the first of their two HPE StoreServ 8200to the latest inform OS version to take the advantage of the compression feature. You have been asked to design the storage configuration to support oracle database volume to utilize HPE 3PAR compression.

Based on the analysis of the array.

What would be your suggestion to implement the requested change?

Install the catalyst agent on the oracle server to enable inline compression on the selected VV

Configure the source-side the compression to offload compression to the Host

Balance the workloads between the arrays to have enough headroom for compression

Consider adding another node pair for compression to work efficiently

4. A large organization is experiencing exponential data growth of object storage due to recent mergers and acquisition. They need an on-premise solution to optimize cost at petabyte scale

Which components should you recommend for a software-defined solution? (select two)

HPE Appolo 4510 server

HPE Complete CScalability RING

HPE Synergy 660 Gen10 compute modules

HPE complete CCTERA

HPE 3PAR Storeserv 9450c

5. Which feature allows HPE Primera, HPE Nimble, and HPE XP arrays to work with third-party management tools?

REST API

Data Protection Manager (DPM)

Store Serve Management Console (SSMC)

Service Processor

6. You are designing a new storage environment for a customer. They need good performance, but need to keep costs to a minimum.

They have a very limited staff, and staff is concerned about learning new technologies. You plan to recommend a Nimble HF20 solution.

Which storage connectivity components should you recommend?

FlexFabric switches, Nimble iSCSI card. FC adapters for servers

FC switches, Nimble FC card, FC adapters for servers

Ethernet switches, Nimble iSCSI card, dedicated NICs for servers

Ethernet switches, Nimble FC card, dedicated FC for servers

7. What is used to migrate data between nodes in an HPE StoreVirtual VSA environment?

Network RAID

Peer Motion

SmartClone

Remote Copy

8. A customer with several HPE 3PAR StoreServ arrays has reported latencies with newly updated applications.

You have proposed changes to the AO configuration and need to provide high-resolution reports on how the change has affected the latencies.

What should you propose on delivering the service time and I/O workload information daily for you and the customer?

Use IMC to schedule performance data gathering and email delivery.

Schedule SSMC System Reporter to send the defined email reports.

Enable the Service Processor to gather Performance data and schedule data transfer.

9. Match the type of storage found in today’s market to the HPE storage solution optimized for that capacity?

HPE 3PAR StoreServ - Block

MSA - Block

Nimble - Block

Scalability - Object

StoreEasy - File

StoreVirtual - Block

10. A customer has a SAN infrastructure with an HPE C-Class blade enclosure, and a mix of ProLiant G7, Gen8 and Gen9 servers. They require a new storage platform.

How can you confirm the new storage array will be supported in the existing environment?

Design an array with an older version of the firmware to ensure compatibility.

Document existing server and SAN information, and consult SPOCK to ensure firmware compatibility.

Design an array with the latest firmware, and recommend that the customer engage HPE PointNext to upgrade the existing hardware.

Check recommended firmware levels in the HP SAN Design Reference Guide to ensure firmware compatibility.

Page 2 of 6

11. How does the HPE StoreVirtual VSA storage platform scale performance and capacity?

eliminates the need for storage controllers

enables access through multiple protocols

aggregates all resources into a single storage pool

recreates storage pools on multiple devices

12. Which resource provides configurations for HPE tested and referenced configurations in a software-defined storage environment?

HPE Storage Sizer

One Config Advanced

NinjaStars

StoreVirtual VSA Ready Nodes

13. What has to taken into account when performing capacity planning for HPE Nimble storage using deduplication?

Deduplication is performed on a per volume basic

Deduplication is performed on a per array basic

Deduplication is performed on a per application category basic

Deduplication is performed on a per pool and block size basic

14. A customer has a new Nimble CS3000 21T storage systems and is facing latency issues for his 2TB ERP database .

What would be a design approach to solve this issue?

Perform controller upgrade to a Nimbel CS3000 storage systems

Add additional SSd drives as cache to the system and PIN the volume

Enable storage tiering on the system and map the volume to the new tier

Change RAID of the drives to RAID -1and setup quality of services for the volume

15. An existing Nimble customer is interested in adding storage to their environment to store his Backups, but has a constrained budget and limited personal.

The solution must scale to allow for substantial growth over the next five years?

Nimble SF series

Nimble AF series

Nimble cloud volume

Nimble CS series

16. What is the typical protocol used to access data from object storage?

NVMe

HTTP

iSCSI

17. DRAG DROP

Match the data access type in a SAN fabric to the correct description.

18. You are proposing a new Nimble solution to a customer that recently experienced data loss in their existing storage array.

Which features of the Nimble array should you emphasize to your customer to address their concerns? (Choose two.)

quick RAID rebuild

deduplication

compression

encryption

triple party

19. You want to deploy Recovery Manager Central to a customer environment.

How can you accomplish this? (Choose two.)

Install RMC on top of the virtual or physical RHEL system using the GUI wizard

Deploy an RMC virtual appliance to Microsoft Hyper-V hypervisor

Deploy RMC on top of the virtual CentOS system using the CLI

Deploy RMC on top of the virtual CentOS system using the GUI wizard

Install RMC on the top of the virtual or physical RHEL system using the CLI

Deploy an RMC virtual appliance to VMware ESXi hypervisor

20. A customer need a backup solution to their virtualized environment. The backup solution must be agentless, hypervise independent and integrated with HPE storage solutions. The solution must support Nimble snapshot and replication management .

What products meets the customer requirement?

HPE storeOnce Recovery manager central

Commvault Simpana Intellisnap

Micro Focus Data Protector

Veem Backup and Replication

Page 3 of 6

21. Which type of networking switch handles both Ethernet and fibre channel traffic?

Director

Virtual

Edge

Converged

22. A customer successfully implemented an HPE Primera solution.

Which tool can be used to verify performance counters, such as IOPS, match customer requirements?

NinjaCrawler

OneView

Recovery Manager Central

Primera on-node management GUI

23. A customer has a SAN based on HPE B-series switches with Gen6 fibre channel technology. Their workload is continually growing and they are experiencing performance issues. They need a solution to enable real-time monitoring and to speed up troubleshooting in his SAN backend.

Which unique feature of the HPE B-series Gen6 switches should you recommend? (Choose two.)

Fabric Watch

MAPS

Advanced Trunking

Fabric Vision

Extended Fabrics

24. A customer has an HPE 3PAR StoreServ 8200 with eight 3.84 TB SSD’s configured with RAID5 7+1. They plan to add four more 3.84 TB SSD’s.

What needs to be changed on the configuration once the new SSD’s are installed?

Reconfigure the cpg setsize as RAID6 6+2 and wait for tunesys to complete.

Change the availability level from cage to magazine.

Adjust the cpg growth value to match amount of SSD’s.

Change the cpg setsize to RAID5 5+1 and run tunesys.

25. A customer has a VMware environment running vSphere 6.5. They are running DL380 Gen10 servers with HPE 82Q adapters connected through a HPE SN3000B switch to a Nimble HF40. They plan to

upgrade the hypervisor.

What should they use to identify the latest firmware and compatibility information?

SAN Health Diagnostics

SPOCK

OneView

SAN Design Reference Guide

26. A customer need a new storage system for visual desktop infrastructure environment to reduce the time required to provision new desktop .

Which HPE solution should you recommended to fulfill this customers requirements?

Snapclones on HPE MSA 2040

SmartClone on HPE store virtual VSA (54)

Storage pool on HPE store Easy

Virtual Copy on HPE 3Par storeServ

27. When using a HPE 3 PAR Storeserv array to enable a user to apply arrayCbased data services to specific application and VM’s .

What is the benefit of implementing VM-level gradually of Volts?

Data sprawls eliminated by performing the migration functions at the array level using 3PAR HPE Dynamic Optimization

Efficiency is maintained by reclaiming space from deleted or migrated VMs using capabilities built into the storage ASIC

Performing is accelerated by detecting and moving the most frequently Caccessed VMs into the fast class tier

Performance is accelerated by leveraging the deduplication capabilities built into the storage ASIC

28. Refer to the exhibit.

You are configuring a new HPE array and verifying properties of a set of volumes.

Which RAID level is used on the VMwareDatastores-GF volume?

RAID 0

RAID 6

Triple Parity+

RAID 5

29. An HPE 3PAR StoreServ customer with FC, SSD and NL, drives is facing extreme latency during peak business hours with an OLTP application. They have enabled tiering using all drive types.

What could be used to resolve the issue?

Dynamic Optimization using tier 2

Adaptive Optimization using tier 1

Dynamic Optimization between tier 0 and tier 1

Dynamic Optimization using tier 1

30. Which functionality available in an HPE 3 Par StoreServ 8400 system that is not available in an HPE 3par Storesrve 7200

Data at Rest Encryption

Persistent Checksum end-to-end data integrity (correct)

Adaptive optimization and dynamic Optimization

Online import license

Page 4 of 6

31. HOTSPOT

A customer has a Nimble HF40 and needs to create a support ticket.

Click the option in the InfoSight portal where the customer can perform this task.

32. Which management interface uses four basic commands (Create, read, update ad delete) to enable administrators to define ad radically simply management processes?

Rest API

WMI

SMI-S

WEBEM

33. A customer runs their core application on an aging HPE 3PAR StoreServ 20000 Storage array. The application requires 100% availability.

Which HPE storage solution should you recommend?

Nimble

Nimble dHCI

Primera

MSA

34. A customer wants to expand his cascaded B-series based SAN but is concerned about latencies within the SAN backend. You recommend changing the topology to a full mesh.

Which switch feature will ensure that the latencies in the backend are at the lowest possible level?

LACP

NPIV

FSPF

VSF

35. A customer is looking for a centralized file-sharing solution that can provide print services in addition to 15TB of storage.

Which solution component should you recommend?

FC switch

NAS

FC-based array

Disk enclosure with integrated SAS switch

36. Which HPE 3PAR StoreServ feature allows a host to continue I/O uninterrupted during a firmware upgrade?

Peer Persistence

Persistent Ports

Persistent Memory

Persistent Cache

37. Which feature enables a non-disruptive environment where host-based multi-pathing software is not affected in the event of a firmware upgrade?

HPE 3PAR Access Guard

HPE 3PAR Persistent Ports

HPE 3PAR Persistent Cache

HPE 3PAR MPIO

38. While demonstrating an HPE 3PAR StoreServ 9450 array, the customer asks you to demonstrate the File Persona features.

Which objects do you need to create to demonstrate these features? (Choose two.)

File share

Storage container

Host

Remote copy group

Virtual file server

39. Which tool is used to provide centralized management of 3PAR and Primera arrays?

SMU

Primera UI

WebUI

SSMC

40. A customer currently runs MSA 2040 SAS storage system with SFF drives. They are planning a hardware refresh. The customer is using virtual pools only, and is concerned about problematic data migration to the new platform.

How can the update to MSA2050 be performed?

Peer migration license must be purchased for the online migration

Peer migration license must be purchased for the offline migration

Existing drives can be moved to the new system; both systems need to be online

Existing drives can be moved to the new system; both systems need to be offline

Page 5 of 6

41. Which protocol can be used for accessing StoreOnce VTL target from Veeam?

NFSv4

iSCSI

SMBv3

42. What is the benefits of HPE synergy (Select 2)

It can present block storage services from HPE 3par as part of the resource pool

It support up to 3 HPE store Virtual VSA nodes for storage RAID

It can use HPE 3PAR file persona for objet storage

It can compose and reclaim DAS storage

It support HPE blade system C-Class Flex Fabrics Interconnect module (need to check)

43. DRAG DROP

Match each HPE storage solution to its use case.

44. Match the HPE converged Strategy principle with its function

Federated Storage: - Move data between storage systems in peer-to-peer relationship simply, dynamically and nondestructively

Deduplication: -Reduce allocated capacity by eliminating data redundancy

Thin provisioning: -Reduce TCO, Opex and CPEx by using virtualization technology to make storage resources more efficient.

Storage tiering: -Use combination of I/O accelerator to place data to meet price, performance, and latency requirements.

Storage virtualization: - Deliver simplified management, higher utilization, efficient, and agility by separating the logical and physical resource.

45. You are planning a single-site Nimble solution with iSCSI connectivity. Two 10GbE SFP+ dual port NICS are included in the configuration. You designed an intelligent Resilient Framework (IRF) stack with HPE FlexFabric 5900CP switches.

Which statements is correct when discussing the IRF limits for this configuration?

When connecting an iSCSI storage to an IRF stack, a minimum of four 10GbE ports must be used per switch.

A maximum of two switches can be used in an IRF stack when connecting storage.

In an IRF stack with storage connectivity, the 40GbE ports cannot be used.

The used IRF ports for iSCSI traffic have to be configured as 10GbE converged ports.

46. A customer’s growing environment has a mix of HPE 3PAR StoreServ 8200 with 10K HDD, HPE 3PAR

StoreServ 9450, and HPE 3PAR StoreServ 2080D with 3 tiers of storage deployed in the same data center.

The customer needs to optimize performance by being able to move workloads to the most appropriate array as needed.

Which solution enables the customer to achieve this goal?

HPE OneView to automate cpg migration based on user defined policies.

HPE 3PAR Remote Copy in a Synchronous Long Distance topology.

HPE Smart SAN to provide autonomic federated management.

HPE 3PAR Peer Motion with SSMC to manage storage federation.

47. Which statement is correct when comparing functionalities of the AF and HF series in the Nimble storage portfolio? (Choose Two)

Zero Copy Clones are a unique feature of All-Flash arrays within the Nimble Portfolio.

>99.9999% availability is measured and guaranteed for AF and HF series arrays.

HF series has a dedicated read cache and AF series does not have a dedicated reach cache.

HF series supports storage snapshots and replication using Veeam Backup & Replication, HF and AF series support storage snapshots only

48. A customer is interested in integrating their HPE 3PAR StoreServ arrays into their OneView environment to support automated volume provisioning.

What must you install to enable the integration?

HPE SAN Network Advisor Enterprise

HPE SAN Network Advisor Professional

3PAR Host Explorer

OneView Global Dashboard

49. You are asked to review an installation plan for a new Primera storage array. The array will go into an existing environment that has been in production for over 4 years.

It includes:

✑ C7000s with Gen8 blades

✑ 8Gb Brocade switches

✑ a 3PAR 7400

✑ an MSA that is used as a backup target

What should you use to find appropriate installation and planning guides?

SAF Analyze and Collector

Information Library

Ninja STARS

SPOCK

50. HOTSPOT

You are handing over the installed array to customer. The customer wants to review the amount of HDDs and SSDs in the system.

Click the relevant menu option where the front panel of the head shelf can be visualized.

Page 6 of 6

51. A customer wants to implement a management and monitoring tool for an HPE B-series SAN switch environment. You plan to recommend the HPE SAN Network Advisor.

Which information about the customer’s environment will help you to decide which edition to recommend?

FCIP support

Amount of used fabrics

FCoE support

Fabric OS version

52. Which tool is used to determine current compaction ratios on Primera arrays?

WebUI

Storage Management Utility (SMU)

NinjaStars

SSMC System Reporter

53. Which protocols are currently used in the front end by HPE 3PAR StoreServ systems? (Choose two.)

iSCSI

Infiniband

SAS

NVMe

54. A customer asks you for a recommendation on setting up their new StoreOnce appliance. They plan to use NetBackup and need the highest performance setup they can get. Their local hosts are connected

via FC and the rest are connected via a WAN.

Which backup target type should you recommend?

VTL

CIFS

Catalyst

Wonderful HP HPE0-J68 Exam Dumps Questions

Wonderful HP HPE0-J68 Exam Dumps Questions

Share this post

Leave a Reply Cancel reply

Related Posts