Valid SAP IBP for Supply Chain C_IBP_2305 Exam Dumps Ensure You Pass

dumps2023-09-18T09:26:25+08:00

SAP IBP for Supply Chain C_IBP_2305 exam basic information is the first step for you to study. There are 80 questions in the real SAP certification C_IBP_2305 exam, and you have 180 minutes to answer all the questions. The cut score for the SAP C_IBP_2305 exam is 60%. The available language is English. We have cracked the latest SAP IBP for Supply Chain C_IBP_2305 exam dumps for you to practice. Free SAP IBP for Supply Chain C_IBP_2305 exam dumps are below.

Page 1 of 3

1. Which of the following data can be tracked using a change-history-enabled key figure? Note: There are 3 correct answers to this question.

Key figure type

Modified date

Scenario ID

Reason code

Attributes

2. Which of the following solutions should be satisfied with violations penalized by the objective function of the time-series supply optimizer? Note: There are 3 correct answers to this question. Not adhering to maximum transport values

Violation of minimum aggregated inventory values

Violation of minimum resource utilization

Not respecting production capacity

Not-fully satisfied demands

3. You want to display and edit data in different Units of Measure (UOM).

Which of the following must you consider before you use the UOM? Note: There are 3 correct answers to this question.

Units of measure are usually not time-dependent.

Unit of measure is an attribute of a master data type, such as Product.

Units of measure are usually not time-independent.

Analytics provide the user with the option to select the target unit of measure.

Conversion to the target unit of measure is handled by SAP IBP Excel UI

4. Which pre-processing steps can be used to cleanse historical sales data before generating a statistical forecast in SAP IBP? Note: There are 2 correct answers to this question.

Substitute Missing with Mean or Median in Sales History

Intermittency Detection and Correction in Sales History

Promotion Sales Lift Elimination

Bias Detection and Correction in Sales History

5. You have to be logged on to two separate SAP IBP tenants.

What can help you differentiate the appearance of their user interfaces? Note: There are 2 correct answers to this question.

Setting a separate theme for the Home page in the Web U

Add the system name and tenant information from the About section to the Home page.

Defining a different default planning area via the User Preferences.

Having a different set of tiles in the Home group of apps.

6. What are the relevant use cases for helper key figures? Note: There are 2 correct answers to this questions.

Used at any level of calculation level except the Request Level

Used when you have more than three inputs at different planning levels in one calculation

Used by end-users in planning views to help visualize cross-period calculations

Used to break down a large calculation into manageable subcalculations

7. What are the S&OP operator (optimizer) parameters associated with demand fair share?

Number of fair share segments Additional tiering costs (default) Number of fair share segments late delivery

Number of fair share segments Additional tiering costs (default) Inventory days of supply

Number of fair share segments Maximum days of coverage Number of fair share segments late delivery

Number of fair share segments Additional tiering costs (default) Maximum inventory

8. What are some of the available ABC segmentation methods in SAP IBP? Note: There are 2 correct answers to this question.

By Number of Items (Sorted Values)

By Pareto Principle (Sorted and Cumulated %)

By Number of Items (Sorted Average)

By Pareto Principle (Sorted and Calculated Values)

9. You want to maintain key figure values for a new attribute and value combination, using SAP IBP, Add-in for Microsoft Excel, and are receiving an error related to missing combinations.

How can you resolve this problem? Note: There are 2 correct answers to this question.

Use the Data Integration app to load suitable data that creates the combinations

Use the Check Mode operator to create the combinations

Use the option New Planning Object in the SAP IBP, add-in for Microsoft Excel

Use the Manage Master Data app to create the combinations

10. Which of the following are features of lag-based snapshots? Note: There are 2 correct answers to this question.

Target key figures for these snapshots must have lag as a root attribute in its base planning level.

The number of lag-based snapshots are limited to nine levels.

Lag-based snapshots are created in the Configuration app for a fixed time range.

Target key figures for these snapshots are exposed to the user in planning views.

Page 2 of 3

11. You define fixing for a key figure.

Which of the following functions are available for this key figure? Note: There are 2 correct answers to this question.

Fixing is possible for manually editable key figures.

Fixing is possible for a certain period, including all child values in the hierarchy.

Fixing is possible for a certain quantity of a key figure value.

Fixing is possible for system editable key figures.

12. Which of the following key functions are supported by SAP IBP for sales and operations? Note: There are 2 correct answers to this question.

Time series analysis

Simple statistical forecast

Scenario analysis for operational supply planning

Multi-Level Supply Planning Heuristics

13. Which of the following are features of the S&OP process templates? Note: There are 2 correct answers to this question.

New instances of templates allow for re-use of the same processes.

All process templates are assigned to dashboards.

Each step depicted in the template can have tasks associated with it.

The S&OP process step can be started with an application job.

14. The S&OP Operator Profiles app is used to configure different types of algorithms.

Which algorithm-specific settings are unique for only the Time Series-based Supply Optimizer? Note: There are 2 correct answers to this question.

Time profile level

Discretization

Processing mode

Global cost factors

15. Which conditions have to be fulfilled as a prerequisite to maintain a key figure disaggregation? Note: There are 2 correct answers to this question.

The key figure is calculated and system editable.

The key figure is stored and all editable.

The key figure is stored and system editable.

The key figure is calculated and all editable.

16. Model configuration allows the attributes of a master data type to be assigned as key figures.

Which features are relevant for this type of object?

This type of key figure is not usually stored and it cannot be set to editable.

This object is not exposed to the user in planning views or modeling.

This object contains user-defined criteria that monitor the running of business plans.

This object provides a single value for a unique planning combination.

17. You created a key figure and want to add calculations.

Which of the following rules do you consider? Note: There are 2 correct answers to this question.

Aggregation calculations using SUM or MAX functions must be based on a higher aggregation level.

The calculation chain for a key figure must always result in a calculated key figure.

Key figures can be calculated across different planning levels.

All key figure calculations have calculation inputs, which can be marked as stored or calculated.

18. You need to define a new logic for a key figure to drive values from the PERPRODCUSTREGION level to the PERPRODCUST level.

Which of the following configuration options are possible for this process? Note: There are 2 correct answers to this question.

Splitting the values from aggregated to detailed level, based on the time profile attribute

Splitting the values from aggregated to detailed level, based on a stored split-factor key figure

Splitting the values from aggregated to detailed level using multiplication by the proportions

Splitting the values from detailed to aggregated level by using a copy operator

19. You need to use your resource cost effectively with a certain minimum use, even if it means producing more than demand.

Which solutions would apply to this scenario? Note: There are 2 correct answers to this question.

Capacity leveling will be possible for production and storage resources.

Balance can be achieved between excessive prebuild and minimum use by incorporating violation costs.

Excess stock can be generated and will need to be staged in an overflow warehouse.

Minimum capacity utilization will result in pull production occurring.

20. Which of the following are capabilities of the Manage Forecast Error Calculations - Inventory Optimization app? Note: There are 2 correct answers to this question.

Adjust for forecast bias in Forecast Error CV calculations

Propagate forecast error to upstream locations in a supply chain network

Adjust Safety Stock Recommendations based on forecast error CV input

Identifiy intermittent demand for Forecast Error CV calculations

Page 3 of 3

21. Which type of Master Data will be represented by the Master Data Type LOCATIONFR?

Virtual Master Data Type

Reference Master Data Type

Compound Master Data Type

External Master Data Type

22. How many different time levels can be selected within one planning view?

Only base time levels of the planning area

All time levels available in the time profile

All time levels available in the time profile, restricted by global configuration parameter

Only time levels from the base planning level of selected key figures

23. What is a prerequisite for modeling outsourced manufacturers with production capacity using the Supply Optimizer?

Use production lead times and offsets to manage components at the outsourced manufacturing location

Ensure that the outsourced manufacturing locations have a separate subnetwork

Model target inventory and stocks at the outsourced manufacturing location

Model relative production costs across internal locations and outsourced manufacturing locations

24. For your project, you create a new planning area and consider how to create analytics and alerts for it.

How can you create these objects?

Use the option for copying analytics and alerts into the new planning area from the existing custom planning area.

Create analytics and alerts in the new planning area from scratch using the Intelligent Visibility application.

Use the option for copying analytics and alerts when creating a new planning area from the sample SAPIBP1.

Merge analytics and alerts into a new planning area from any sample planning area.

25. Which are the mandatory preconditions for an attribute that can be used for saving the segmentation results? Note: There are 2 correct answers to this question.

The Business Meaning of the attribute has been specified.

The attribute should be a non-key attribute of the master data type.

The attribute belongs to a simple or compound master data type.

The attribute should be assigned to all planning levels.

26. Which SAP IBP planning operator can be run to delete planning objects in a certain version?

Purge Key Figure Data

Purge Key Figure Data Outside Planning Area Planning Horizon

Purge Non-Confirming Data

Purge Master Data

Valid SAP IBP for Supply Chain C_IBP_2305 Exam Dumps Ensure You Pass

Valid SAP IBP for Supply Chain C_IBP_2305 Exam Dumps Ensure You Pass

Share this post

Leave a Reply Cancel reply

Related Posts