D-RP-DY-A-24 Dell RecoverPoint Deploy Exam Online Dumps

dumps2024-05-06T09:34:55+08:00

D-RP-DY-A-24 Dell RecoverPoint Deploy real exam consists of 60 questions, and you have 90 minutes to answer all the questions. The required passing score for D-RP-DY-A-24 exam is 63. To help you prepare for this D-RP-DY-A-24 Dell RecoverPoint Deploy exam well, we provide the latest D-RP-DY-A-24 Dell RecoverPoint Deploy exam online dumps. Free Dell RecoverPoint Deploy D-RP-DY-A-24 exam online dumps are available below.

Page 1 of 8

1. A new RecoverPoint/SE environment has been installed with a single cluster. There are no limitations regarding journal sizes and you want to choose how frequently RecoverPoint can create point-in-time copies.

What is the highest frequency available for point-in-time copies in this environment?

One per I/O

One per sec.

One per 500 µsec.

One per 500 msec.

2. Which RecoverPoint product(s) may be licensed by the amount of array capacity?

RecoverPoint/EX only

RecoverPoint/CL only

RecoverPoint/SE

RecoverPoint/EX and RecoverPoint/CL

3. What is the maximum supported storage capacity, per license, for an EMC RecoverPoint/EX environment?

100 terabytes

2 petabytes

4 petabytes

10 petabytes

4. What is the maximum number of clusters supported in an EMC RecoverPoint/CL environment?

5. In a EMC RecoverPoint environment, which EMC product adds support for heterogeneous storage systems?

VPLEX

VNX/CX

VMAX

Isilon

6. Which EMC storage technologies are supported with EMC RecoverPoint?

VNX, VMAX, and VPLEX

VNX, Data Domain, and Isilon

VMAX, VPLEX, and Data Domain

VPLEX, Isilon, and VNX

7. What is the maximum number of copies of production data supported with RecoverPoint?

Four remote copies

One local copy and four remote copies

Two remote copies

Two local copies and two remote copies

8. There is one instance of RecoverPoint/CL installed that is protecting data within a data center.

What is the maximum number of additional clusters that can be added to this configuration?

9. Your business is planning to deploy RecoverPoint for your DR solution.

What is an important consideration when using Consistency Groups in RecoverPoint 4.1?

Supports up to two synchronous copies per Consistency Group

Supports up to three remote copies in a same remote cluster

Fibre connectivity is required for synchronous replication

Supports host-based and array-based write splitters

10. Which Ethernet interface on an RPA is used for replication to the remote clusters?

eth0

eth1

eth2

eth3

Page 2 of 8

11. Which Ethernet interface on an RPA is used for management?

eth0

eth1

eth2

eth3

12. Through what does RecoverPoint support heterogeneous storage environments?

VPLEX

Any array-based splitter

APIs

VMAX splitter only

13. Which virtualization solution components are supported by RecoverPoint?

Hyper-V, VMware vCenter monitoring, VMware SRM

Hyper-V only

VMware vCenter monitoring only

VMware SRM only

14. What is the maximum number of copies supported using the MetroPoint topology for VPLEX continuous data replication?

15. Which protocol does the vRPA use to access the journal volumes?

iSCSI

FCoE

16. A company is using an EMC VNX storage array. RecoverPoint is being configured to replicate to a DR site.

RP will be protecting three datastores:

- A thick 100 GB LUN containing 60 GB of data

- A thin 50 GB LUN containing 15 GB of data

- A thick 75 GB LUN containing 75 GB of data

How much of the user data is being replicated to the DR site?

150

185

190

225

17. What is the maximum number of RPA clusters allowed in a RecoverPoint/SE configuration?

18. Which RecoverPoint feature requires the production copy to be located on a VNX?

Snap-based Replication

Deduplication

Synchronous replication

Distributed Consistency Groups

19. Snap-based Replication requires the production volume of a Consistency Group to be on which array type?

VNX

VMAX

VPLEX

Isilon

20. A storage administrator has been tasked to demonstrate the image access capability of RecoverPoint.

Which RecoverPoint option should they use?

Test a Copy

Fail Over

Fail Back

Recover Production

Page 3 of 8

21. A RecoverPoint cluster contains a Consistency Group with one remote copy.

Which volume can be used to verify that snapshots are being created?

Remote copy

Production copy

Repository

Snap copy

22. Which RecoverPoint features are supported on physical and virtual RPAs?

Deduplication, SRM integration, and Snapshot-Based Replication

Distributed CGs, Deduplication, and SRM integration

SRM integration, Snapshot-Based Replication, and Distributed CGs

Snapshot-Based Replication, Distributed CGs, and Deduplication

23. What is the minimum number of RecoverPoint Clusters required to use the MetroPoint feature?

24. A company recently acquired a new DR site and requires local Fibre Channel based production data to be replicated synchronously. They are investigating what infrastructure is needed on this DR site.

What is an important connectivity consideration?

Site-to-site connectivity can be based on I

Site-to-site connectivity requires Fibre Channel.

Site-to-site connectivity requires FCI

Maximum synchronous replication speed is 400 MBps.

25. A company recently acquired a new DR site and requires their production data to be replicated to this DR site.

What is an important consideration about the RecoverPoint out-of-band architecture?

Performance on the production site is not impacted.

Site-to-site connectivity needs to be based on Fibre Channel.

Maximum asynchronous replication speed is 400 MBps.

Maximum synchronous replication speed is 400 Mbps.

26. An existing RecoverPoint/CL environment consists of one cluster at the main office and two off-site DR clusters. You have been asked to expand the environment to the maximum number of DR sites using RecoverPoint.

How many additional clusters could be added to this RecoverPoint Environment?

27. An existing RecoverPoint/CL environment consists of one cluster at the main office and one off-site DR cluster. You have been asked to expand the environment to the maximum number of DR sites using RecoverPoint.

How many additional clusters could be added to this RecoverPoint Environment?

28. Which RecoverPoint family is licensed per array and array capacity?

RecoverPoint/EX only

RecoverPoint/SE

RecoverPoint/CL only

RecoverPoint/EX and RecoverPoint/CL

29. What are the minimum RecoverPoint and VPLEX versions that support MetroPoint?

RecoverPoint 4.1 and GeoSynchrony 5.4

RecoverPoint 4.0 and GeoSynchrony 5.3

RecoverPoint 4.1 and GeoSynchrony 5.3

RecoverPoint 4.0 and GeoSynchrony 5.4

30. What are key use cases for RecoverPoint?

Disaster Recovery, Operational Recovery, and Data Migration

Disaster Recovery and Operational Recovery only

Disaster Recovery and Data Migration only

High Availability Solution Implementation

Page 4 of 8

31. An existing RecoverPoint cluster has four physical RPAs deployed with VMAX arrays.

Which RPAs need to be masked to the VMAX gatekeepers in order to deploy the VMAX splitter?

RPA 1 and RPA 2

RPA 1 only

All RPAs in the cluster

RPA 2 only

32. A customer is installing a new RecoverPoint environment. All RPAs have been racked, cabled, and powered on. You have chosen to automatically discover the RPAs using Deployment Manager. After running the discovery, no RPAs are found.

What is the most likely cause of this issue?

No DHCP server on the network

Port 443 not open on the network

RecoverPoint/SE wizard selected

RPAs not configured into a cluster

33. You are adding a VMAX array to a RecoverPoint/CL environment.

What needs to be done?

Verify there is a zone that includes the RPA ports and the same VMAX front end ports that are zoned to the production host initiator.

Verify that the 16 new gatekeepers are in the same storage group as the repository and journals. Add the RPA initiator and port groups to the masking view.

After setting up the masking view use boxmgmt to log in to one of the site leader RPAs and be sure to tag all volumes that RecoverPoint is masked to C including the production and copy volumes.

Verify that the VMAX is at Enginuity microcode 5876 or higher. After doing the LUN masking, enable Write-Protect ByPass (WPBP). Ensure that the proper license for the VMAX is installed on the RPAs.

34. A customer has three VMAX arrays and one VNX array fronted by an EMC VPLEX. They want to use RecoverPoint to protect their environment.

How many licenses, of which type, would be required for their environment?

1 EX license only

4 EX licenses

5 EX licenses

1 SE license and 1 EX license

35. A customer has two VMAX arrays and three VNX arrays fronted by an EMC VPLEX. They wish to use RecoverPoint to protect their environment.

How many licenses, and of which type, would be required for their environment?

1 EX license

1 SE license and 2 EX licenses

5 EX licenses

6 EX licenses

36. Which connectivity protocols are used to interconnect RecoverPoint clusters?

FC and IP

FC and iSCSI

FC and FCoE

FCoE and IP

37. What information is required to connect a new RecoverPoint cluster to an existing one?

WAN IP address and internal cluster name

RPA serial ID

Site ID and Management IP address

Internal cluster name only

38. You are installing RecoverPoint/SE, and have selected the automatic zoning option. There are four VNX ports in each fabric.

How many zones are automatically created on each fabric for a two-node RPA cluster?

39. When using Deployment Manager to install RecoverPoint/SE, which zoning methods are available with Brocade switches?

Automatic and Manual

Manual and Semi-automatic

Automatic and Semi-automatic

Automatic and Virtual

40. What must be installed on the VNX prior to deploying the RecoverPoint Write splitter?

RecoverPoint Splitter Enabler only

RecoverPoint Driver and RecoverPoint Splitter Enabler

RecoverPoint License

Unisphere Service Manager

Page 5 of 8

41. You are responsible for installing a four-node RPA cluster. All RPAs are powered on. Both the FC and IP networks are connected, zoned, and routed properly. The RPAs are loaded with the latest image and IP addresses are set. However, Deployment Manager cannot discover RPAs.

What is a possible cause?

Port 22 not open between host running Deployment Manager and RPAs

Deployment Manager host and RPAs on different subnets

DHCP not used to set IP addresses for RPAs

RPAs not installed separately using Deployment Manager

42. When choosing a journal for a CG what would be a factor in selecting which LUNs to use?

Volumes that are all close to the same size

Volumes masked to the production host

Any volume less than 10 GB

Only thin LUNs

43. After expanding to include an additional existing RecoverPoint cluster you use Deployment Manager to connect the clusters, but it fails.

What might be the problem?

New cluster is already licensed

RPAs at second cluster are not same type

Second cluster not yet added to Repository

No splitter added to second cluster

44. After expanding to include an additional existing RecoverPoint cluster you use Deployment Manager to connect the clusters, but it fails.

What might be the problem?

New cluster has existing Consistency Group

RPAs at second cluster are not same type

Second cluster not yet added to the Repository

No splitter added to second cluster

45. A new RecoverPoint system is being installed and the RPAs need to be upgraded to the latest version.

How should this be done?

Choose the option to upgrade the RPA version from an ISO while installing RecoverPoint using Deployment Manager.

Before doing the install ensure all the RPAs IP addresses reach each other. Connect to RPA1 with boxmgmt and do the upgrade.

Install the new system with Deployment Manager and then log in as boxmgmt and perform the upgrade on one RP

Upgrade the RPAs to the latest version first; otherwise Deployment Manager will prevent the installation.

46. After installing two RecoverPoint clusters you find that a Consistency Group cannot be configured with a remote copy.

Why?

Deployment Manager was not used to connect the clusters.

The RPAs at the second cluster are not the same type (virtual vs physical).

The second cluster has not yet been added to the Repository.

There is no splitter added to the second cluster.

47. A customer is interested in implementing a RecoverPoint solution using a four-node cluster with physical RPAs.

How many total IP addresses are required for the cluster?

48. A customer wants to implement a two-node RecoverPoint solution with local replication. How many IP addresses are required for each cluster?

49. A customer environment includes a two-cluster RecoverPoint/SE instance. They have a new data center 100 km away that they wish to protect with RecoverPoint.

What steps are required to connect a new cluster to their existing RecoverPoint instance?

Use Deployment Manager to convert the existing instance to RP/E

Use Deployment Manager to connect the new cluster to the existing instance. Install RP/EX licenses for their existing arrays.

Use Deployment Manager to connect the new cluster to the existing instance.

Install RP/SE licenses for their existing arrays. Install RP/SE licenses for the new cluster. Use Deployment Manager to connect the new cluster to the existing instance.

Install RP/CL licenses for their existing cluster. Use Deployment Manager to connect the new cluster to the existing instance.

50. A customer environment includes a two-cluster RecoverPoint/SE instance. They have a new data center 500 km away that they wish to protect with RecoverPoint.

What steps are required to connect a new cluster to their existing RecoverPoint instance?

Use Deployment Manager to convert the existing instance to RP/E

Use Deployment Manager to connect the new cluster to the existing instance. Install RP/EX licenses for their existing arrays.

Use Deployment Manager to connect the new cluster to the existing instance.

Install RP/SE licenses for their existing arrays. Install RP/SE licenses for the new cluster. Use Deployment Manager to connect the new cluster to the existing instance.

Install RP/CL licenses for their existing cluster. Use Deployment Manager to connect the new cluster to the existing instance.

Page 6 of 8

51. You are adding an RPA to a cluster using Deployment Manager.

What requirement must be satisfied before proceeding?

Zoning and LUN masking must be known to be identical to the existing RPAs in the cluster.

RPA iSCSI configuration settings must be known. All other zoning and LUN masking settings will automatically be read from the existing RPA site leader.

RPA and array iSCSI configuration settings must be known. All other zoning and LUN masking settings will automatically be read from the existing RPA site leader.

RPA and Storage iSCSI configuration settings will automatically be read from the cluster.

52. Which RecoverPoint tool is used for system conversions?

Deployment Manager

Unisphere for RecoverPoint

SolVe Desktop

BCSD Sizing

53. You are implementing a RecoverPoint/SE cluster using vRPAs.

What must be configured and available on the new VNX array prior to the installation of the cluster with Deployment Manager?

An iSCSI interface from SPA and SPB of the VNX

Zones from SPA and SPB FC ports to the ESX servers

Zones from SPA and SPB FC ports to the Virtual WWNs of the vRPAs

Physical connections from the ESX HBAs to the FC interfaces of SPA and SPB

54. A RecoverPoint/SE cluster is using vRPAs. A second cluster needs to be connected.

Which RPA type must be used at the new cluster?

Virtual or Physical

Virtual only

Generation 5

Physical only

55. A customer is evaluating the deployment of RecoverPoint with their VMAX array. They want to deploy the RPAs in the virtual appliance form. They ask your opinion about using vRPA versus physical appliances.

What should you advise them?

They can only use physical RPAs in the current environment.

For performance reasons, they can mix vRPAs and physical RPAs in the same RPA cluster, but only at remote sites.

For performance reasons, they cannot mix physical and vRPAs within an RPA cluster.

They can mix vRPA and physical RPAs in the same RPA cluster at all sites.

56. A customer is evaluating the deployment of RecoverPoint with their VNX array. They want to deploy the RPAs in virtual appliance form. They ask your opinion about using vRPA versus physical appliances.

What should you advise them?

They cannot mix physical and virtual RPAs within their RPA cluster.

For performance reasons, they can mix vRPAs and physical RPAs in the remote RPA cluster.

vRPAs cannot be used in a VNX environment.

They can mix vRPA and physical RPAs in the same RPA cluster at all sites.

57. A customer is installing a single cluster RecoverPoint/SE environment and has decided to create a cluster of six virtual RPAs to perform RecoverPoint operations.

According to EMC best practices, how many ESX hosts are needed to host the required vRPAs?

58. A customer environment uses VMAX arrays for production storage. The customer wants to implement RecoverPoint for data protection. Having researched vRPAs, they want to use this technology as well.

What should you advise them?

vRPAs are only supported with VNX arrays

Add iSCSI interfaces to their VMAX arrays

Use vRPAs with FC connections to the SAN

Implement FCoE for connections from the vRPAs

59. What is a prerequisite for deploying a RecoverPoint/SE system?

VNX splitter enabled

RecoverPoint/SE license installed

RecoverPoint/SE registered with EMC

Unisphere for RecoverPoint installed and running

60. When selecting the semi-automatic zoning method while installing RecoverPoint/SE, which zones are displayed per RPA?

One RPA HBA zoned to SP-A One RPA HBA zoned to SP-B All RPA HBAs zoned to each other

All RPA HBAs zoned to SP-A All RPA HBAs zoned to SP-B All RPA HBAs zoned to each other

All RPA HBAs zoned to SP-A All RPA HBAs zoned to SP-B One RPA HBA zoned to multiple HBA ports on each of the other RPAs in the cluster

One RPA HBA zoned to SP-A One RPA HBA zoned to SP-B One RPA HBA zoned to a single HBA on each of the other RPAs in the cluster

Page 7 of 8

61. Which statement is true regarding vRPAs?

vRPAs are deployed using the OVA template.

The proper license must be installed before vRPA deployment.

vRPAs can be connected to storage through the VNX splitter in the RecoverPoint/SE system.

vRPAs are installed using Unisphere for RecoverPoint.

62. Which statement is true regarding vRPAs?

vCenter Server is required to deploy vRPAs.

The proper license must be installed before vRPA deployment.

vRPAs can be connected to storage through the VNX splitter in the RecoverPoint/SE system.

vRPAs are installed using Unisphere for RecoverPoint.

63. Which Unisphere for RecoverPoint view displays both the system traffic and Consistency Group status?

RecoverPoint Dashboard

Recovery

RPA Clusters

Admin

64. In the Recovery tab of Unisphere for RecoverPoint, which option is used to temporarily mount an image?

Test a Copy

Enable Image Access

Manage Recovery

Enable Direct Access

65. After selecting a cluster in the RPA Clusters tab, which option can display alerts that have been logged for any of the physical components of the RecoverPoint system in that cluster?

General Cluster Info

Overall Health

System Events

System Notifications

66. In Unisphere for RecoverPoint, where should a user navigate in order to collect logs for support purposes?

Admin Tab > System Analysis Tools > Collect System Information

Admin Tab > System Notifications > Configure System Reports and Alerts

Dashboard Tab > System Analysis Tools > Detect Bottlenecks

Admin Tab > RPA Clusters > Export Consolidated Statistics

67. The Getting Started wizard that is displayed the first time a user accesses Unisphere for RecoverPoint assists with performing what action?

Adding licenses

Adding splitters

Configuring RPAs

Creating Consistency Groups

68. System events can be copied to the clipboard from which Unisphere for RecoverPoint view?

RecoverPoint Dashboard

Recovery

RPA Clusters

Admin

69. When logging into an unattached RecoverPoint appliance for the first time, which username and password combination must be used?

usernam

boxmgmt passwor

boxmgmt

usernam

admin passwor

Mi@Dim7T

usernam

admin passwor

admin

usernam

service passwor

service

70. You are working on a RecoverPoint local replication solution in an environment that includes VNX and VMAX storage arrays. You want to create a Consistency Group (CG) for your Oracle database. However, some of the database volumes are located in the VNX and others are located in the VMAX.

What is the recommended management solution?

Create one CG using VNX and VMAX volumes

Create a new RecoverPoint cluster and add the VNX splitter

Migrate all LUNs to the VMAX

Create two CGs: one for VNX volumes and another for VMAX volumes

Page 8 of 8

71. Which journal action available in Unisphere for RecoverPoint will NOT result in a full sweep synchronization and the loss of all history in the existing journal?

Add a journal volume

Remove a journal volume

Expand a journal volume

Reduce a journal volume

72. In order to create a new Consistency Group, a user should navigate to which option within the Protection tab of Unisphere for RecoverPoint?

Protect Volumes

Manage Protection

Deployment Manager

Group Sets

73. A company has a DR site connected using a 4 Gbps FC link and two RPAs on the primary site, and two RPAs at the DR site. They are experiencing high load events although the FC link is not fully utilized.

What would be the best solution to get the FC link utilization up as high as possible?

Add two RPAs to the primary site and add two RPAs to the DR site

Add two RPAs to the primary site only

Use distributed consistency groups with one primary RPA and two secondary RPAs on the primary site

Add two RPAs to the DR site only

74. Which RecoverPoint feature allows the protection of volumes on both sides of a VPLEX Metro Cluster?

MetroPoint

Continuous Remote Replication

Distributed Consistency Groups

Group Sets

75. A storage administrator has an implementation with 40 Consistency Groups (CGs). They need to create distributed CGs.

What is the maximum number of distributed CGs that can be added to this particular system?

128

76. A storage administrator has a RecoverPoint environment with vRPAs containing 64 Consistency Groups (CGs). They want to create distributed CGs.

What is the maximum number of distributed CGs that can be added to this particular system?

128

77. You are protecting a volume using the wizard in Unisphere for RecoverPoint.

Which state will the new Consistency Group be in immediately after completing the wizard?

Initializing

Active

Paused

Disabled

78. What is used when more performance is needed than a single RPA can provide for asynchronous replication?

Distributed Consistency Groups

Journal compression

Fibre Channel connections

Multi-cluster copies

D-RP-DY-A-24 Dell RecoverPoint Deploy Exam Online Dumps

D-RP-DY-A-24 Dell RecoverPoint Deploy Exam Online Dumps

Share this post

Leave a Reply Cancel reply

Related Posts