Real Questions for Aruba Certified Edge Professional HPE6-A75 Exam

dumps2022-01-11T02:37:06+08:00

Aruba Certified Edge Professional HPE6-A75 exam is easy to pass now. There are 60 questions in real HP certification HPE6-A75 exam, and you have 90 minutes to write the test. The available language is English. This HPE6-A75 exam will allow you to select three sections of four from the list: Design Professional, Mobility Professional, Switching Professional, ClearPass Professional or Security Professional. Each of the three sections must be passed. Free HP certification HPE6-A75 exam real questions are available below.

Page 1 of 2

1. Refer to the exhibit.

The network administrator needs to set up BGP between the two company switches. Switch-1 and Switch-2. The BGP connection does not establish.

Based on the exhibits, what does the administrator need to do to fix the issue?

Enable the multihop option for the neighbor on each of the switches.

Enter the network command for 10.0.0.0/24 in the router BGP mode on each switch.

Enable BGP on the interfaces that the switches use to reach each other.

Set the update source for the neighbor to the local loopback interface on each switch.

2. What are Operator Profiles used for?

to enforce role based access control for Aruba Controllers

to enforce role based access control for ClearPass Policy Manager admin users

to enforce role based access control for ClearPass Guest Admin users

to assign ClearPass roles to guest users

to map AD attributes to admin privilege levels in ClearPass Guest

3. What is true about clustering and AP connections to cluster members?

The AP will always stay connected to the LMS IP address configured in the AP profile.

During rebalancing, the active load is redistributed first.

The default thresholds are 75% for the Rebalanced Threshold and 25% for the Unbalanced Threshold.

AP load balancing is disabled by default.

4. Refer to the exhibit.

Based on the configuration of me create_user form shown, which statement accurately describes the status?

The email field will be visible to guest users when they access the web login page.

The visitor_company field will be visible to operators creating the account.

The visitor_company field will be visible to the guest users when they access the web login page.

The visitor_phone field will be visible to the guest users in the web login page.

The visitor_phone field will be visible to operators creating the account.

5. Refer to the exhibits.

The network administrator enters the commands shown in Exhibit 2.

What is the spanning tree status on Al and A2?

A1 towards traffic, and A2 blocks traffic.

Both Al and A2 block traffic.

A1 blocks traffic, and A2 forwards traffic.

Both A1 and A2 forward traffic

6. Which statement is true about the Endpoint Profiler? (Select two.)

The Endpoint Profiler uses DHCP fingerprinting for device categorization.

Data obtained from the Endpoint Profiler can be used in Enforcement Policy.

Endpoint Profiler requires a profiling license.

The Endpoint Profiler requires the Onboard license to be enabled.

The Endpoint Profiler can only categorize laptops and desktops.

7. OSPF is configured on an AOS-Switch, and the network administrator sets the router ID to 10.0.0.1. The administrator wants to be able to reach the switch at this ID from any location throughout the OSPF system. The administrator also needs the router ID to De stable and available, even if some links on the switch fail.

What should the administrator do?

Make sure that 10.0.0.1 is the IP address on the VLAN with the lowest I

Configure 10.0.0.1 on a loopback interface, and enable OSPF on that interface.

Configure 10.0.0.1 as a manual OSPF neighbor on each switch in the OSPF system.

Configure 10.0.0.1 as a secondary IP address on the switch 00BM poet.

8. An administrator needs to authenticate users connected to an ArubaOS Switch where the switch authenticates the user, assigns the firewall policies to the user, and processes some of the users' traffic.

Which connection method should the administrator configure on the ArubaOS-Switch?

Per-user tunneled node

Split-tunneled mode

Per-port tunneled node

VLAN tunneled mode

9. An administrator supports a cluster of four Aruba Mobility Controllers (MCs) with management addresses of 10.1.100.101, 10.1.100.102, 10.1.100.103, and 10.1.202.181. The administrator accesses an AP associated with this cluster, reboots it and accesses apboot mode. The administrator executes the printenv command.

Which AP parameter contains the IP addresses of the cluster members that the AP should use to connect to the cluster?

Noodelist

Servername

Master_ip

Cfg_lms

10. Which ArubaOS CLl command can an administrator execute to determine if AP load balancing is enabled in a cluster?

show switches

show lc-cluster group-membership

show aaa cluster essid

show ap active

Page 2 of 2

11. An administrator supports a RAP to a branch office. Employees at the branch office connect to an employee SSID that allows for split tunneling of the employee traffic. The RAP initially connects to the corporate office controller, but later loses connectivity to it.

Which operating mode should the administrator configure for a secondary SSID to be advertised during the loss of connectivity?

Standard

Persistent

Always

Backup

12. The administrator expects the AP to connect to a cluster, but the AP tails to connect.

The administrator examines the configuration of an AP from apboot mode shown in the exhibit.

What can the administrator determine about the configuration of the AP?

The AP is configured to terminate on a non-cluster Mobility Controller.

The AP is configured as a RAP to terminate on a stand-alone controller.

The AP is configured as a RAP to terminate on a Mobility Master.

The AP is configured to terminate on a Mobility Controller in a cluster.

13. Refer to the exhibit.

An employee connects a corporate laptop to the network and authenticates for the first time using EAP-TLS.

Based on the Enforcement Policy configuration shown, which Enforcement Profile wilt be sent?

Deny Access Profile

Onboard Post-Provisioning - Aruba

Onboard Device Repository

Onboard Pre-Provisioning - Aruba

14. A company has AOS-Switches deployed at sites with inexperienced IT staff. The main office network administrators want to track if configurations change on branch switches.

What should be set up for this purpose?

an SNMP trap

an RMON alarm

an auto-config server

an lP SLA profile

15. An administrator creates service-based policies for AirGroup on the Mobility Master (MM).

The administrator can define location-based policy limits based on which information?

AP names, AP groups, controller names, and controller groups

AP Fully Qualified Location Names (FQLNs) and controller Fully Qualified Domain Names (FQDNs)

AP names, AP groups, and AP Fully Qualified Location Names (FQLNs)

Controller names, controller groups, and controller Fully Qualified Domain Names (FQDNs)

16. An administrator implements a standalone controller that runs ArubaOS 8.x.

Which feature should the administrator configure to optimize the RF operation for the company’s WLAN?

AirMatch

Clustering

ARM

Zones

17. Refer to the exhibit.

A company has attempted to implement OSPF without success. The devices in Area I need to be able to reach Area 2. Routes should be aggregated for advertisement in other areas.

What must be changed to meet these requirements?

Change Area 3 to Area 0; remove Area 1 from Switch-2 and Area 2 from Switch-1.

Add the 10.2.0.0/16 range on Swttch-1 and the 10.1.0.0/16 range on Switch-2.

Add Area 1 and Area 2 on VIAN 100 on both Switch-1 and Switch-2. Remove Area 3.

Move the 10.1.0.0/16 range to Area 2 on Switch-1 and the 10.2.0.0/16rangetoArea 1 onSwitch-2.

18. Refer to the exhibit.

A known unicast packet is received from Switch-1 on the standby and must be forwarded to Switch-2.

How does the VSF fabric decide which port in the aggregated (ink should forward the packet?

The standby uses its own port in the link aggregation to forward the fabric.

The standby sends the packet to the commander over a VSF link, and the commander decides the correct port.

The standby uses the typical load sharing algorithm, and it might select either its port or the commander’s port.

The standby selects the port on the designated forwarder for the aggregation.

Real Questions for Aruba Certified Edge Professional HPE6-A75 Exam

Real Questions for Aruba Certified Edge Professional HPE6-A75 Exam

Share this post

Leave a Reply Cancel reply

Related Posts