SAP C_IBP_2208 Exam Practice Questions - Useful in the Preparation - Free Latest Dumps for IT Certification Exams

SAP C_IBP_2208 Exam Practice Questions – Useful in the Preparation

dumps2022-09-01T01:57:17+08:00

The latest SAP Certification C_IBP_2208 exam practice questions are online, which are useful in the preparation. In the real SAP Certified Application Associate C_IBP_2208 exam, there are 80 questions, and you have 180 minutes to complete the test. The cut score for the SAP C_IBP_2208 exam is 61%. The available language is English. Free SAP Certification C_IBP_2208 exam practice questions are below.

Page 1 of 3

1. You are configuring disaggregation for the KF1 key figure.

Which methods can you apply? Note: There are 3 correct Answers to this question.

Disaggregation according to an equal split

Disaggregation in batch triggered by an application job

An internal system-generated disaggregation

Proportional disaggregation by using KF2 in the expression

Disaggregation according to a user-defined expression

2. You need to define a new logic for a key figure to drive values from the PERPRODCUSTREGION level to the PERPRODCUST level.

Which of the following configuration options are possible for this process? Note: There are 2 correct Answers to this question.

Splitting the values from detailed to aggregated level by using copy operator

Splitting the values from aggregated to detailed level based on stored split-factor key figure

Splitting the values from aggregated to detailed level based on time profile attribute

Splitting the values from aggregated to detailed level using multiplication by the proportions

3. You created a key figure and want to add calculations.

Which of the following rules do you consider? Note: There are 2 correct Answers to this question.

All key figure calculations have calculation inputs, which can be marked as stored or calculated.

The calculation chain for a key figure must always result in a calculated key figure.

Aggregation calculations using SUM or MAX functions must be based on a higher aggregation U level.

Key figures can be calculated across different planning levels.

4. How can you check if key figure is editable or non-editable?

Using the Web-based Planning app when selecting key figures

Using the Key Figure Calculations app

Using the Edit View and then the Edit Planning View option

Using the Analytics Advanced app when selecting key figures

5. Analytics charts are created by the user in the Advanced Analytics application.

What actions are possible in the Advanced Analytics app? Note: There are 2 correct Answers to this question.

Group data.

Merge charts together.

Open graphics in Excel.

Apply filters on your data.

6. How many different time levels can be selected within one planning view?

All time levels available in the time profile

All time levels available in the time profile, restricted by global configuration parameter

Only time levels from the base planning level of selected key figures

Only base time levels of the planning area

7. Which conditions are prerequisites for key figure disaggregation?

The key figure is calculated and editable.

The key figure is calculated and aggregation mode is selected.

The key figure is set to Not Editable.

The key figure is stored and editable.

8. Which are the mandatory preconditions for an attribute that can be used for saving the segmentation results? Note: There are 2 correct Answers to this question.

It should be a non-key attribute of the master data type.

The length of the attribute needs to be 18 digits.

It belongs to a simple or compound master data type.

Its data type is INTEGER and its length has been specified.

9. What are some of the prerequisites for configuring a planning area that results in a successful consistency check? Note: There are 2 correct Answers to this question.

Configure at most two input key figures on the same planning level in a key figure calculation.

Assign the compound master data type and its component master data types.

Specify a planning horizon in the planning area for each level of the assigned time profile.

Configure at least one calculated key figure for the planning area.

10. You want to set up demand sensing to analyze demand changes in execution or close to execution windows.

Which of the following conditions must you consider during the setup? Note: There are 2 correct Answers to this question.

At setup test the system to run the demand sensing (full) algorithm weekly and the demand sensing (update) on a daily basis.

The result generates sensed demand data at the monthly time granularity for the full time horizon

Set up the forecast model to be executed at product-location level.

It is mandatory to load historical lag-based snapshot data.

Page 2 of 3

11. Which of the following key functions are supported by SAP IBP for sales and operations? Note: There are 2 correct Answers to this question.

Manual creation of feasible constrained plans

Finite resource planning

A basic demand planning process

An advanced demand planning process

12. You are reviewing the master data types for supply planning.

Which master data types are compound master data types? Note: There are 2 correct Answers to this question.

LOCATIONFR

sourcelocation

SOURCECUSTOMER

SOURCEPRODUCTION

13. Which of the following are features of the S&OP process templates? Note: There are 2 correct Answers to this question.

The number of steps in a process template is the same for all implementations.

Each step depicted in the template can have tasks associated with it.

All process templates are assigned to dashboards.

New instances of templates allow for re-use of the same processes again.

14. You are working with the inventory optimization process and you want to use a what-if analysis.

What parameters are assessed by this analysis? Note: There are 2 correct Answers to this question.

Changed variability

Service levels

Capacity consumption

Number of planning combinations

15. Which of the following solutions are feasible when using the time series supply optimizer? Note: There are 3 correct Answers to this question.

Violation of minimum aggregated inventory values

Not adhering to maximum transport values

Not-fully satisfied demands

Not respecting production capacity

Violation of minimum resource utilization

16. A time profile is defined with the levels of day, technical week, week, month, quarter, and year.

What condition in configuration will allow you to have a different value in the current week, versus all other buckets?

IF("PERIODID2" ="$$PERIODID2CU$$...)

IF("PERIODID5" ="$$PERIODID5CU$$...)

IF("PERIODID4" = "SSPERIODID4CU$$...)

IF("PERIODID3" ="$$PERIODID3CUS

..)

17. Model configuration allows the attributes of a master data type to be assigned as key figures.

Which features are relevant for this type of object?

This object contains user-defined criteria that monitor execution of business plans.

This object provides a single value for a unique planning combination.

This type of key figure is not usually stored and it cannot be set to editable.

This object is not exposed to the user in planning views or modeling.

18. You are adding a value-based filter to a planning view.

Which of the following conditions apply? Note: There are 3 correct Answers to this question.

The alerts dashboard is not available if a value-based filter is set for the open planning view.

These filters are always applied based on the values stored in the database.

You can only apply one value-based filter per planning view.

These filters can be used together with attribute totals in the same planning view.

You can add (or delete) planning objects to a planning view after these filters are applied.

19. You have set up infinite S&OP heuristics for unconstrained planning.

What must you do to model inputs as constraints? Note: There are 2 correct Answers to this question.

Enter transportation lead times.

Model adjusted transport receipts.

Create product substitutions.

Set minimum and maximum lot sizes.

20. What type of key figure requires a planning level to have all attributes as roots?

The conversion key figure, such as exchange rate

The special key figure marked as an aggregate key figure

The time independent key figure, such as FCSTMAPE

The attribute transformation key figure, such as PERIODID1

Page 3 of 3

21. NO.21 For which of the following application jobs can you enter planning filters as parameters? Note: There are 2 correct Answers to this question.

Purge Non-Conforming Data

Create Time Periods for Time Profiles

Purge Key Figure Data

Purge Master Data

22. You are modeling the introduction of a new product using Lifecycle Planning functionality in SAP IBP.

What is mandatory to create in your planning area for the setup of reference product(s) to work? Note: There are 2 correct Answers to this question.

Planning objects for the new product

Definition of an attribute representing the product ID

Definition of Actual Sales business meaning for one key figure

Definition of an attribute representing the product description

23. NO.23 You are redesigning planning for supply chain that is facing the issue of variability.

What is the best solution for dampening variability via demand classification?

SAP IBP for Demand

SAP IBP for Demand Driven Replenishment

SAP IBP for Inventory

SAP IBP for Sales and Operations Planning

24. How can you make charts and dashboards private?

Choose only relevant key figures and filters in the Analytics Advanced application.

Enable the relevant settings in the global configuration parameters.

Set restrictions for charts in the Permission filter application.

Enable the relevant settings in the Analytics Advanced and Dashboards Advanced applications.

25. You are creating advanced copy operators as part of an SAP IBP solution that is being implemented.

What do you need to be aware of when defining data transfer? Note: There are 2 correct Answers to this question.

Specifying target key figure is mandatory.

Specifying target key figure that is time independent is possible.

Specifying source key figure is mandatory.

Selecting by attribute with option 'contain' is possible.

SAP C_IBP_2208 Exam Practice Questions – Useful in the Preparation

SAP C_IBP_2208 Exam Practice Questions – Useful in the Preparation

Share this post

Leave a Reply Cancel reply

Related Posts