Great Using HPE OneView HPE2-T37 Exam Dumps

dumps2023-06-02T09:22:36+08:00

Using HPE OneView HPE2-T37 exam is easy to pass now. We all know that there are 40 questions in real HP certification HPE2-T37 exam, and you have 1 hour to complete all the questions. The required passing score of HPE2-T37 exam is 70%. The test language is English. Free Using HPE OneView HPE2-T37 exam dumps are available below.

Page 1 of 3

1. What is a network set?

It is a collection of all internal networks defined for a specific type of traffic like vSAN or vMotion.

It is a collection of untagged Ethernet networks that form a named group to simplify server profile creation.

It is a collection of tagged Ethernet networks that form a named group to simplify server profile creation.

It is a collection of all networks configured within HPE OneView regardless of network type.

2. what is required to add a remote frame to the primary management ring?

UUD of the remote HPE Composer

Serial number of one of the remote frames

Remote frame Link Module IPv6 address

Request code from the primary HPE Composer

3. How can your customer implement HPE OneView so that it can be used to manage an HPE ProLiant server and HPE BladeSystem?

As an application running on the server with Windows system.

As a physical appliance based on HPE ProLiant 360 Gen 10.

As an application running on the server with CentOS Linux system

As a virtual appliance running on the supported hypervisor.

4. DRAG DROP

For each feature. indicate whether it is available with both hpeoneview Standard and hpeoneview Advanced licenses, or only with an hpeoneview Advanced license.

5. A customer has to deploy 21 HPE Synergy Compute Modules in a boot from SAN setup .

How this task can be simplified while keeping the profile consistent?

Boot volumes can be created on demand and defined in the server profile template.

Boot volumes can be prepared in advance and later presented as shared volumes to the Compute Modules.

An existing volume can be replicated automatically when creating a server profile.

single SAN volume can be created and utilized by all HPE Synergy Compute Modules.

6. You plan to update HPE OneVew to the latest version

What Should you do Mora starting HPE OneView update?

Disable HPE Remote Support at toe HPE OneView appliance level

Put all servers managed through HPE OneView to maintenance state

Run the Update Readiness checker tool to evaluate HPE OneView health status

Create a support dump for the appliance and for all managed logical interconnects

7. Your customer is considering HPE Synergy as a hardware platform for visualization workload. The customer environment is wry dynamic, and they often have to modify hypervisor networking.

Which resource provided by HPE should you discuss with this customer?

HPE OneView Global Dashboard allows server profile replication and change management.

PowerShell Library for HPE OneView allows scripted environment modification.

HPE OneView for VMware vCenter Server will enable host profile functionality and simplify changes.

HPE Image Streamer provides templates which can be updated to map the hypervisor requirements

8. What is the best practice when deploying an HPE OneView appliance?

Enable VMware Fault Tolerance if the appliance is deployed to a VMware hypervisor.

deploy the appliance in a hypervisor cluster that Is not managed by OneView.

Use thin-provisioning for the HPE OneView appliance to save storage capacity.

Deploy two HPE OneView appliances and configure them in HA mode.

9. Your customer wants to manage their HPE Superdome Flex using HPE OneView.

Which component must be added to HPE OneView to accomplish this task?

Baseboard Management Controller (BMC)

Rack Management Controller (RMC)

all nPARs created within the complex

only the base chassis from the complex

10. Refer to the exhibit.

After adding SAN Manager to HPE OneView. you noticed that all SANs are in the discovered state .

How will this affect HPE OneView storage management capabilities?

Snapshot functionality will be limited only to the volumes not using these SANs.

Volume presentation through server profile will work with the discovered state.

Auto-zoning functionality will not work until SANs are associated with networks.

Volume provisioning will only work for arrays that ate accessible through these SANs.

Page 2 of 3

11. DRAG DROP

For HPE Primera, match each task with the management tool that can be used to perform it.

12. Which components require an HPE OneView license for management?

HPE Virtual Connect modules

HPE Apollo XL 170r

Brocade and Cisco SAN Manager

HPE Primera and HPE 3PAR

13. Which statement regarding HPE OneView backup restore is true?

During backup restore, users with Administrator privileges can still login to HPE OneView

An HPE OneView backup can be used to restore individual components like server profile

Users with Backup Administrator privileges can restore an HPE OneView backup

Only users with Infrastructure Administrator privileges can restore an HPE OneView backup

14. HOTSPOT

Click the option that will prevent the appliance from sending any email notifications or forwarding any SNMP traps that are related to the server hardware.

15. Your customer plans to use HPE OneView to manage a small environment based on HPE ProLiant servers that includes G7 and Gen 10 systems .

What should you explain to thiscustomer?

HPE Management Agent must he installed for HPE ProLiant Gen 10 servers.

HPE ProLiant G7 and Gen10 cannot be managed using the same appliance.

Not all of the features will be available for HPE ProLiant G7 systems.

HPE ProLiant Gen 10 servers do not need an HPE OneView license.

16. Your customer wants to optimize GenlO servers for a virtualization workload by configuring all of them with a specific workload profile in the BIOS. All of the servers are managed using HPE OneView.

How can this task be completed?

Set a specific workload profile within Logical Interconnect Group and update all servers.

Set a specific workload profile for all managed servers as an HPE OneView global setting.

Set a specific workload profile within server profile template and update all profiles.

Set a specific workload profile using IL0 interface for each individual server.

17. Refer to the exhibit.

Which statement about the logical interconnect shown is true?

For FC uplink sets, an additional uplink from second module should be added for redundancy.

The maximum supported number of the internal networks for logical interconnect is configured.

Additional uplink ports can be added to ETH-Uplink to increase available bandwidth.

FC uplinks are not supported and will be converted to FCoE or RoCE uplinks.

18. Which licenses are optional to be purchased separately for HPE Synergy?

Global Dashboard licenses

FC Upgrade licenses

HPE OneView licenses

Virtual Connect licenses

19. Which statement about managing an HPE BiaoeSystem server is true?

A multi-enclosure Virtual Connect domain can be imported to HPE OneView without disrupting servers

Both c3000 and C7000 HPE BladeSystems enclosures can be imported to HPE OneView for monitoring

An HPE server blade cannot be deleted from HPE OneView It must be physically removed from the enclosure

An HPE server blade can be removed from HPE OneView by deleting the server from the Server Hardware section

20. Refer to the exhibit.

Your customer created multiple networks in HPE OneView, but only Eth-1 is available to be used within a server profile .

What is a likely cause of this situation?

The other networks are not configured with the required Smart Link parameter.

The other networks are not added to the Logical Interconnect Group configuration.

The other networks have Private Network' selected, which hides them from ComputeModules.

The other networks are configured with a purpose other than General or Management.

Page 3 of 3

21. What step must be taken to add an HPE SuperDome Flex to an existing OneView environment

A Rack Management Controller must be added to HPE OneView.

HPE Superdome Flex can be added to HPE OneView after at least one nPAR is created.

Each HPE Superdome Flex chassis must be added Individually using BMC I

HPE Superdome Flex complex can be added by adding base chassis of this complex.

22. How will setting the Purpose field within the network definition of a server profile impact the network traffic?

network purpose can give higher priority for a specific type of traffic

network purpose will impact the traffic only if Virtual Connect modules are used

network purpose will define QoS within Logical Interconnect

network purpose does not affect the behavior of the network

23. HOTSPOT

Click the option that will allow you to disable virtual MAC addresses or generate a new pool of virtual Worldwide Names.

24. Which statement about an HPE OneView server profile is true?

A server profile can be created only for HPE BladeSystem, HPE Synergy, and HPE Superdome Flex servers.

A server profile created for a specific server hardware type cannot be moved to a server with a different server hardware type.

A server profile can be used to configure a local storage controller, but cannot be used to configure SAN-based storage.

A server profile can be used to update firmware and drivers when the operating system on the server is up and running.

25. You originally configured boot mode for HPE ProLiant Gen10 server to ‘Legacy BIOS’ in an HPE OneView server profile and deployed an operating system. A few weeks later, you change the boot mode to the ‘UEFI optimized’ to leverage some features provided by this mode.

What must you do next?

reset an il_0 management processor to activate the new boot mode for the server

reinstall an operating system, as UEFI is using different drive format than Legacy BIOS

reset BIOS settings to the defaults so UEFI settings can be applied

reset BIOS settings to the defaults through the server profile after changing the boot mode

26. HOTSPOT

Click the option that will allow you to update the firmware of master and satellite modules.

27. Which action is allowed on storage pools managed by HPE OneView?

Volume provisioning

Setting storage pool replication

Changing storage pool RAID level

Changing storage pool capacity

28. HOTSPOT

As a part of troubleshooting, you have to reinstall the same version of the firmware on an HPE Synergy Compute Module. Click the area within the Firmware section of the server profile that will allow you to install the same firmware version.

29. You want to update the firmware for only two HPE Synergy Virtual Connect SE 32Gb FC Modules of a large environment.

From which level must this procedure be initiated?

Logical Enclosure

Logical Interconnect Group

Logical Interconnect

Server Profile

30. You are creating a Logical Interconnect Group for a three-frame HPE Synergy solution with HPE Virtual Connect SE100Gb F32 Modules for Synergy.

In which scenario should you set redundancy for master modules to be highly available?

When storm control or loop protection will be enabled for Virtual Connect modules

When each of the frames has two Virtual Connect modules installed

When each Virtual Connect module is installed in different frame

When each Virtual Connect module is installed in different fabric

Great Using HPE OneView HPE2-T37 Exam Dumps

Great Using HPE OneView HPE2-T37 Exam Dumps

Share this post

Leave a Reply Cancel reply

Related Posts