NetApp Certified Support Engineer NS0-194 Questions and Answers

dumps2022-01-19T05:59:15+08:00

Many Netapp candidates came to our website to ask about the latest Netapp Certified Support Engineer NS0-194 exam questions. The latest Netapp certification NS0-194 questions and answers are here for you. We all know that there are 60 questions in real Netapp NS0-194 exam, and you have 1-1/2 hours to finish the test. Free Netapp certification NS0-194 exam questions and answers are available below.

Page 1 of 2

1. A customer receives the message shown below in their EMS logs.

Tue Jun 27 18:34:18 CEST

[netapp-ct1: cp_worker: wafl.cp.toolong:error]: Aggregate AG1_NTAP_PROD experienced a long CP.

Tue Jun 27 18:37:10 CEST

Which two data sources do you use to explain this message? (Choose two.)

ONTAP System Manager

Performance Archive

Active IQ Unified Manager

mgwd.log

2. Several clients are accessing an ONTAP SnapMirror DP destination volume. Some clients frequently access the newest SnapMirror volume data. Accessing this data is much slower when compared to clients that directly access data on the source. You use the wafl scan status command against the destination.

What is a symptom of the problem in this scenario?

blocks used summary update

active bitmap rearrangement

container block reclamation

volume deswizzling

3. What is the consequence of a loss of connectivity between a Cloud Volumes ONTAP (CVO) instance and Cloud Manager for four or more days?

The CVO instance sends an AutoSupport message.

The CVO instance must be added back manually to Cloud Manager.

Cloud Manager removes the CVO instance from its inventory.

The CVO instance is stopped.

4. You want to use the supported method to upgrade the ONTAP version of a Cloud Volumes ONTAP instance from ONTAP 9.5 to ONTAP 9.6.

In this scenario, which NetApp tool accomplishes this task?

Cloud Manager

Cloud Insights

Active IQ Unified Manager

ONTAP System Manager

5. A customer must store physical hard copies of transaction data off site to meet regulatory requirements.

Which NetApp technology enables the customer to accomplish this task?

SnapVault

NDMP

SVM DR

FlexCache

6. Which type of MetroCluster is shown in the exhibit?

2-node stretch MetroCluster

4-node MetroCluster IP

4-node Fabric-Attached MetroCluster

4-node stretch MetroCluster

7. What are two supported cabling methods for a NetApp HCI compute node? (Choose two.)

1-cable configuration

2-cable configuration

6-cable configuration

4-cable configuration

8. For testing purposes, your customer decides to use FC on a single-node ONTAP cluster. There is only one host that the customer expects to use. High availability is not a concern for this test. The customer connects the host directly to the ONTAP node. The LUN is set up, and the igroup is configured. When the customer tries to attach to the LUN from the host, the LUN is not seen by the host.

Which statement is correct in this scenario?

Multipathing must be used and connected to another FC path.

NPV must be enabled on the host before trying to attach to the LU

NPIV must be enabled on the host before trying to attach to the LU

An FC switch must be used with ONTA

9. What is the minimum number of compute nodes required to run the NetApp Deployment Engine for NetApp HCI?

10. You need to provide a customer an action plan to update an ONTAP system after a security bulletin has been issued.

In this scenario, how do you accomplish this task?

Use the Interoperability Matrix Tool.

Review the ONTAP 9 product page.

Download the target version and do a pre-check.

Use Upgrade Advisor on Active I

Page 2 of 2

11. In ONTAP 9.6, activity on the command line is found in which log?

audit.log

messages.log

command-history.log

mgwd.log

12. A customer asks what is the correct way to configure an ONTAP system for multi-tenancy. The customer wants to serve data and also protect data using SnapMirror from tenant A using network A and from tenant B using network B.

In this scenario, which statement is correct?

The customer must use different VLANs for the two tenants.

This setup can only work if tenant A and tenant B use a shared network infrastructure.

The customer must set up two different IPspaces for the two tenants.

Each node can only communicate with tenant A or tenant B, but not with both at the same time.

13. When using NetApp Volume Encryption (NVE) which type of server is needed to keep encryption keys separate from encrypted data?

KMIP

RADIUS

TLS

TKIP

14. You are working on a fabric MetroCluster. After a site failure, the plex starts to resync automatically to the aggregate mirror of Aggr1. The plex now shows a status of resyncing. During this process, you experience a slow resync of the SyncMirror plex.

In this scenario, how do you solve the problem?

Add more disks to the aggregate to add more I/O capacity.

Destroy and re-create plex, then run a baseline sync.

Tune the resync speed by adding a QoS policy and limit the concurrent I/O to the aggregate.

Tune the resync speed using the storage raid-options command.

15. You have an ONTAP 2-node cluster. You run a read/write test workload against an SMB share, and it is slower than you expected. You run the same test again, but this time you monitor the storage using a QoS command.

Referring to the exhibit, what is the problem?

There is a disk bottleneck.

An HA interconnect problem is present.

The SMB read sizes should be increased.

The NVRAM needs to be replaced.

16. Which NetApp HCI component communicates with activeiq.solidfire.com and the Cloud Data Services portal?

the NetApp Element software vSphere plug-in

the management node (mNode)

the NetApp Trident software

the NetApp Element software Management Interface

17. You receive the error shown below on a FAS2750 HA pair.

Mon Jun 24 00:27:30 UTC [NetappA: scsi_cmdblk_strthr_admin:

scsi.cmd.checkCondition:error]: Unknown device 0a.00.99: Check Condition: CDB 0x12:

Sense Data SCSI:hardware error -(0x4 -0x44 0x0 0x0) (0).

The system is cabled as shown in the exhibit.

What should you do to clear the error?

Replace the cable connected to controller A's 0a port.

Replace the controller of controller

Re-cable the system per the FAS2750 installation guide.

18. Which three techniques are used in ONTAP to improve storage efficiencies? (Choose three.)

compression

encryption

compaction

ADP

thin provisioning

NetApp Certified Support Engineer NS0-194 Questions and Answers

NetApp Certified Support Engineer NS0-194 Questions and Answers

Share this post

Leave a Reply Cancel reply

Related Posts